diff options
Diffstat (limited to 'board/munna/gpio.inc')
| -rw-r--r-- | board/munna/gpio.inc | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/board/munna/gpio.inc b/board/munna/gpio.inc deleted file mode 100644 index 50e5ee3a47..0000000000 --- a/board/munna/gpio.inc +++ /dev/null @@ -1,120 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. - */ - -/* Interrupts */ -GPIO_INT(USB_C0_PD_INT_ODL, PIN(B, 1), GPIO_INT_FALLING | GPIO_PULL_UP, - tcpc_alert_event) -GPIO_INT(POWER_BUTTON_L, PIN(A, 11), GPIO_INT_BOTH | GPIO_PULL_UP, - power_button_interrupt) /* EC_PWR_BTN_ODL */ -GPIO_INT(AP_IN_SLEEP_L, PIN(C, 12), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(PMIC_EC_RESETB, PIN(B, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(WARM_RESET_REQ, PIN(A, 3), GPIO_INT_RISING | GPIO_PULL_DOWN, - chipset_reset_request_interrupt) -GPIO_INT_RW(ACCEL_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_SEL_1P8V | GPIO_PULL_UP, - bmi160_interrupt) -GPIO_INT_RO(EMMC_CMD, PIN(B, 15), GPIO_INT_FALLING, - emmc_cmd_interrupt) -GPIO_INT(SPI1_NSS, PIN(A, 15), GPIO_INT_BOTH | GPIO_PULL_UP, - spi_event) /* SPI_AP_EC_CS_L */ -GPIO_INT(LID_OPEN, PIN(C, 5), GPIO_INT_BOTH, - lid_interrupt) -GPIO_INT(AC_PRESENT, PIN(A, 6), GPIO_INT_BOTH, - extpower_interrupt) /* ACOK_OD */ -GPIO_INT(BC12_EC_INT_ODL, PIN(C, 9), GPIO_INT_FALLING, - bc12_interrupt) -GPIO_INT(IT8801_SMB_INT, PIN(A, 8), GPIO_INT_FALLING | GPIO_PULL_UP, - io_expander_it8801_interrupt) /* KB_INT_ODL */ -GPIO_INT(AP_EC_WATCHDOG_L, PIN(D, 2), GPIO_INT_FALLING, - chipset_watchdog_interrupt) - -/* Unimplemented interrupts */ -GPIO(ALS_RGB_INT_ODL, PIN(C, 10), GPIO_INPUT) -GPIO(TABLET_MODE_L, PIN(B, 11), GPIO_INPUT) - -/* Reset pins */ -GPIO(AP_SYS_RST_L, PIN(C, 11), GPIO_OUT_LOW) -GPIO(PMIC_WATCHDOG_L, PIN(A, 2), GPIO_OUT_LOW) -GPIO(PMIC_EN_ODL, PIN(H, 0), GPIO_ODR_HIGH) - -/* - * I2C pins should be configured as inputs until I2C module is - * initialized. This will avoid driving the lines unintentionally. - */ -GPIO(I2C1_SCL, PIN(B, 8), GPIO_INPUT) -GPIO(I2C1_SDA, PIN(B, 9), GPIO_INPUT) -GPIO(I2C3_SCL, PIN(C, 0), GPIO_INPUT) -GPIO(I2C3_SDA, PIN(C, 1), GPIO_INPUT) -GPIO(I2C4_SCL, PIN(A, 5), GPIO_ODR_HIGH) -GPIO(I2C4_SDA, PIN(C, 4), GPIO_ODR_HIGH) - -/* Analog pins */ -GPIO(BOARD_ID, PIN(A, 0), GPIO_ANALOG) -GPIO(EC_SKU_ID, PIN(B, 0), GPIO_ANALOG) - -/* Other input pins */ -GPIO(WP_L, PIN(C, 8), GPIO_INPUT) /* EC_FLASH_WP_ODL */ -GPIO(BOOT0, PIN(H, 3), GPIO_INPUT) -GPIO(CCD_MODE_ODL, PIN(A, 1), GPIO_INPUT) - -/* Other output pins */ -GPIO(EC_BATT_PRES_ODL, PIN(A, 7), GPIO_INPUT) -GPIO(EC_BL_EN_OD, PIN(A, 13), GPIO_ODR_HIGH) -GPIO(EN_USBA_5V, PIN(C, 14), GPIO_OUT_LOW) -GPIO(EC_SENSOR_SPI_MISO, PIN(C, 2), GPIO_INPUT) -GPIO(EC_SENSOR_SPI_MOSI, PIN(C, 3), GPIO_OUT_LOW) -GPIO(EC_SENSOR_SPI_NSS, PIN(B, 12), GPIO_OUT_HIGH) -GPIO(EC_SENSOR_SPI_CK, PIN(B, 10), GPIO_OUT_LOW) -GPIO(ENTERING_RW, PIN(C, 6), GPIO_ODR_HIGH) /* EC_ENTERING_RW_ODL */ -GPIO(EC_INT_L, PIN(C, 7), GPIO_ODR_HIGH) /* EC_AP_INT_ODL */ -GPIO(EC_BOARD_ID_EN_L, PIN(C, 15), GPIO_ODR_HIGH) /* EC_BOARD_ID_EN_ODL */ -GPIO(USB_C0_HPD_OD, PIN(H, 1), GPIO_ODR_LOW) -GPIO(BOOTBLOCK_EN_L, PIN(A, 12), GPIO_ODR_HIGH) -GPIO(EN_PP1800_S5_L, PIN(A, 14), GPIO_OUT_LOW) -GPIO(USB_C0_DISCHARGE, PIN(B, 6), GPIO_OUT_LOW) - -IOEX(PWR_LED_WHITE_L, EXPIN(0, 1, 4), GPIO_OUT_HIGH) -IOEX(BAT_LED_GREEN_FULL_L, EXPIN(0, 1, 3), GPIO_OUT_HIGH) -IOEX(BAT_LED_RED_L, EXPIN(0, 1, 2), GPIO_OUT_HIGH) -IOEX(KB_BL_EN, EXPIN(0, 0, 7), GPIO_OUT_LOW) - -/* - * TODO(b:138352732): On IT88801 expander, To be readded once IT8801 driver and - * gpio expander framework has landed. - */ -UNIMPLEMENTED(EN_PP5000_USBC) -UNIMPLEMENTED(PMIC_FORCE_RESET_ODL) -UNIMPLEMENTED(EN_USBC_CHARGE_L) - -/* USART1: PA9/PA10 */ -ALTERNATE(PIN_MASK(A, 0x0600), 7, MODULE_UART, 0) -/* I2C MASTER: PB8/9 */ -ALTERNATE(PIN_MASK(B, 0x0300), 4, MODULE_I2C, GPIO_ODR_HIGH ) -/* I2C MASTER: PC0/C1 */ -ALTERNATE(PIN_MASK(C, 0x0003), 4, MODULE_I2C, GPIO_ODR_HIGH ) - - -/* SPI1 */ -/* SPI SLAVE: PB3/4/5 */ -ALTERNATE(PIN_MASK(B, 0x0038), 5, MODULE_SPI, 0) -/* SPI SLAVE CS: PA15 */ -ALTERNATE(PIN_MASK(A, 0x8000), 5, MODULE_SPI, 0) - -/* SPI2 */ -/* Shared between slave for emmc and master for bmi160 */ -/* They're mutually exclusive with gpio_config_module. */ -/* EMMC SPI SLAVE: PB13/14/15 */ -ALTERNATE(PIN_MASK(B, 0xE000), 5, MODULE_SPI_FLASH, 0) -/* SENSORS SPI MASTER: PB10, PB12, PC2, PC3 */ -ALTERNATE(PIN_MASK(B, 0x0400), 5, MODULE_SPI_CONTROLLER, 0) -ALTERNATE(PIN_MASK(C, 0x000C), 5, MODULE_SPI_CONTROLLER, 0) |