summaryrefslogtreecommitdiff
path: root/board/munna
diff options
context:
space:
mode:
Diffstat (limited to 'board/munna')
-rw-r--r--board/munna/battery.c104
-rw-r--r--board/munna/board.c595
-rw-r--r--board/munna/board.h190
-rw-r--r--board/munna/build.mk15
-rw-r--r--board/munna/ec.tasklist20
-rw-r--r--board/munna/gpio.inc120
-rw-r--r--board/munna/led.c115
-rw-r--r--board/munna/vif_override.xml3
8 files changed, 0 insertions, 1162 deletions
diff --git a/board/munna/battery.c b/board/munna/battery.c
deleted file mode 100644
index 1b162e93c7..0000000000
--- a/board/munna/battery.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "battery.h"
-#include "battery_fuel_gauge.h"
-#include "gpio.h"
-
-const struct board_batt_params board_battery_info[] = {
- /* LGC L20L3PG2, Gauge IC: RAJ240047A20DNP. */
- [BATTERY_LGC] = {
- .fuel_gauge = {
- .manuf_name = "LGC",
- .device_name = "L20L3PG2",
- .ship_mode = {
- .reg_addr = 0x34,
- .reg_data = { 0x0000, 0x1000 },
- },
- .fet = {
- .reg_addr = 0x34,
- .reg_mask = 0x0100,
- .disconnect_val = 0x0100,
- }
- },
- .batt_info = {
- .voltage_max = 13050, /* mV */
- .voltage_normal = 11400, /* mV */
- .voltage_min = 9000, /* mV */
- .precharge_current = 256, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 50,
- .charging_min_c = 0,
- .charging_max_c = 60,
- .discharging_min_c = -20,
- .discharging_max_c = 73,
- },
- },
- /* Sunwoda L20D3PG2, Gauge IC: BQ40Z697A. */
- [BATTERY_SUNWODA] = {
- .fuel_gauge = {
- .manuf_name = "Sunwoda",
- .device_name = "L20D3PG2",
- .ship_mode = {
- .reg_addr = 0x34,
- .reg_data = { 0x0000, 0x1000 },
- },
- .fet = {
- .reg_addr = 0x34,
- .reg_mask = 0x0100,
- .disconnect_val = 0x0100,
- }
- },
- .batt_info = {
- .voltage_max = 13050, /* mV */
- .voltage_normal = 11250, /* mV */
- .voltage_min = 9000, /* mV */
- .precharge_current = 200, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 50,
- .charging_min_c = 0,
- .charging_max_c = 60,
- .discharging_min_c = -20,
- .discharging_max_c = 60,
- },
- },
-
- /* SIMPLO L20M3PG2, Gauge IC: BQ40Z697A. */
- [BATTERY_SMP] = {
- .fuel_gauge = {
- .manuf_name = "SMP",
- .device_name = "L20M3PG2",
- .ship_mode = {
- .reg_addr = 0x34,
- .reg_data = { 0x0000, 0x1000 },
- },
- .fet = {
- .reg_addr = 0x34,
- .reg_mask = 0x0100,
- .disconnect_val = 0x0100,
- },
- },
- .batt_info = {
- .voltage_max = 13050, /* mV */
- .voltage_normal = 11250, /* mV */
- .voltage_min = 9000, /* mV */
- .precharge_current = 256, /* mA */
- .start_charging_min_c = 0,
- .start_charging_max_c = 45,
- .charging_min_c = 0,
- .charging_max_c = 45,
- .discharging_min_c = -40,
- .discharging_max_c = 73,
- },
- },
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC;
-
-enum battery_present battery_hw_present(void)
-{
- return gpio_get_level(GPIO_EC_BATT_PRES_ODL) ? BP_NO : BP_YES;
-}
diff --git a/board/munna/board.c b/board/munna/board.c
deleted file mode 100644
index f31c7a7e39..0000000000
--- a/board/munna/board.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "adc.h"
-#include "backlight.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_ramp.h"
-#include "charge_state.h"
-#include "charger.h"
-#include "chipset.h"
-#include "common.h"
-#include "console.h"
-#include "driver/accel_lis2dw12.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/battery/max17055.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/tcpm/fusb302.h"
-#include "driver/usb_mux/it5205.h"
-#include "ec_commands.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "i2c.h"
-#include "i2c_bitbang.h"
-#include "it8801.h"
-#include "keyboard_scan.h"
-#include "keyboard_backlight.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "registers.h"
-#include "spi.h"
-#include "system.h"
-#include "task.h"
-#include "tcpm/tcpm.h"
-#include "timer.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd_tcpm.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-static void tcpc_alert_event(enum gpio_signal signal)
-{
- schedule_deferred_pd_interrupt(0 /* port */);
-}
-
-#include "gpio_list.h"
-
-/******************************************************************************/
-/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
-const struct adc_t adc_channels[] = {
- [ADC_BOARD_ID] = {"BOARD_ID", 3300, 4096, 0, STM32_AIN(5),
- STM32_RANK(1)},
- [ADC_EC_SKU_ID] = {"EC_SKU_ID", 3300, 4096, 0, STM32_AIN(15),
- STM32_RANK(2)},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/******************************************************************************/
-/* I2C ports */
-const struct i2c_port_t i2c_ports[] = {
- {"typec", 0, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
- {"other", 2, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-const struct i2c_port_t i2c_bitbang_ports[] = {
- {"battery", 3, 100, GPIO_I2C4_SCL, GPIO_I2C4_SDA, .drv = &bitbang_drv},
-};
-const unsigned int i2c_bitbang_ports_used = ARRAY_SIZE(i2c_bitbang_ports);
-
-#define BC12_I2C_ADDR PI3USB9201_I2C_ADDR_3
-
-/* power signal list. Must match order of enum power_signal. */
-const struct power_signal_info power_signal_list[] = {
- {GPIO_AP_IN_SLEEP_L, POWER_SIGNAL_ACTIVE_LOW, "AP_IN_S3_L"},
- {GPIO_PMIC_EC_RESETB, POWER_SIGNAL_ACTIVE_HIGH, "PMIC_PWR_GOOD"},
-};
-BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);
-
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
- /*
- * TODO(b/133200075): Tune this once we have the final performance
- * out of the driver and the i2c bus.
- */
- .output_settle_us = 35,
- .debounce_down_us = 5 * MSEC,
- .debounce_up_us = 40 * MSEC,
- .scan_period_us = 10 * MSEC,
- .min_post_scan_delay_us = 10 * MSEC,
- .poll_timeout_us = 100 * MSEC,
- .actual_key_mask = {
- 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
- 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */
- },
-};
-
-struct ioexpander_config_t ioex_config[CONFIG_IO_EXPANDER_PORT_COUNT] = {
- [0] = {
- .i2c_host_port = IT8801_KEYBOARD_PWM_I2C_PORT,
- .i2c_addr_flags = IT8801_I2C_ADDR1,
- .drv = &it8801_ioexpander_drv,
- },
-};
-
-/******************************************************************************/
-/* SPI devices */
-const struct spi_device_t spi_devices[] = {
- { CONFIG_SPI_ACCEL_PORT, 2, GPIO_EC_SENSOR_SPI_NSS },
-};
-const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
-
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
- {
- .i2c_port = I2C_PORT_BC12,
- .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
- },
-};
-
-/******************************************************************************/
-const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- {
- .bus_type = EC_BUS_TYPE_I2C,
- .i2c_info = {
- .port = I2C_PORT_TCPC0,
- .addr_flags = FUSB302_I2C_ADDR_FLAGS,
- },
- .drv = &fusb302_tcpm_drv,
- },
-};
-
-static void board_hpd_status(const struct usb_mux *me,
- mux_state_t mux_state)
-{
- /*
- * svdm_dp_attention() did most of the work, we only need to notify
- * host here.
- */
- host_set_single_event(EC_HOST_EVENT_USB_MUX);
-}
-
-const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
- {
- .usb_port = 0,
- .i2c_port = I2C_PORT_USB_MUX,
- .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS,
- .driver = &it5205_usb_mux_driver,
- .hpd_update = &board_hpd_status,
- },
-};
-
-/* Charger config. Start i2c address at 1, update during runtime */
-struct charger_config_t chg_chips[] = {
- {
- .i2c_port = 2,
- .i2c_addr_flags = ISL923X_ADDR_FLAGS,
- .drv = &isl923x_drv,
- },
-};
-
-/* Board version depends on ADCs, so init i2c port after ADC */
-static void charger_config_complete(void)
-{
- chg_chips[0].i2c_port = board_get_charger_i2c();
-}
-DECLARE_HOOK(HOOK_INIT, charger_config_complete, HOOK_PRIO_INIT_ADC + 1);
-
-uint16_t tcpc_get_alert_status(void)
-{
- uint16_t status = 0;
-
- if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL))
- status |= PD_STATUS_TCPC_ALERT_0;
-
- return status;
-}
-
-static int force_discharge;
-
-int board_set_active_charge_port(int charge_port)
-{
- CPRINTS("New chg p%d", charge_port);
-
- /* ignore all request when discharge mode is on */
- if (force_discharge && charge_port != CHARGE_PORT_NONE)
- return EC_SUCCESS;
-
- switch (charge_port) {
- case CHARGE_PORT_USB_C:
- /* Don't charge from a source port */
- if (board_vbus_source_enabled(charge_port))
- return -1;
- break;
- case CHARGE_PORT_NONE:
- /*
- * To ensure the fuel gauge (max17055) is always powered
- * even when battery is disconnected, keep VBAT rail on but
- * set the charging current to minimum.
- */
- charger_set_current(CHARGER_SOLO, 0);
- break;
- default:
- panic("Invalid charge port\n");
- break;
- }
-
- return EC_SUCCESS;
-}
-
-void board_set_charge_limit(int port, int supplier, int charge_ma,
- int max_ma, int charge_mv)
-{
- charge_ma = (charge_ma * 95) / 100;
- charge_set_input_current_limit(MAX(charge_ma,
- CONFIG_CHARGER_INPUT_CURRENT), charge_mv);
-}
-
-int board_discharge_on_ac(int enable)
-{
- int ret, port;
-
- if (enable) {
- port = CHARGE_PORT_NONE;
- } else {
- /* restore the charge port state */
- port = charge_manager_get_override();
- if (port == OVERRIDE_OFF)
- port = charge_manager_get_active_charge_port();
- }
-
- ret = charger_discharge_on_ac(enable);
- if (ret)
- return ret;
-
- force_discharge = enable;
- return board_set_active_charge_port(port);
-}
-
-int pd_snk_is_vbus_provided(int port)
-{
- /* TODO(b:138352732): read IT8801 GPIO EN_USBC_CHARGE_L */
- return EC_ERROR_UNIMPLEMENTED;
-}
-
-void bc12_interrupt(enum gpio_signal signal)
-{
- task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12);
-}
-
-#ifndef VARIANT_KUKUI_NO_SENSORS
-static void board_spi_enable(void)
-{
- /*
- * Pin mux spi peripheral away from emmc, since RO might have
- * left them there.
- */
- gpio_config_module(MODULE_SPI_FLASH, 0);
-#ifdef CHIP_FAMILY_STM32L4
- /* Set I/O speed before AF configured */
- /* EMMC SPI SLAVE: PB13/14/15 */
- /* SENSORS SPI MASTER: PB10, PB12, PC2, PC3 */
- STM32_GPIO_OSPEEDR(GPIO_B) |= 0xFF300000;
- STM32_GPIO_OSPEEDR(GPIO_C) |= 0x000000F0;
-
- /* Enable clocks to SPI2 module. */
- STM32_RCC_APB1ENR1 |= STM32_RCC_PB1_SPI2;
-
- /* Reset SPI2 to clear state left over from the emmc slave. */
- STM32_RCC_APB1RSTR1 |= STM32_RCC_PB1_SPI2;
- STM32_RCC_APB1RSTR1 &= ~STM32_RCC_PB1_SPI2;
-#else
- /* Enable clocks to SPI2 module. */
- STM32_RCC_APB1ENR |= STM32_RCC_PB1_SPI2;
-
- /* Reset SPI2 to clear state left over from the emmc slave. */
- STM32_RCC_APB1RSTR |= STM32_RCC_PB1_SPI2;
- STM32_RCC_APB1RSTR &= ~STM32_RCC_PB1_SPI2;
-#endif
- /* Reinitialize spi peripheral. */
- spi_enable(&spi_devices[0], 1);
-
- /* Pin mux spi peripheral toward the sensor. */
- gpio_config_module(MODULE_SPI_CONTROLLER, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP,
- board_spi_enable,
- MOTION_SENSE_HOOK_PRIO - 1);
-
-static void board_spi_disable(void)
-{
- /* Set pins to a state calming the sensor down. */
- gpio_set_flags(GPIO_EC_SENSOR_SPI_CK, GPIO_OUT_LOW);
- gpio_set_level(GPIO_EC_SENSOR_SPI_CK, 0);
- gpio_config_module(MODULE_SPI_CONTROLLER, 0);
-
- /* Disable spi peripheral and clocks. */
- spi_enable(&spi_devices[0], 0);
-#ifdef CHIP_FAMILY_STM32L4
- STM32_RCC_APB1ENR1 &= ~STM32_RCC_PB1_SPI2;
-#else
- STM32_RCC_APB1ENR &= ~STM32_RCC_PB1_SPI2;
-#endif
-}
-DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN,
- board_spi_disable,
- MOTION_SENSE_HOOK_PRIO + 1);
-#endif /* !VARIANT_KUKUI_NO_SENSORS */
-
-static void board_init(void)
-{
- /* If the reset cause is external, pulse PMIC force reset. */
- if (system_get_reset_flags() == EC_RESET_FLAG_RESET_PIN) {
- gpio_set_level(GPIO_PMIC_FORCE_RESET_ODL, 0);
- msleep(100);
- gpio_set_level(GPIO_PMIC_FORCE_RESET_ODL, 1);
- }
-
- /* Enable TCPC alert interrupts */
- gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
-
-#ifndef VARIANT_KUKUI_NO_SENSORS
- /* Enable interrupts from BMI160 sensor. */
- gpio_enable_interrupt(GPIO_ACCEL_INT_ODL);
-
- /* For some reason we have to do this again in case of sysjump */
- board_spi_enable();
-#endif /* !VARIANT_KUKUI_NO_SENSORS */
-
- /* Enable interrupt from PMIC. */
- gpio_enable_interrupt(GPIO_PMIC_EC_RESETB);
-
- /* Enable BC12 interrupt */
- gpio_enable_interrupt(GPIO_BC12_EC_INT_ODL);
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-#ifndef VARIANT_KUKUI_NO_SENSORS
-/* Motion sensors */
-/* Mutexes */
-static struct mutex g_lid_mutex;
-static struct mutex g_base_mutex;
-
-/* Rotation matrixes */
-static const mat33_fp_t base_standard_ref = {
- {0, FLOAT_TO_FP(1), 0},
- {FLOAT_TO_FP(-1), 0, 0},
- {0, 0, FLOAT_TO_FP(1)}
-};
-
-static const mat33_fp_t lid_standard_ref = {
- {FLOAT_TO_FP(-1), 0, 0},
- {0, FLOAT_TO_FP(1), 0},
- {0, 0, FLOAT_TO_FP(-1) }
-};
-
-/* sensor private data */
-/* Lid accel private data */
-static struct stprivate_data g_lis2dwl_data;
-/* Base accel private data */
-static struct bmi_drv_data_t g_bmi160_data;
-
-struct motion_sensor_t motion_sensors[] = {
- [LID_ACCEL] = {
- .name = "Lid Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_LIS2DWL,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_LID,
- .drv = &lis2dw12_drv,
- .mutex = &g_lid_mutex,
- .drv_data = &g_lis2dwl_data,
- .port = I2C_PORT_SENSORS,
- .i2c_spi_addr_flags = LIS2DWL_ADDR1_FLAGS,
- .rot_standard_ref = &lid_standard_ref,
- .default_range = 2, /* g */
- .min_frequency = LIS2DW12_ODR_MIN_VAL,
- .max_frequency = LIS2DW12_ODR_MAX_VAL,
- .config = {
- /* EC use accel for angle detection */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 12500 | ROUND_UP_FLAG,
- },
- /* Sensor on for lid angle detection */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- },
- },
- },
- /*
- * Note: bmi160: supports accelerometer and gyro sensor
- * Requirement: accelerometer sensor must init before gyro sensor
- * DO NOT change the order of the following table.
- */
- [BASE_ACCEL] = {
- .name = "Accel",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_ACCEL,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi160_data,
- .port = CONFIG_SPI_ACCEL_PORT,
- .i2c_spi_addr_flags = ACCEL_MK_SPI_ADDR_FLAGS(CONFIG_SPI_ACCEL_PORT),
- .rot_standard_ref = &base_standard_ref,
- .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */
- .min_frequency = BMI_ACCEL_MIN_FREQ,
- .max_frequency = BMI_ACCEL_MAX_FREQ,
- .config = {
- /* EC use accel for angle detection */
- [SENSOR_CONFIG_EC_S0] = {
- .odr = 10000 | ROUND_UP_FLAG,
- .ec_rate = 100 * MSEC,
- },
- /* Sensor on for angle detection */
- [SENSOR_CONFIG_EC_S3] = {
- .odr = 10000 | ROUND_UP_FLAG,
- .ec_rate = 100 * MSEC,
- },
- },
- },
- [BASE_GYRO] = {
- .name = "Gyro",
- .active_mask = SENSOR_ACTIVE_S0_S3,
- .chip = MOTIONSENSE_CHIP_BMI160,
- .type = MOTIONSENSE_TYPE_GYRO,
- .location = MOTIONSENSE_LOC_BASE,
- .drv = &bmi160_drv,
- .mutex = &g_base_mutex,
- .drv_data = &g_bmi160_data,
- .port = CONFIG_SPI_ACCEL_PORT,
- .i2c_spi_addr_flags = ACCEL_MK_SPI_ADDR_FLAGS(CONFIG_SPI_ACCEL_PORT),
- .default_range = 1000, /* dps */
- .rot_standard_ref = &base_standard_ref,
- .min_frequency = BMI_GYRO_MIN_FREQ,
- .max_frequency = BMI_GYRO_MAX_FREQ,
- },
-};
-const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-const struct it8801_pwm_t it8801_pwm_channels[] = {
- [IT8801_PWM_CH_KBLIGHT] = {.index = 4},
-};
-
-void board_kblight_init(void)
-{
- kblight_register(&kblight_it8801);
-}
-
-bool board_has_kb_backlight(void)
-{
- /* Default enable keyboard backlight */
- return true;
-}
-#endif /* !VARIANT_KUKUI_NO_SENSORS */
-
-/* Battery functions */
-#define SB_SMARTCHARGE 0x26
-/* Quick charge enable bit */
-#define SMART_QUICK_CHARGE 0x02
-/* Quick charge support bit */
-#define MODE_QUICK_CHARGE_SUPPORT 0x01
-
-static void sb_quick_charge_mode(int enable)
-{
- int val, rv;
-
- rv = sb_read(SB_SMARTCHARGE, &val);
- if (rv || !(val & MODE_QUICK_CHARGE_SUPPORT))
- return;
-
- if (enable)
- val |= SMART_QUICK_CHARGE;
- else
- val &= ~SMART_QUICK_CHARGE;
-
- sb_write(SB_SMARTCHARGE, val);
-}
-
-/* Called on AP S0iX -> S0 transition */
-static void board_chipset_resume(void)
-{
-#ifndef VARIANT_KUKUI_NO_SENSORS
- if (board_has_kb_backlight())
- ioex_set_level(IOEX_KB_BL_EN, 1);
-#endif
-
- /* Normal charge mode */
- sb_quick_charge_mode(0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);
-DECLARE_HOOK(HOOK_INIT, board_chipset_resume, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S0 -> S0iX transition */
-static void board_chipset_suspend(void)
-{
-#ifndef VARIANT_KUKUI_NO_SENSORS
- if (board_has_kb_backlight())
- ioex_set_level(IOEX_KB_BL_EN, 0);
-#endif
-
- /* Quick charge mode */
- sb_quick_charge_mode(1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S5 -> S3 transition */
-static void board_chipset_startup(void)
-{
- gpio_set_level(GPIO_EN_USBA_5V, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT);
-
-/* Called on AP S3 -> S5 transition */
-static void board_chipset_shutdown(void)
-{
- gpio_set_level(GPIO_EN_USBA_5V, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT);
-
-int board_get_charger_i2c(void)
-{
- /* TODO(b:138415463): confirm the bus allocation for future builds */
- return I2C_PORT_CHARGER;
-}
-
-int board_get_battery_i2c(void)
-{
- return I2C_PORT_BATTERY;
-}
-
-#ifdef SECTION_IS_RW
-static int it8801_get_target_channel(enum pwm_channel *channel,
- int type, int index)
-{
- switch (type) {
- case EC_PWM_TYPE_GENERIC:
- *channel = index;
- break;
- default:
- return -1;
- }
-
- return *channel >= 1;
-}
-
-static enum ec_status
-host_command_pwm_set_duty(struct host_cmd_handler_args *args)
-{
- const struct ec_params_pwm_set_duty *p = args->params;
- enum pwm_channel channel;
- uint16_t duty;
-
- if (it8801_get_target_channel(&channel, p->pwm_type, p->index))
- return EC_RES_INVALID_PARAM;
-
- duty = (uint32_t) p->duty * 255 / 65535;
- it8801_pwm_set_raw_duty(channel, duty);
- it8801_pwm_enable(channel, p->duty > 0);
-
- return EC_RES_SUCCESS;
-}
-DECLARE_HOST_COMMAND(EC_CMD_PWM_SET_DUTY,
- host_command_pwm_set_duty,
- EC_VER_MASK(0));
-
-static enum ec_status
-host_command_pwm_get_duty(struct host_cmd_handler_args *args)
-{
- const struct ec_params_pwm_get_duty *p = args->params;
- struct ec_response_pwm_get_duty *r = args->response;
-
- enum pwm_channel channel;
-
- if (it8801_get_target_channel(&channel, p->pwm_type, p->index))
- return EC_RES_INVALID_PARAM;
-
- r->duty = (uint32_t) it8801_pwm_get_raw_duty(channel) * 65535 / 255;
- args->response_size = sizeof(*r);
-
- return EC_RES_SUCCESS;
-}
-DECLARE_HOST_COMMAND(EC_CMD_PWM_GET_DUTY,
- host_command_pwm_get_duty,
- EC_VER_MASK(0));
-#endif
diff --git a/board/munna/board.h b/board/munna/board.h
deleted file mode 100644
index baf68470e4..0000000000
--- a/board/munna/board.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Configuration for Munna */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#define VARIANT_KUKUI_JACUZZI
-#define VARIANT_KUKUI_BATTERY_SMART
-#define VARIANT_KUKUI_CHARGER_ISL9238
-#define VARIANT_KUKUI_EC_STM32L431
-
-#ifndef SECTION_IS_RW
-#define VARIANT_KUKUI_NO_SENSORS
-#endif /* SECTION_IS_RW */
-
-#include "baseboard.h"
-
-#undef CONFIG_CHIPSET_POWER_SEQ_VERSION
-#define CONFIG_CHIPSET_POWER_SEQ_VERSION 1
-#undef CONFIG_SYSTEM_UNLOCKED
-
-/* PLL configuration. Freq = STM32_HSE_CLOCK or HSI (16MHz) * n/m/r */
-#undef STM32_PLLM
-#undef STM32_PLLN
-#undef STM32_PLLR
-#define STM32_PLLM 1
-#ifdef STM32_HSE_CLOCK
-#define STM32_PLLN 12
-#else
-#define STM32_PLLN 10
-#endif
-#define STM32_PLLR 2
-
-#define STM32_USE_PLL
-
-#define CONFIG_BATTERY_HW_PRESENT_CUSTOM
-
-#define CONFIG_CHARGER_PSYS
-
-#define CONFIG_CHARGER_RUNTIME_CONFIG
-
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-#define CONFIG_EXTPOWER_GPIO
-#undef CONFIG_EXTPOWER_DEBOUNCE_MS
-#define CONFIG_EXTPOWER_DEBOUNCE_MS 200
-
-#define CONFIG_I2C_BITBANG
-#undef I2C_BITBANG_PORT_COUNT
-#define I2C_BITBANG_PORT_COUNT 1
-#undef CONFIG_I2C_NACK_RETRY_COUNT
-#define CONFIG_I2C_NACK_RETRY_COUNT 10
-#define CONFIG_SMBUS_PEC
-
-#define CONFIG_USB_PD_TCPM_FUSB302
-#define CONFIG_USB_PD_DISCHARGE_GPIO
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-
-#define CONFIG_USB_MUX_IT5205
-
-#define CONFIG_LED_ONOFF_STATES
-#define CONFIG_LED_POWER_LED
-
-#undef CONFIG_WATCHDOG_PERIOD_MS
-#define CONFIG_WATCHDOG_PERIOD_MS 4000
-
-
-/* Motion Sensors */
-#ifndef VARIANT_KUKUI_NO_SENSORS
-#define CONFIG_ACCEL_LIS2DWL /* Lid accel */
-#define CONFIG_ACCELGYRO_BMI160 /* Base accel */
-#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
- TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_ALS
-#define CONFIG_CMD_ACCEL_INFO
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-
-#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
-
-#ifdef SECTION_IS_RW
-#define CONFIG_IO_EXPANDER_IT8801_PWM
-#define CONFIG_KEYBOARD_BACKLIGHT
-#endif
-
-#endif /* VARIANT_KUKUI_NO_SENSORS */
-
-/* I2C ports */
-#define I2C_PORT_BC12 0
-#define I2C_PORT_TCPC0 0
-#define I2C_PORT_USB_MUX 0
-#define I2C_PORT_CHARGER 2
-#define I2C_PORT_SENSORS 2
-#define IT8801_KEYBOARD_PWM_I2C_PORT 2
-#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY
-#define I2C_PORT_BATTERY 3
-#define I2C_PORT_TCPC0 0
-
-#undef I2C_CONTROLLER_COUNT
-#undef I2C_PORT_COUNT
-#define I2C_CONTROLLER_COUNT 3
-#define I2C_PORT_COUNT 3
-
-/* IT8801 I2C address */
-#define IT8801_KEYBOARD_PWM_I2C_ADDR_FLAGS IT8801_I2C_ADDR1
-
-/* Enable Accel over SPI */
-#define CONFIG_SPI_ACCEL_PORT 0 /* The first SPI master port (SPI2) */
-
-#define CONFIG_KEYBOARD_PROTOCOL_MKBP
-#define CONFIG_MKBP_EVENT
-#define CONFIG_MKBP_USE_GPIO
-/* Define the MKBP events which are allowed to wakeup AP in S3. */
-#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \
- (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\
- EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON))
-
-#undef CONFIG_GMR_TABLET_MODE
-#undef GMR_TABLET_MODE_GPIO_L
-#undef CONFIG_TABLET_MODE
-#undef CONFIG_TABLET_MODE_SWITCH
-
-#ifndef __ASSEMBLER__
-
-enum adc_channel {
- /* Real ADC channels begin here */
- ADC_BOARD_ID = 0,
- ADC_EC_SKU_ID,
- ADC_CH_COUNT
-};
-
-/* power signal definitions */
-enum power_signal {
- AP_IN_S3_L,
- PMIC_PWR_GOOD,
-
- /* Number of signals */
- POWER_SIGNAL_COUNT,
-};
-
-/* Motion sensors */
-enum sensor_id {
- LID_ACCEL = 0,
- BASE_ACCEL,
- BASE_GYRO,
- SENSOR_COUNT,
-};
-
-enum charge_port {
- CHARGE_PORT_USB_C,
-};
-
-enum battery_type {
- BATTERY_LGC,
- BATTERY_SUNWODA,
- BATTERY_SMP,
- BATTERY_TYPE_COUNT,
-};
-
-enum pwm_channel {
- IT8801_PWM_CH_KBLIGHT = 0,
-};
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-#ifdef SECTION_IS_RO
-/* Interrupt handler for emmc task */
-void emmc_cmd_interrupt(enum gpio_signal signal);
-#endif
-
-void bc12_interrupt(enum gpio_signal signal);
-void board_reset_pd_mcu(void);
-int board_get_version(void);
-
-/* returns the i2c port number of charger/battery */
-int board_get_charger_i2c(void);
-int board_get_battery_i2c(void);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/munna/build.mk b/board/munna/build.mk
deleted file mode 100644
index 594bac4de9..0000000000
--- a/board/munna/build.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- makefile -*-
-# Copyright 2021 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-#
-# STmicro STM32L431RCI
-CHIP:=stm32
-CHIP_FAMILY:=stm32l4
-CHIP_VARIANT:=stm32l431x
-BASEBOARD:=kukui
-
-board-y=battery.o board.o led.o
diff --git a/board/munna/ec.tasklist b/board/munna/ec.tasklist
deleted file mode 100644
index 6b29595620..0000000000
--- a/board/munna/ec.tasklist
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/**
- * See CONFIG_TASK_LIST in config.h for details.
- */
-#define CONFIG_TASK_LIST \
- TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(USB_CHG_P0, usb_charger_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(CHIPSET, chipset_task, NULL, TRENTA_TASK_STACK_SIZE) \
- TASK_ALWAYS_RW(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_ALWAYS(HOSTCMD, host_command_task, NULL, 1024) \
- TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
- TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, LARGER_TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_C0, pd_task, NULL, 1280) \
- TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, 1024) \
- TASK_ALWAYS_RO(EMMC, emmc_task, NULL, LARGER_TASK_STACK_SIZE)
diff --git a/board/munna/gpio.inc b/board/munna/gpio.inc
deleted file mode 100644
index 50e5ee3a47..0000000000
--- a/board/munna/gpio.inc
+++ /dev/null
@@ -1,120 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first.
- */
-
-/* Interrupts */
-GPIO_INT(USB_C0_PD_INT_ODL, PIN(B, 1), GPIO_INT_FALLING | GPIO_PULL_UP,
- tcpc_alert_event)
-GPIO_INT(POWER_BUTTON_L, PIN(A, 11), GPIO_INT_BOTH | GPIO_PULL_UP,
- power_button_interrupt) /* EC_PWR_BTN_ODL */
-GPIO_INT(AP_IN_SLEEP_L, PIN(C, 12), GPIO_INT_BOTH | GPIO_PULL_DOWN,
- power_signal_interrupt)
-GPIO_INT(PMIC_EC_RESETB, PIN(B, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN,
- power_signal_interrupt)
-GPIO_INT(WARM_RESET_REQ, PIN(A, 3), GPIO_INT_RISING | GPIO_PULL_DOWN,
- chipset_reset_request_interrupt)
-GPIO_INT_RW(ACCEL_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_SEL_1P8V | GPIO_PULL_UP,
- bmi160_interrupt)
-GPIO_INT_RO(EMMC_CMD, PIN(B, 15), GPIO_INT_FALLING,
- emmc_cmd_interrupt)
-GPIO_INT(SPI1_NSS, PIN(A, 15), GPIO_INT_BOTH | GPIO_PULL_UP,
- spi_event) /* SPI_AP_EC_CS_L */
-GPIO_INT(LID_OPEN, PIN(C, 5), GPIO_INT_BOTH,
- lid_interrupt)
-GPIO_INT(AC_PRESENT, PIN(A, 6), GPIO_INT_BOTH,
- extpower_interrupt) /* ACOK_OD */
-GPIO_INT(BC12_EC_INT_ODL, PIN(C, 9), GPIO_INT_FALLING,
- bc12_interrupt)
-GPIO_INT(IT8801_SMB_INT, PIN(A, 8), GPIO_INT_FALLING | GPIO_PULL_UP,
- io_expander_it8801_interrupt) /* KB_INT_ODL */
-GPIO_INT(AP_EC_WATCHDOG_L, PIN(D, 2), GPIO_INT_FALLING,
- chipset_watchdog_interrupt)
-
-/* Unimplemented interrupts */
-GPIO(ALS_RGB_INT_ODL, PIN(C, 10), GPIO_INPUT)
-GPIO(TABLET_MODE_L, PIN(B, 11), GPIO_INPUT)
-
-/* Reset pins */
-GPIO(AP_SYS_RST_L, PIN(C, 11), GPIO_OUT_LOW)
-GPIO(PMIC_WATCHDOG_L, PIN(A, 2), GPIO_OUT_LOW)
-GPIO(PMIC_EN_ODL, PIN(H, 0), GPIO_ODR_HIGH)
-
-/*
- * I2C pins should be configured as inputs until I2C module is
- * initialized. This will avoid driving the lines unintentionally.
- */
-GPIO(I2C1_SCL, PIN(B, 8), GPIO_INPUT)
-GPIO(I2C1_SDA, PIN(B, 9), GPIO_INPUT)
-GPIO(I2C3_SCL, PIN(C, 0), GPIO_INPUT)
-GPIO(I2C3_SDA, PIN(C, 1), GPIO_INPUT)
-GPIO(I2C4_SCL, PIN(A, 5), GPIO_ODR_HIGH)
-GPIO(I2C4_SDA, PIN(C, 4), GPIO_ODR_HIGH)
-
-/* Analog pins */
-GPIO(BOARD_ID, PIN(A, 0), GPIO_ANALOG)
-GPIO(EC_SKU_ID, PIN(B, 0), GPIO_ANALOG)
-
-/* Other input pins */
-GPIO(WP_L, PIN(C, 8), GPIO_INPUT) /* EC_FLASH_WP_ODL */
-GPIO(BOOT0, PIN(H, 3), GPIO_INPUT)
-GPIO(CCD_MODE_ODL, PIN(A, 1), GPIO_INPUT)
-
-/* Other output pins */
-GPIO(EC_BATT_PRES_ODL, PIN(A, 7), GPIO_INPUT)
-GPIO(EC_BL_EN_OD, PIN(A, 13), GPIO_ODR_HIGH)
-GPIO(EN_USBA_5V, PIN(C, 14), GPIO_OUT_LOW)
-GPIO(EC_SENSOR_SPI_MISO, PIN(C, 2), GPIO_INPUT)
-GPIO(EC_SENSOR_SPI_MOSI, PIN(C, 3), GPIO_OUT_LOW)
-GPIO(EC_SENSOR_SPI_NSS, PIN(B, 12), GPIO_OUT_HIGH)
-GPIO(EC_SENSOR_SPI_CK, PIN(B, 10), GPIO_OUT_LOW)
-GPIO(ENTERING_RW, PIN(C, 6), GPIO_ODR_HIGH) /* EC_ENTERING_RW_ODL */
-GPIO(EC_INT_L, PIN(C, 7), GPIO_ODR_HIGH) /* EC_AP_INT_ODL */
-GPIO(EC_BOARD_ID_EN_L, PIN(C, 15), GPIO_ODR_HIGH) /* EC_BOARD_ID_EN_ODL */
-GPIO(USB_C0_HPD_OD, PIN(H, 1), GPIO_ODR_LOW)
-GPIO(BOOTBLOCK_EN_L, PIN(A, 12), GPIO_ODR_HIGH)
-GPIO(EN_PP1800_S5_L, PIN(A, 14), GPIO_OUT_LOW)
-GPIO(USB_C0_DISCHARGE, PIN(B, 6), GPIO_OUT_LOW)
-
-IOEX(PWR_LED_WHITE_L, EXPIN(0, 1, 4), GPIO_OUT_HIGH)
-IOEX(BAT_LED_GREEN_FULL_L, EXPIN(0, 1, 3), GPIO_OUT_HIGH)
-IOEX(BAT_LED_RED_L, EXPIN(0, 1, 2), GPIO_OUT_HIGH)
-IOEX(KB_BL_EN, EXPIN(0, 0, 7), GPIO_OUT_LOW)
-
-/*
- * TODO(b:138352732): On IT88801 expander, To be readded once IT8801 driver and
- * gpio expander framework has landed.
- */
-UNIMPLEMENTED(EN_PP5000_USBC)
-UNIMPLEMENTED(PMIC_FORCE_RESET_ODL)
-UNIMPLEMENTED(EN_USBC_CHARGE_L)
-
-/* USART1: PA9/PA10 */
-ALTERNATE(PIN_MASK(A, 0x0600), 7, MODULE_UART, 0)
-/* I2C MASTER: PB8/9 */
-ALTERNATE(PIN_MASK(B, 0x0300), 4, MODULE_I2C, GPIO_ODR_HIGH )
-/* I2C MASTER: PC0/C1 */
-ALTERNATE(PIN_MASK(C, 0x0003), 4, MODULE_I2C, GPIO_ODR_HIGH )
-
-
-/* SPI1 */
-/* SPI SLAVE: PB3/4/5 */
-ALTERNATE(PIN_MASK(B, 0x0038), 5, MODULE_SPI, 0)
-/* SPI SLAVE CS: PA15 */
-ALTERNATE(PIN_MASK(A, 0x8000), 5, MODULE_SPI, 0)
-
-/* SPI2 */
-/* Shared between slave for emmc and master for bmi160 */
-/* They're mutually exclusive with gpio_config_module. */
-/* EMMC SPI SLAVE: PB13/14/15 */
-ALTERNATE(PIN_MASK(B, 0xE000), 5, MODULE_SPI_FLASH, 0)
-/* SENSORS SPI MASTER: PB10, PB12, PC2, PC3 */
-ALTERNATE(PIN_MASK(B, 0x0400), 5, MODULE_SPI_CONTROLLER, 0)
-ALTERNATE(PIN_MASK(C, 0x000C), 5, MODULE_SPI_CONTROLLER, 0)
diff --git a/board/munna/led.c b/board/munna/led.c
deleted file mode 100644
index fa4f46b6ab..0000000000
--- a/board/munna/led.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for Munna
- */
-#include "common.h"
-#include "ioexpander.h"
-#include "driver/ioexpander/it8801.h"
-#include "ec_commands.h"
-#include "led_common.h"
-#include "led_onoff_states.h"
-
-#define LED_ON_LVL 0
-#define LED_OFF_LVL 1
-
-__override const int led_charge_lvl_1 = 5;
-__override const int led_charge_lvl_2 = 97;
-
-__override struct led_descriptor
- led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
- [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_RED, LED_INDEFINITE} },
- [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
- [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN, LED_INDEFINITE} },
- [STATE_DISCHARGE_S0] = {{LED_OFF, LED_INDEFINITE} },
- [STATE_DISCHARGE_S3] = {{LED_OFF, LED_INDEFINITE} },
- [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} },
- [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC},
- {LED_OFF, 1 * LED_ONE_SEC} },
- [STATE_FACTORY_TEST] = {{EC_LED_COLOR_RED, 2 * LED_ONE_SEC},
- {EC_LED_COLOR_GREEN, 2 * LED_ONE_SEC} },
-};
-
-__override const struct led_descriptor
-led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = {
- [PWR_LED_STATE_ON] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
- [PWR_LED_STATE_SUSPEND_AC] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC},
- {LED_OFF, 3 * LED_ONE_SEC} },
- [PWR_LED_STATE_SUSPEND_NO_AC] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC},
- {LED_OFF, 3 * LED_ONE_SEC} },
- [PWR_LED_STATE_OFF] = {{LED_OFF, LED_INDEFINITE} },
-};
-
-const enum ec_led_id supported_led_ids[] = {
- EC_LED_ID_BATTERY_LED,
- EC_LED_ID_POWER_LED
-};
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-__override void led_set_color_battery(enum ec_led_colors color)
-{
- switch (color) {
- case EC_LED_COLOR_GREEN:
- ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_ON_LVL);
- ioex_set_level(IOEX_BAT_LED_RED_L, LED_OFF_LVL);
- break;
- case EC_LED_COLOR_AMBER:
- ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_ON_LVL);
- ioex_set_level(IOEX_BAT_LED_RED_L, LED_ON_LVL);
- break;
- case EC_LED_COLOR_RED:
- ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_OFF_LVL);
- ioex_set_level(IOEX_BAT_LED_RED_L, LED_ON_LVL);
- break;
- default: /* LED_OFF and other unsupported colors */
- ioex_set_level(IOEX_BAT_LED_GREEN_FULL_L, LED_OFF_LVL);
- ioex_set_level(IOEX_BAT_LED_RED_L, LED_OFF_LVL);
- break;
- }
-}
-
-__override void led_set_color_power(enum ec_led_colors color)
-{
- switch (color) {
- case EC_LED_COLOR_WHITE:
- ioex_set_level(IOEX_PWR_LED_WHITE_L, LED_ON_LVL);
- break;
- default:
- ioex_set_level(IOEX_PWR_LED_WHITE_L, LED_OFF_LVL);
- break;
- }
-}
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
- if (led_id == EC_LED_ID_BATTERY_LED) {
- brightness_range[EC_LED_COLOR_GREEN] = 1;
- brightness_range[EC_LED_COLOR_AMBER] = 1;
- brightness_range[EC_LED_COLOR_RED] = 1;
- } else if (led_id == EC_LED_ID_POWER_LED) {
- brightness_range[EC_LED_COLOR_WHITE] = 1;
- }
-}
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
- if (led_id == EC_LED_ID_BATTERY_LED) {
- if (brightness[EC_LED_COLOR_GREEN] != 0)
- led_set_color_battery(EC_LED_COLOR_GREEN);
- else if (brightness[EC_LED_COLOR_AMBER] != 0)
- led_set_color_battery(EC_LED_COLOR_AMBER);
- else if (brightness[EC_LED_COLOR_RED] != 0)
- led_set_color_battery(EC_LED_COLOR_RED);
- else
- led_set_color_battery(LED_OFF);
- } else if (led_id == EC_LED_ID_POWER_LED) {
- if (brightness[EC_LED_COLOR_WHITE] != 0)
- led_set_color_power(EC_LED_COLOR_WHITE);
- else
- led_set_color_power(LED_OFF);
- } else {
- return EC_ERROR_INVAL;
- }
- return EC_SUCCESS;
-}
diff --git a/board/munna/vif_override.xml b/board/munna/vif_override.xml
deleted file mode 100644
index 32736caf64..0000000000
--- a/board/munna/vif_override.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File
- Definition from the USB-IF.
--->
View Lorry Controller Status