diff options
Diffstat (limited to 'board/nami/board.h')
| -rw-r--r-- | board/nami/board.h | 79 |
1 files changed, 39 insertions, 40 deletions
diff --git a/board/nami/board.h b/board/nami/board.h index dde32b65f8..879fb443be 100644 --- a/board/nami/board.h +++ b/board/nami/board.h @@ -1,4 +1,4 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. +/* Copyright 2017 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -12,7 +12,7 @@ * By default, enable all console messages except ACPI and host event because * the sensor stack is generating a lot of activity. */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) +#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) /* EC */ #define CONFIG_ADC @@ -74,8 +74,8 @@ #define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK #define CONFIG_CHIPSET_RESET_HOOK #define CONFIG_HOST_INTERFACE_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S3 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S4 #define CONFIG_HOSTCMD_FLASH_SPI_INFO #define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_L_PGOOD @@ -87,8 +87,8 @@ #define CONFIG_BATTERY_SMART #define CONFIG_PWR_STATE_DISCHARGE_FULL #define CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD -#undef CONFIG_BATT_HOST_FULL_FACTOR -#define CONFIG_BATT_HOST_FULL_FACTOR 100 +#undef CONFIG_BATT_HOST_FULL_FACTOR +#define CONFIG_BATT_HOST_FULL_FACTOR 100 /* Charger */ #define CONFIG_CHARGE_MANAGER @@ -98,8 +98,8 @@ #define CONFIG_CHARGER_ISL9238 #define CONFIG_CHARGER_DISCHARGE_ON_AC #define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 27000 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 +#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 27000 +#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 /* AP's thresholds. */ #define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 3 #define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 27000 @@ -110,11 +110,11 @@ #define CONFIG_CMD_CHARGER_ADC_AMON_BMON #define CONFIG_HOSTCMD_PD_CONTROL #define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#undef CONFIG_EXTPOWER_DEBOUNCE_MS #define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 #define CONFIG_POWER_BUTTON #define CONFIG_POWER_BUTTON_X86 -#undef CONFIG_POWER_BUTTON_INIT_TIMEOUT +#undef CONFIG_POWER_BUTTON_INIT_TIMEOUT #define CONFIG_POWER_BUTTON_INIT_TIMEOUT 6 #define CONFIG_POWER_COMMON #define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 @@ -180,34 +180,33 @@ #define CONFIG_USBC_VCONN_SWAP #define CONFIG_USB_MUX_RUNTIME_CONFIG - /* BC 1.2 charger */ #define CONFIG_BC12_DETECT_PI3USB9281 #define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 /* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ +#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ +#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ +#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ /* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 -#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT1 -#define I2C_PORT_CHARGER NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_KBLIGHT NPCX_I2C_PORT2 -#define I2C_PORT_GYRO NPCX_I2C_PORT3 -#define I2C_PORT_ACCEL NPCX_I2C_PORT3 -#define I2C_PORT_THERMAL NPCX_I2C_PORT3 -#define I2C_PORT_ALS NPCX_I2C_PORT3 +#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 +#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 +#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 +#define I2C_PORT_EEPROM NPCX_I2C_PORT0_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT1 +#define I2C_PORT_CHARGER NPCX_I2C_PORT1 +#define I2C_PORT_PMIC NPCX_I2C_PORT2 +#define I2C_PORT_KBLIGHT NPCX_I2C_PORT2 +#define I2C_PORT_GYRO NPCX_I2C_PORT3 +#define I2C_PORT_ACCEL NPCX_I2C_PORT3 +#define I2C_PORT_THERMAL NPCX_I2C_PORT3 +#define I2C_PORT_ALS NPCX_I2C_PORT3 /* I2C addresses */ -#define I2C_ADDR_MP2949_FLAGS 0x20 -#define I2C_ADDR_EEPROM_FLAGS 0x50 +#define I2C_ADDR_MP2949_FLAGS 0x20 +#define I2C_ADDR_EEPROM_FLAGS 0x50 #ifndef __ASSEMBLER__ @@ -284,26 +283,26 @@ enum model_id { MODEL_BARD = 2, }; -#define SKU_ID_MASK_KBLIGHT BIT(0) -#define SKU_ID_MASK_CONVERTIBLE BIT(9) -#define SKU_ID_MASK_KEYPAD BIT(15) -#define SKU_ID_MASK_UK2 BIT(18) +#define SKU_ID_MASK_KBLIGHT BIT(0) +#define SKU_ID_MASK_CONVERTIBLE BIT(9) +#define SKU_ID_MASK_KEYPAD BIT(15) +#define SKU_ID_MASK_UK2 BIT(18) /* TODO(crosbug.com/p/61098): Verify the numbers below. */ /* * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ /* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 70000 -#define PD_MAX_CURRENT_MA 3500 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_OPERATING_POWER_MW 15000 +#define PD_MAX_POWER_MW 70000 +#define PD_MAX_CURRENT_MA 3500 +#define PD_MAX_VOLTAGE_MV 20000 /* Board specific handlers */ void board_reset_pd_mcu(void); @@ -319,7 +318,7 @@ extern uint32_t sku; extern uint8_t model; /* SKU_ID[24:31] are dedicated to OEM customization */ -#define CBI_SKU_CUSTOM_FIELD(val) ((val) >> 24) +#define CBI_SKU_CUSTOM_FIELD(val) ((val) >> 24) void ccd_mode_isr(enum gpio_signal signal); |