diff options
Diffstat (limited to 'board/nautilus')
| -rw-r--r-- | board/nautilus/analyzestack.yaml | 211 | ||||
| -rw-r--r-- | board/nautilus/battery.c | 224 | ||||
| -rw-r--r-- | board/nautilus/board.c | 781 | ||||
| -rw-r--r-- | board/nautilus/board.h | 247 | ||||
| -rw-r--r-- | board/nautilus/build.mk | 15 | ||||
| -rw-r--r-- | board/nautilus/ec.tasklist | 24 | ||||
| -rw-r--r-- | board/nautilus/gpio.inc | 125 | ||||
| -rw-r--r-- | board/nautilus/led.c | 136 | ||||
| -rw-r--r-- | board/nautilus/usb_pd_policy.c | 145 | ||||
| -rw-r--r-- | board/nautilus/vif_override.xml | 3 |
10 files changed, 0 insertions, 1911 deletions
diff --git a/board/nautilus/analyzestack.yaml b/board/nautilus/analyzestack.yaml deleted file mode 100644 index c9004e6376..0000000000 --- a/board/nautilus/analyzestack.yaml +++ /dev/null @@ -1,211 +0,0 @@ -# Size of extra stack frame needed by exception context switch. -# See core/cortex-m/switch.S -exception_frame_size: 224 -# Add some missing calls. -add: - # TCPC stuff: - tcpm_init.lto_priv.255[driver/tcpm/tcpm.h:77]: - - tcpci_tcpm_init - tcpm_release[driver/tcpm/tcpm.h:90]: - - ps8xxx_tcpm_release - tcpm_get_cc.lto_priv.246[driver/tcpm/tcpm.h:95]: - - tcpci_tcpm_get_cc - tcpm_select_rp_value[driver/tcpm/tcpm.h:105]: - - tcpci_tcpm_select_rp_value - tcpm_set_cc.lto_priv.239[driver/tcpm/tcpm.h:110]: - - tcpci_tcpm_set_cc - tcpm_set_polarity[driver/tcpm/tcpm.h:115]: - - tcpci_tcpm_set_polarity - tcpm_set_vconn.lto_priv.249[driver/tcpm/tcpm.h:120]: - - tcpci_tcpm_set_vconn - tcpm_set_msg_header[driver/tcpm/tcpm.h:125]: - - tcpci_tcpm_set_msg_header - tcpm_set_rx_enable.lto_priv.252[driver/tcpm/tcpm.h:131]: - - tcpci_tcpm_set_rx_enable - tcpm_get_message[driver/tcpm/tcpm.h:136]: - - tcpci_tcpm_get_message - tcpm_transmit[driver/tcpm/tcpm.h:142]: - - ps8xxx_tcpm_transmit - tcpc_alert[driver/tcpm/tcpm.h:147]: - - tcpci_tcpc_alert - tcpc_discharge_vbus[driver/tcpm/tcpm.h:152]: - - tcpci_tcpc_discharge_vbus - tcpm_set_drp_toggle[driver/tcpm/tcpm.h:163]: - - tcpci_tcpc_drp_toggle - tcpm_get_chip_info[driver/tcpm/tcpm.h:185]: - - tcpci_get_chip_info - board_tcpc_init[board/nautilus/board.c:233]: - - ps8xxx_tcpc_update_hpd_status - tcpci_tcpc_drp_toggle[driver/tcpm/tcpci.c:148]: - - None - # USB mux stuff - usb_mux_init[driver/usb_mux.c:25]: - - tcpci_tcpm_mux_init - usb_mux_init[driver/usb_mux.c:31]: - - None - usb_mux_set[driver/usb_mux.c:52]: - - tcpci_tcpm_mux_set - usb_mux_get[driver/usb_mux.c:71]: - - tcpci_tcpm_mux_get - usb_mux_flip[driver/usb_mux.c:92]: - - tcpci_tcpm_mux_get - usb_mux_flip[driver/usb_mux.c:103]: - - tcpci_tcpm_mux_set - hc_usb_pd_mux_info[driver/usb_mux.c:169]: - - tcpci_tcpm_mux_get - svdm_dp_post_config.lto_priv.271[board/nautilus/usb_pd_policy.c:363]: - - ps8xxx_tcpc_update_hpd_status - svdm_dp_attention.lto_priv.272[board/nautilus/usb_pd_policy.c:378]: - - ps8xxx_tcpc_update_hpd_status - svdm_exit_dp_mode.lto_priv.273[board/nautilus/usb_pd_policy.c:389]: - - ps8xxx_tcpc_update_hpd_status - # pd_svdm - pd_dfp_enter_mode[common/usb_pd_policy.c:459]: - - svdm_enter_dp_mode - dfp_consume_attention.lto_priv.259[common/usb_pd_policy.c:497]: - - svdm_dp_attention - pd_dfp_exit_mode[common/usb_pd_policy.c:563]: - - svdm_exit_dp_mode - pd_dfp_exit_mode[common/usb_pd_policy.c:580]: - - svdm_exit_dp_mode - pd_svdm[common/usb_pd_policy.c:767]: - - svdm_dp_status - pd_svdm[common/usb_pd_policy.c:778]: - - svdm_dp_config - pd_svdm[common/usb_pd_policy.c:784]: - - svdm_dp_post_config - # Motion sense - queue_advance_head[common/queue.c:105]: - - queue_action_null - queue_advance_tail[common/queue.c:116]: - - queue_action_null - motion_sense_set_data_rate[common/motion_sense.c:270]: - - set_data_rate[driver/accelgyro_bmi160.c] - - set_data_rate[driver/accel_bma2x2.c] - motion_sense_set_data_rate[common/motion_sense.c:289]: - - get_data_rate[driver/accelgyro_bmi160.c] - - get_data_rate[driver/accel_bma2x2.c] - motion_sense_set_ec_rate_from_ap[common/motion_sense.c:308]: - - get_data_rate[driver/accelgyro_bmi160.c] - - get_data_rate[driver/accel_bma2x2.c] - motion_sense_set_motion_intervals.lto_priv.303[common/motion_sense.c:414]: - - get_data_rate[driver/accelgyro_bmi160.c] - - get_data_rate[driver/accel_bma2x2.c] - motion_sense_init[common/motion_sense.c:450]: - - init[driver/accelgyro_bmi160.c] - - init[driver/accel_bma2x2.c] - sensor_init_done[common/motion_sense.c:471]: - - set_range[driver/accelgyro_bmi160.c] - - set_range[driver/accel_bma2x2.c] - sensor_init_done[common/motion_sense.c:474]: - - get_range[driver/accelgyro_bmi160.c] - - get_range[driver/accel_bma2x2.c] - motion_sense_process.isra.9[common/motion_sense.c:721]: - - irq_handler[driver/accelgyro_bmi160.c] - host_cmd_motion_sense[common/motion_sense.c:1251]: - - set_range[driver/accelgyro_bmi160.c] - - set_range[driver/accel_bma2x2.c] - host_cmd_motion_sense[common/motion_sense.c:1259]: - - get_range[driver/accelgyro_bmi160.c] - - get_range[driver/accel_bma2x2.c] - host_cmd_motion_sense[common/motion_sense.c:1274]: - - set_offset[driver/accelgyro_bmi160.c] - - set_offset[driver/accel_bma2x2.c] - host_cmd_motion_sense[common/motion_sense.c:1297]: - - perform_calib[driver/accelgyro_bmi160.c] - host_cmd_motion_sense[common/motion_sense.c:1300]: - - get_offset[driver/accelgyro_bmi160.c] - - get_offset[driver/accel_bma2x2.c] - command_accelrange[common/motion_sense.c:1515]: - - set_range[driver/accelgyro_bmi160.c] - - set_range[driver/accel_bma2x2.c] - command_accelrange[common/motion_sense.c:1520]: - - get_range[driver/accelgyro_bmi160.c] - - get_range[driver/accel_bma2x2.c] - host_cmd_motion_sense[common/motion_sense.c:1520]: - - get_range[driver/accelgyro_bmi160.c] - - get_range[driver/accel_bma2x2.c] - command_accelresolution[common/motion_sense.c:1564]: - - None - command_accelresolution[common/motion_sense.c:1568]: - - get_resolution[driver/accelgyro_bmi160.c] - - get_resolution[driver/accel_bma2x2.c] - command_accel_data_rate[common/motion_sense.c:1623]: - - get_data_rate[driver/accelgyro_bmi160.c] - - get_data_rate[driver/accel_bma2x2.c] - command_accel_read_xyz[common/motion_sense.c:1659]: - - read[driver/accelgyro_bmi160.c] - - read[driver/accel_bma2x2.c] - calculate_lid_angle[common/motion_lid.c:255]: - - get_range[driver/accelgyro_bmi160.c] - - get_range[driver/accel_bma2x2.c] - calculate_lid_angle[common/motion_lid.c:256]: - - get_range[driver/accelgyro_bmi160.c] - - get_range[driver/accel_bma2x2.c] - # Temp (see temp_sensors array in board file) - temp_sensor_read[common/temp_sensor.c:26]: - - charge_get_battery_temp - - bd99992gw_get_val - # Misc - jump_to_image[common/system.c:568]: - - None - system_download_from_flash[chip/npcx/system-npcx5.c:257]: - - None - __hibernate_npcx_series[chip/npcx/system-npcx5.c:144]: - - None - handle_command[common/console.c:248]: - - { name: __cmds, stride: 16, offset: 4 } - hook_task[common/hooks.c:197]: - - { name: __deferred_funcs, stride: 4, offset: 0 } - - { name: __hooks_second, stride: 8, offset: 0 } - - { name: __hooks_tick, stride: 8, offset: 0 } - # Note: This assumes worse case, where all hook functions can be called from - # any hook_notify call - # Generate using `grep hooks_.*_end build/nautilus/R*/ec.R*.smap | - # sed -e 's/.*\(__hooks.*\)_end/ - { name: \1, stride: 8, offset: 0 }/' | - # sort -u` - hook_notify[common/hooks.c:127]: - - { name: __hooks_ac_change, stride: 8, offset: 0 } - - { name: __hooks_battery_soc_change, stride: 8, offset: 0 } - - { name: __hooks_chipset_pre_init, stride: 8, offset: 0 } - - { name: __hooks_chipset_reset, stride: 8, offset: 0 } - - { name: __hooks_chipset_resume, stride: 8, offset: 0 } - - { name: __hooks_chipset_shutdown, stride: 8, offset: 0 } - - { name: __hooks_chipset_startup, stride: 8, offset: 0 } - - { name: __hooks_chipset_suspend, stride: 8, offset: 0 } - - { name: __hooks_freq_change, stride: 8, offset: 0 } - - { name: __hooks_lid_change, stride: 8, offset: 0 } - - { name: __hooks_pre_freq_change, stride: 8, offset: 0 } - - { name: __hooks_pwrbtn_change, stride: 8, offset: 0 } - - { name: __hooks_sysjump, stride: 8, offset: 0 } - - { name: __hooks_tablet_mode_change, stride: 8, offset: 0 } - mkbp_get_next_event[common/mkbp_event.c:130]: - - { name: __mkbp_evt_srcs, stride: 8, offset: 4 } - host_send_response[common/host_command.c:153]: - - lpc_send_response - host_packet_respond[common/host_command.c:240]: - - lpc_send_response - host_command_process[common/host_command.c:704]: - - { name: __hcmds, stride: 12, offset: 0 } - # gpio_interrupt.lto_priv.407[chip/npcx/gpio.c:479] - vfnprintf: - # This covers all the addchar in vfnprintf, but stackanalyzer does not - # realize that... - - __tx_char - i2c_command_passthru[common/i2c_master.c:597]: - - None -remove: -# Remove all callsites pointing to panic_assert_fail. -- panic_assert_fail -# Remove hook paths that don't make sense -- [ [ common_intel_x86_power_handle_state, power_button_change_deferred, hook_task, lpc_chipset_reset, espi_chipset_reset ], hook_notify, powerbtn_x86_lid_change ] -- [ system_common_shutdown, hook_notify, system_run_image_copy ] -- [ jump_to_image, hook_notify, [ powerbtn_x86_lid_change, system_common_shutdown, power_up_inhibited_cb, motion_sense_shutdown, motion_sense_resume ] ] -- [ [ extpower_deferred, charger_task, motion_sense_switch_sensor_rate, lid_switch_open, lid_switch_close, motion_sense_task ], hook_notify, [ powerbtn_x86_lid_change, power_up_inhibited_cb, system_common_shutdown, motion_sense_shutdown, motion_sense_resume ] ] -- [ common_intel_x86_power_handle_state, hook_notify, power_up_inhibited_cb ] -# pd_request_power_swap calls set_state with either PD_STATE_SRC_SWAP_INIT or -# PD_STATE_SNK_SWAP_INIT as parameters, which cannot call any of the -# charge_manager functions. -- [ [ pd_request_power_swap, pd_execute_hard_reset, pd_request_data_swap, pd_request_vconn_swap.lto_priv.237, pd_send_request_msg.lto_priv.250 ], set_state.lto_priv.236, [ typec_set_input_current_limit, charge_manager_update_charge, pd_power_supply_reset, pd_dfp_exit_mode, usb_mux_set ] ] -# Debug prints that do not actually need a 64 uint division, of the time -- [ [i2c_reset, i2c_abort_data, i2c_xfer], cprintf, vfnprintf, [uint64divmod.part.3.lto_priv.141, get_time] ] diff --git a/board/nautilus/battery.c b/board/nautilus/battery.c deleted file mode 100644 index 642497cdfe..0000000000 --- a/board/nautilus/battery.c +++ /dev/null @@ -1,224 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Placeholder values for temporary battery pack. - */ - -#include "battery.h" -#include "battery_smart.h" -#include "charge_state.h" -#include "console.h" -#include "ec_commands.h" -#include "extpower.h" -#include "gpio.h" -#include "util.h" - -static enum battery_present batt_pres_prev = BP_NOT_SURE; - -/* Shutdown mode parameters to write to manufacturer access register */ -#define SB_SHIP_MODE_REG SB_MANUFACTURER_ACCESS -#define SB_SHUTDOWN_DATA 0x0010 - -/* - * Unlike other smart batteries, Nautilus battery uses different bit fields - * in manufacturer access register for the conditions of the CHG/DSG FETs. - */ -#define BATFETS_SHIFT (14) -#define BATFETS_MASK (0x3) -#define BATFETS_DISABLED (0x2) - -#define CHARGING_VOLTAGE_MV_SAFE 8400 -#define CHARGING_CURRENT_MA_SAFE 1500 - -static const struct battery_info info = { - .voltage_max = 8700, - .voltage_normal = 7700, - .voltage_min = 6000, - /* Pre-charge values. */ - .precharge_current = 200, /* mA */ - - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 50, - .discharging_min_c = -20, - .discharging_max_c = 70, -}; - -const struct battery_info *battery_get_info(void) -{ - return &info; -} - -int board_cut_off_battery(void) -{ - int rv; - - /* Ship mode command must be sent twice to take effect */ - rv = sb_write(SB_SHIP_MODE_REG, SB_SHUTDOWN_DATA); - - if (rv != EC_SUCCESS) - return rv; - - return sb_write(SB_SHIP_MODE_REG, SB_SHUTDOWN_DATA); -} - -int charger_profile_override(struct charge_state_data *curr) -{ - int current; - int voltage; - /* battery temp in 0.1 deg C */ - int bat_temp_c; - - /* - * Keep track of battery temperature range: - * - * ZONE_0 ZONE_1 ZONE_2 ZONE_3 - * ---+------+--------+--------+------+--- Temperature (C) - * 0 5 12 45 50 - */ - enum { - TEMP_ZONE_0, /* 0 <= bat_temp_c <= 5 */ - TEMP_ZONE_1, /* 5 < bat_temp_c <= 12 */ - TEMP_ZONE_2, /* 12 < bat_temp_c <= 45 */ - TEMP_ZONE_3, /* 45 < bat_temp_c <= 50 */ - TEMP_ZONE_COUNT, - TEMP_OUT_OF_RANGE = TEMP_ZONE_COUNT - } temp_zone; - - current = curr->requested_current; - voltage = curr->requested_voltage; - bat_temp_c = curr->batt.temperature - 2731; - - /* - * If the temperature reading is bad, assume the temperature - * is out of allowable range. - */ - if ((curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE) || - (bat_temp_c < 0) || (bat_temp_c > 500)) - temp_zone = TEMP_OUT_OF_RANGE; - else if (bat_temp_c <= 50) - temp_zone = TEMP_ZONE_0; - else if (bat_temp_c <= 120) - temp_zone = TEMP_ZONE_1; - else if (bat_temp_c <= 450) - temp_zone = TEMP_ZONE_2; - else - temp_zone = TEMP_ZONE_3; - - switch (temp_zone) { - case TEMP_ZONE_0: - voltage = CHARGING_VOLTAGE_MV_SAFE; - current = CHARGING_CURRENT_MA_SAFE; - break; - case TEMP_ZONE_1: - current = CHARGING_CURRENT_MA_SAFE; - break; - case TEMP_ZONE_2: - break; - case TEMP_ZONE_3: - voltage = CHARGING_VOLTAGE_MV_SAFE; - break; - case TEMP_OUT_OF_RANGE: - /* Don't charge if outside of allowable temperature range */ - current = 0; - voltage = 0; - curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE; - curr->state = ST_IDLE; - break; - } - - curr->requested_voltage = MIN(curr->requested_voltage, voltage); - curr->requested_current = MIN(curr->requested_current, current); - - return 0; -} - -/* Customs options controllable by host command. */ -#define PARAM_FASTCHARGE (CS_PARAM_CUSTOM_PROFILE_MIN + 0) - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} - -enum battery_present battery_hw_present(void) -{ - /* The GPIO is low when the battery is physically present */ - return gpio_get_level(GPIO_BATTERY_PRESENT_L) ? BP_NO : BP_YES; -} - -static int battery_init(void) -{ - int batt_status; - - return battery_status(&batt_status) ? 0 : - !!(batt_status & STATUS_INITIALIZED); -} - -/* - * Check for case where both XCHG and XDSG bits are set indicating that even - * though the FG can be read from the battery, the battery is not able to be - * charged or discharged. This situation might happen when power is reconnected - * to a battery pack in sleep mode. In this transient siuation, the FG can be - * read, but the battery is still not able to provide power to the system. The - * calling function returns batt_pres = BP_NO, which instructs the charging - * state machine to prevent powering up the AP on battery alone which could lead - * to a brownout event when the battery isn't able yet to provide power to the - * system. - */ -static int battery_check_disconnect(void) -{ - int rv; - int batt_mfgacc; - - /* Check if battery charging + discharging is disabled. */ - rv = sb_read(SB_MANUFACTURER_ACCESS, &batt_mfgacc); - if (rv) - return BATTERY_DISCONNECT_ERROR; - - if (((batt_mfgacc >> BATFETS_SHIFT) & BATFETS_MASK) == - BATFETS_DISABLED) - return BATTERY_DISCONNECTED; - - return BATTERY_NOT_DISCONNECTED; -} - -enum battery_present battery_is_present(void) -{ - enum battery_present batt_pres; - - /* Get the physical hardware status */ - batt_pres = battery_hw_present(); - - /* - * Make sure battery status is implemented, I2C transactions are - * successful & the battery status is initialized to find out if it - * is a working battery and it is not in the cut-off mode. - * - * If battery I2C fails but VBATT is high, battery is booting from - * cut-off mode. - * - * FETs are turned off after Power Shutdown time. - * The device will wake up when a voltage is applied to PACK. - * Battery status will be inactive until it is initialized. - */ - if (batt_pres == BP_YES && batt_pres_prev != batt_pres && - (battery_is_cut_off() != BATTERY_CUTOFF_STATE_NORMAL || - battery_check_disconnect() != BATTERY_NOT_DISCONNECTED || - battery_init() == 0)) { - batt_pres = BP_NO; - } - - batt_pres_prev = batt_pres; - return batt_pres; -} - diff --git a/board/nautilus/board.c b/board/nautilus/board.c deleted file mode 100644 index bcdaf568e7..0000000000 --- a/board/nautilus/board.c +++ /dev/null @@ -1,781 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Poppy board-specific configuration */ - -#include "adc.h" -#include "bd99992gw.h" -#include "board_config.h" -#include "battery_smart.h" -#include "button.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "charge_ramp.h" -#include "charger.h" -#include "chipset.h" -#include "console.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/accel_bma2x2.h" -#include "driver/baro_bmp280.h" -#include "driver/charger/isl923x.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tcpm.h" -#include "driver/temp_sensor/bd99992gw.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "math_util.h" -#include "motion_lid.h" -#include "motion_sense.h" -#include "pi3usb9281.h" -#include "power.h" -#include "power_button.h" -#include "spi.h" -#include "switch.h" -#include "system.h" -#include "tablet_mode.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" -#include "usb_charge.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" -#include "util.h" -#include "espi.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -static void tcpc_alert_event(enum gpio_signal signal) -{ - if ((signal == GPIO_USB_C0_PD_INT_ODL) && - !gpio_get_level(GPIO_USB_C0_PD_RST_L)) - return; - else if ((signal == GPIO_USB_C1_PD_INT_ODL) && - !gpio_get_level(GPIO_USB_C1_PD_RST_L)) - return; - -#ifdef HAS_TASK_PDCMD - /* Exchange status with TCPCs */ - host_command_pd_send_status(PD_CHARGE_NO_CHANGE); -#endif -} - -/* Set PD discharge whenever VBUS detection is high (i.e. below threshold). */ -static void vbus_discharge_handler(void) -{ - if (system_get_board_version() >= 2) { - pd_set_vbus_discharge(0, - gpio_get_level(GPIO_USB_C0_VBUS_WAKE_L)); - pd_set_vbus_discharge(1, - gpio_get_level(GPIO_USB_C1_VBUS_WAKE_L)); - } -} -DECLARE_DEFERRED(vbus_discharge_handler); - -void vbus0_evt(enum gpio_signal signal) -{ - /* VBUS present GPIO is inverted */ - usb_charger_vbus_change(0, !gpio_get_level(signal)); - task_wake(TASK_ID_PD_C0); - - hook_call_deferred(&vbus_discharge_handler_data, 0); -} - -void vbus1_evt(enum gpio_signal signal) -{ - /* VBUS present GPIO is inverted */ - usb_charger_vbus_change(1, !gpio_get_level(signal)); - task_wake(TASK_ID_PD_C1); - - hook_call_deferred(&vbus_discharge_handler_data, 0); -} - -void usb0_evt(enum gpio_signal signal) -{ - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); -} - -void usb1_evt(enum gpio_signal signal) -{ - task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12); -} - -#include "gpio_list.h" - -/* Hibernate wake configuration */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* ADC channels */ -const struct adc_t adc_channels[] = { - /* Base detection */ - [ADC_BASE_DET] = {"BASE_DET", NPCX_ADC_CH0, - ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - /* Vbus sensing (10x voltage divider). */ - [ADC_VBUS] = {"VBUS", NPCX_ADC_CH2, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0}, - /* - * Adapter current output or battery charging/discharging current (uV) - * 18x amplification on charger side. - */ - [ADC_AMON_BMON] = {"AMON_BMON", NPCX_ADC_CH1, ADC_MAX_VOLT*1000/18, - ADC_READ_MAX+1, 0}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* I2C port map */ -const struct i2c_port_t i2c_ports[] = { - {"tcpc0", NPCX_I2C_PORT0_0, 400, GPIO_I2C0_0_SCL, GPIO_I2C0_0_SDA}, - {"tcpc1", NPCX_I2C_PORT0_1, 400, GPIO_I2C0_1_SCL, GPIO_I2C0_1_SDA}, - {"charger", NPCX_I2C_PORT1, 100, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"pmic", NPCX_I2C_PORT2, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, - {"accelgyro", NPCX_I2C_PORT3, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/* TCPC mux configuration */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = NPCX_I2C_PORT0_0, - .addr_flags = PS8751_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - }, - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = NPCX_I2C_PORT0_1, - .addr_flags = PS8751_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - }, -}; - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - }, - { - .usb_port = 1, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - } -}; - -struct pi3usb9281_config pi3usb9281_chips[] = { - { - .i2c_port = I2C_PORT_USB_CHARGER_0, - .mux_lock = NULL, - }, - { - .i2c_port = I2C_PORT_USB_CHARGER_1, - .mux_lock = NULL, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pi3usb9281_chips) == - CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT); - -const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = { - GPIO_USB1_ENABLE, -}; - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -void board_reset_pd_mcu(void) -{ - /* Assert reset */ - gpio_set_level(GPIO_USB_C0_PD_RST_L, 0); - gpio_set_level(GPIO_USB_C1_PD_RST_L, 0); - msleep(1); - gpio_set_level(GPIO_USB_C0_PD_RST_L, 1); - gpio_set_level(GPIO_USB_C1_PD_RST_L, 1); -} - -void board_tcpc_init(void) -{ - /* Only reset TCPC if not sysjump */ - if (!system_jumped_late()) { - board_reset_pd_mcu(); - } - - /* Enable TCPC interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL); - - /* - * Initialize HPD to low; after sysjump SOC needs to see - * HPD pulse to enable video path - */ - for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port) - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C+1); - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C0_PD_RST_L)) - status |= PD_STATUS_TCPC_ALERT_0; - } - - if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C1_PD_RST_L)) - status |= PD_STATUS_TCPC_ALERT_1; - } - - return status; -} - -const struct temp_sensor_t temp_sensors[] = { - {"Battery", TEMP_SENSOR_TYPE_BATTERY, charge_get_battery_temp, 0}, - - /* These BD99992GW temp sensors are only readable in S0 */ - {"Charger", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val, - BD99992GW_ADC_CHANNEL_SYSTHERM1}, - {"DRAM", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val, - BD99992GW_ADC_CHANNEL_SYSTHERM2}, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -/* - * Check if PMIC fault registers indicate VR fault. If yes, print out fault - * register info to console. Additionally, set panic reason so that the OS can - * check for fault register info by looking at offset 0x14(PWRSTAT1) and - * 0x15(PWRSTAT2) in cros ec panicinfo. - */ -static void board_report_pmic_fault(const char *str) -{ - int vrfault, pwrstat1 = 0, pwrstat2 = 0; - uint32_t info; - - /* RESETIRQ1 -- Bit 4: VRFAULT */ - if (i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, &vrfault) - != EC_SUCCESS) - return; - - if (!(vrfault & BIT(4))) - return; - - /* VRFAULT has occurred, print VRFAULT status bits. */ - - /* PWRSTAT1 */ - i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, &pwrstat1); - - /* PWRSTAT2 */ - i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, &pwrstat2); - - CPRINTS("PMIC VRFAULT: %s", str); - CPRINTS("PMIC VRFAULT: PWRSTAT1=0x%02x PWRSTAT2=0x%02x", pwrstat1, - pwrstat2); - - /* Clear all faults -- Write 1 to clear. */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, BIT(4)); - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, pwrstat1); - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, pwrstat2); - - /* - * Status of the fault registers can be checked in the OS by looking at - * offset 0x14(PWRSTAT1) and 0x15(PWRSTAT2) in cros ec panicinfo. - */ - info = ((pwrstat2 & 0xFF) << 8) | (pwrstat1 & 0xFF); - panic_set_reason(PANIC_SW_PMIC_FAULT, info, 0); -} - -static void board_pmic_disable_slp_s0_vr_decay(void) -{ - /* - * VCCIOCNT: - * Bit 6 (0) - Disable decay of VCCIO on SLP_S0# assertion - * Bits 5:4 (11) - Nominal output voltage: 0.850V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x30, 0x3a); - - /* - * V18ACNT: - * Bits 7:6 (00) - Disable low power mode on SLP_S0# assertion - * Bits 5:4 (10) - Nominal voltage set to 1.8V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x34, 0x2a); - - /* - * V100ACNT: - * Bits 7:6 (00) - Disable low power mode on SLP_S0# assertion - * Bits 5:4 (01) - Nominal voltage 1.0V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x37, 0x1a); - - /* - * V085ACNT: - * Bits 7:6 (00) - Disable low power mode on SLP_S0# assertion - * Bits 5:4 (11) - Nominal voltage 1.0V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x38, 0x3a); -} - -static void board_pmic_enable_slp_s0_vr_decay(void) -{ - /* - * VCCIOCNT: - * Bit 6 (1) - Enable decay of VCCIO on SLP_S0# assertion - * Bits 5:4 (11) - Nominal output voltage: 0.850V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x30, 0x7a); - - /* - * V18ACNT: - * Bits 7:6 (01) - Enable low power mode on SLP_S0# assertion - * Bits 5:4 (10) - Nominal voltage set to 1.8V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x34, 0x6a); - - /* - * V100ACNT: - * Bits 7:6 (01) - Enable low power mode on SLP_S0# assertion - * Bits 5:4 (01) - Nominal voltage 1.0V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x37, 0x5a); - - /* - * V085ACNT: - * Bits 7:6 (01) - Enable low power mode on SLP_S0# assertion - * Bits 5:4 (11) - Nominal voltage 1.0V - * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion - * Bits 1:0 (10) - VR set to AUTO operating mode - */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x38, 0x7a); -} - -__override void power_board_handle_host_sleep_event( - enum host_sleep_event state) -{ - if (state == HOST_SLEEP_EVENT_S0IX_SUSPEND) - board_pmic_enable_slp_s0_vr_decay(); - else if (state == HOST_SLEEP_EVENT_S0IX_RESUME) - board_pmic_disable_slp_s0_vr_decay(); -} - -static void board_pmic_init(void) -{ - board_report_pmic_fault("SYSJUMP"); - - if (system_jumped_late()) - return; - - /* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3e, 0x04); - - board_pmic_disable_slp_s0_vr_decay(); - - /* VRMODECTRL - disable low-power mode for all rails */ - i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3b, 0x1f); -} -DECLARE_DEFERRED(board_pmic_init); - -/* Initialize board. */ -static void board_init(void) -{ - /* - * This enables pull-down on F_DIO1 (SPI MISO), and F_DIO0 (SPI MOSI), - * whenever the EC is not doing SPI flash transactions. This avoids - * floating SPI buffer input (MISO), which causes power leakage (see - * b/64797021). - */ - NPCX_PUPD_EN1 |= BIT(NPCX_DEVPU1_F_SPI_PUD_EN); - - /* Provide AC status to the PCH */ - gpio_set_level(GPIO_PCH_ACOK, extpower_is_present()); - - /* Enable VBUS interrupt */ - gpio_enable_interrupt(GPIO_USB_C0_VBUS_WAKE_L); - gpio_enable_interrupt(GPIO_USB_C1_VBUS_WAKE_L); - - /* Enable pericom BC1.2 interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_L); - gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_L); - - /* Level of sensor's I2C and interrupt are 3.3V on proto board */ - if(system_get_board_version() < 2) { - /* ACCELGYRO3_INT_L */ - gpio_set_flags(GPIO_ACCELGYRO3_INT_L, GPIO_INT_FALLING); - /* I2C3_SCL / I2C3_SDA */ - gpio_set_flags(GPIO_I2C3_SCL, GPIO_INPUT); - gpio_set_flags(GPIO_I2C3_SDA, GPIO_INPUT); - } - - /* Enable Gyro interrupts */ - gpio_enable_interrupt(GPIO_ACCELGYRO3_INT_L); - - /* Initialize PMIC */ - hook_call_deferred(&board_pmic_init_data, 0); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -/** - * Buffer the AC present GPIO to the PCH. - */ -static void board_extpower(void) -{ - gpio_set_level(GPIO_PCH_ACOK, extpower_is_present()); -} -DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT); - -/** - * Set active charge port -- only one port can be active at a time. - * - * @param charge_port Charge port to enable. - * - * Returns EC_SUCCESS if charge port is accepted and made active, - * EC_ERROR_* otherwise. - */ -int board_set_active_charge_port(int charge_port) -{ - /* charge port is a physical port */ - int is_real_port = (charge_port >= 0 && - charge_port < CONFIG_USB_PD_PORT_MAX_COUNT); - /* check if we are source VBUS on the port */ - int source = gpio_get_level(charge_port == 0 ? GPIO_USB_C0_5V_EN : - GPIO_USB_C1_5V_EN); - - if (is_real_port && source) { - CPRINTF("Skip enable p%d", charge_port); - return EC_ERROR_INVAL; - } - - CPRINTF("New chg p%d", charge_port); - - if (charge_port == CHARGE_PORT_NONE) { - /* Disable both ports */ - gpio_set_level(GPIO_USB_C0_CHARGE_L, 1); - gpio_set_level(GPIO_USB_C1_CHARGE_L, 1); - } else { - /* Make sure non-charging port is disabled */ - gpio_set_level(charge_port ? GPIO_USB_C0_CHARGE_L : - GPIO_USB_C1_CHARGE_L, 1); - /* Enable charging port */ - gpio_set_level(charge_port ? GPIO_USB_C1_CHARGE_L : - GPIO_USB_C0_CHARGE_L, 0); - } - - return EC_SUCCESS; -} - -/** - * Set the charge limit based upon desired maximum. - * - * @param port Port number. - * @param supplier Charge supplier type. - * @param charge_ma Desired charge limit (mA). - * @param charge_mv Negotiated charge voltage (mV). - */ -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - /* - * Limit the input current to 96% negotiated limit, - * to account for the charger chip margin. - */ - charge_ma = charge_ma * 96 / 100; - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), charge_mv); -} - -/** - * Return the maximum allowed input current - */ -int board_get_ramp_current_limit(int supplier, int sup_curr) -{ - switch (supplier) { - case CHARGE_SUPPLIER_BC12_DCP: - return 2000; - case CHARGE_SUPPLIER_BC12_SDP: - return 1000; - case CHARGE_SUPPLIER_BC12_CDP: - case CHARGE_SUPPLIER_PROPRIETARY: - return sup_curr; - default: - return 500; - } -} - -void board_hibernate(void) -{ - CPRINTS("Triggering PMIC shutdown."); - uart_flush_output(); - - /* Trigger PMIC shutdown. */ - if (i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x49, 0x01)) { - /* - * If we can't tell the PMIC to shutdown, instead reset - * and don't start the AP. Hopefully we'll be able to - * communicate with the PMIC next time. - */ - CPRINTS("PMIC i2c failed."); - system_reset(SYSTEM_RESET_LEAVE_AP_OFF); - } - - /* Await shutdown. */ - while (1) - ; -} - -int board_get_version(void) -{ - static int ver = -1; - uint8_t id3; - - if (ver != -1) - return ver; - - ver = 0; - - /* First 2 strappings are binary. */ - if (gpio_get_level(GPIO_BOARD_VERSION1)) - ver |= 0x01; - if (gpio_get_level(GPIO_BOARD_VERSION2)) - ver |= 0x02; - - /* - * The 3rd strapping pin is tristate. - * id3 = 2 if Hi-Z, id3 = 1 if high, and id3 = 0 if low. - */ - id3 = gpio_get_ternary(GPIO_BOARD_VERSION3); - ver |= id3 * 0x04; - - CPRINTS("Board ID = %d", ver); - - return ver; -} - -/* Lid Sensor mutex */ -static struct mutex g_lid_mutex; -static struct mutex g_base_mutex; - -static struct bmi_drv_data_t g_bmi160_data; - -/* BMA255 private data */ -static struct accelgyro_saved_data_t g_bma255_data; - -/* Matrix to rotate accelrator into standard reference frame */ -const mat33_fp_t base_standard_ref = { - { FLOAT_TO_FP(-1), 0, 0 }, - { 0, FLOAT_TO_FP(1), 0 }, - { 0, 0, FLOAT_TO_FP(-1) } -}; - -const mat33_fp_t lid_standard_ref = { - { FLOAT_TO_FP(-1), 0, 0 }, - { 0, FLOAT_TO_FP(1), 0 }, - { 0, 0, FLOAT_TO_FP(-1) } -}; - -struct motion_sensor_t motion_sensors[] = { - [LID_ACCEL] = { - .name = "Lid Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMA255, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_LID, - .drv = &bma2x2_accel_drv, - .mutex = &g_lid_mutex, - .drv_data = &g_bma255_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS, - .rot_standard_ref = &lid_standard_ref, - .min_frequency = BMA255_ACCEL_MIN_FREQ, - .max_frequency = BMA255_ACCEL_MAX_FREQ, - .default_range = 2, /* g, to support lid angle calculation. */ - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - /* Sensor on in S3 */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, - }, - [BASE_ACCEL] = { - .name = "Base Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, - .rot_standard_ref = &base_standard_ref, - .min_frequency = BMI_ACCEL_MIN_FREQ, - .max_frequency = BMI_ACCEL_MAX_FREQ, - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */ - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - /* Sensor on in S3 */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, - }, - [BASE_GYRO] = { - .name = "Base Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, - .default_range = 1000, /* dps */ - .rot_standard_ref = &base_standard_ref, - .min_frequency = BMI_GYRO_MIN_FREQ, - .max_frequency = BMI_GYRO_MAX_FREQ, - }, -}; -const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); - -/* Enable or disable input devices, based on chipset state and tablet mode */ -__override void lid_angle_peripheral_enable(int enable) -{ - /* If the lid is in 360 position, ignore the lid angle, - * which might be faulty. Disable keyboard. - */ - if (tablet_get_mode() || chipset_in_state(CHIPSET_STATE_ANY_OFF)) - enable = 0; - keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); -} - -static void board_chipset_reset(void) -{ - board_report_pmic_fault("CHIPSET RESET"); -} -DECLARE_HOOK(HOOK_CHIPSET_RESET, board_chipset_reset, HOOK_PRIO_DEFAULT); - -/* Called on AP S3 -> S0 transition */ -static void board_chipset_resume(void) -{ - gpio_set_level(GPIO_ENABLE_BACKLIGHT, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); - -/* Called on AP S0 -> S3 transition */ -static void board_chipset_suspend(void) -{ - gpio_set_level(GPIO_ENABLE_BACKLIGHT, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); - -static void board_chipset_startup(void) -{ - /* Enable USB-A port. */ - gpio_set_level(GPIO_USB1_ENABLE, 1); - - gpio_set_level(GPIO_ENABLE_TOUCHPAD, 1); - - gpio_set_level(GPIO_PP1800_DX_SENSOR, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT); - -static void board_chipset_shutdown(void) -{ - /* Disable USB-A port. */ - gpio_set_level(GPIO_USB1_ENABLE, 0); - - gpio_set_level(GPIO_ENABLE_TOUCHPAD, 0); - - gpio_set_level(GPIO_PP1800_DX_SENSOR, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT); - -int board_has_working_reset_flags(void) -{ - int version = system_get_board_version(); - - /* Boards Rev1, Rev2 and Rev3 will lose reset flags on power cycle. */ - if ((version == 1) || (version == 2) || (version == 3)) - return 0; - - /* All other board versions should have working reset flags */ - return 1; -} - -/* - * I2C callbacks to ensure bus free time for battery I2C transactions is at - * least 5ms. - */ -#define BATTERY_FREE_MIN_DELTA_US (5 * MSEC) -static timestamp_t battery_last_i2c_time; - -static int is_battery_i2c(const int port, const uint16_t slave_addr_flags) -{ - return (port == I2C_PORT_BATTERY) - && (slave_addr_flags == BATTERY_ADDR_FLAGS); -} - -void i2c_start_xfer_notify(const int port, const uint16_t slave_addr_flags) -{ - unsigned int time_delta_us; - - if (!is_battery_i2c(port, slave_addr_flags)) - return; - - time_delta_us = time_since32(battery_last_i2c_time); - if (time_delta_us >= BATTERY_FREE_MIN_DELTA_US) - return; - - usleep(BATTERY_FREE_MIN_DELTA_US - time_delta_us); -} - -void i2c_end_xfer_notify(const int port, const uint16_t slave_addr_flags) -{ - if (!is_battery_i2c(port, slave_addr_flags)) - return; - - battery_last_i2c_time = get_time(); -} diff --git a/board/nautilus/board.h b/board/nautilus/board.h deleted file mode 100644 index 88389956b9..0000000000 --- a/board/nautilus/board.h +++ /dev/null @@ -1,247 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Eve board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * Allow dangerous commands. - * TODO: Remove this config before production. - */ -#define CONFIG_SYSTEM_UNLOCKED - -/* EC */ -#define CONFIG_ADC -#define CONFIG_BACKLIGHT_LID -#define CONFIG_BOARD_FORCE_RESET_PIN -#define CONFIG_CASE_CLOSED_DEBUG_EXTERNAL -#define CONFIG_DPTF -#define CONFIG_DPTF_MOTION_LID_NO_GMR_SENSOR -#define CONFIG_DPTF_MULTI_PROFILE -#define CONFIG_FLASH_SIZE_BYTES 0x80000 -#define CONFIG_FPU -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_XFER_BOARD_CALLBACK -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_LED_COMMON -#define CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LTO -#define CONFIG_CHIP_PANIC_BACKUP -#define CONFIG_SOFTWARE_PANIC -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25X40 -#define CONFIG_VBOOT_HASH -#define CONFIG_SHA256_UNROLLED -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 -#define CONFIG_WATCHDOG_HELP -#define CONFIG_WIRELESS -#define CONFIG_WIRELESS_SUSPEND \ - (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) -#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L -#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN - -/* EC console commands */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_CMD_BUTTON - -/* Port80 */ -#undef CONFIG_PORT80_HISTORY_LEN -#define CONFIG_PORT80_HISTORY_LEN 256 - -/* SOC */ -#define CONFIG_CHIPSET_SKYLAKE -#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" -#define CONFIG_BATTERY_SMART - -/* Charger */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGE_RAMP_HW /* This, or just RAMP? */ - -#define CONFIG_CHARGER -#define CONFIG_CHARGER_ISL9238 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* USB-A config */ -#define CONFIG_USB_PORT_POWER_SMART -#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY -#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT -#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1 -#define GPIO_USB1_ILIM_SEL GPIO_USB_A_ILIM_SEL - -/* Sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_BD99992GW -#define CONFIG_THERMISTOR_NCP15WB - -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_ACCELGYRO_BMI160 -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCELGYRO_BMI160_INT2_OUTPUT -#define CONFIG_ACCEL_BMA255 -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL -#define CONFIG_LID_ANGLE_UPDATE - -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is in power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 512 -/* Depends on how fast the AP boots and typical ODRs */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 2048 - -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH - -/* USB */ -#define CONFIG_USB_CHARGER -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_VBUS_DETECT_GPIO -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_PS8751 -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* BC 1.2 charger */ -#define CONFIG_BC12_DETECT_PI3USB9281 -#define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 - -/* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 as TACH */ - -/* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 -#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 -#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT1 -#define I2C_PORT_CHARGER NPCX_I2C_PORT1 -#define I2C_PORT_BATTERY NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_MP2949 NPCX_I2C_PORT2 -#define I2C_PORT_GYRO NPCX_I2C_PORT3 -#define I2C_PORT_BARO NPCX_I2C_PORT3 -#define I2C_PORT_ACCEL I2C_PORT_GYRO -#define I2C_PORT_THERMAL I2C_PORT_PMIC - -/* I2C addresses */ -#define I2C_ADDR_BD99992_FLAGS 0x30 -#define I2C_ADDR_MP2949_FLAGS 0x20 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -/* Nautilus doesn't have systherm0 and systherm3 */ -enum temp_sensor_id { - TEMP_SENSOR_BATTERY, /* BD99956GW TSENSE */ - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ - TEMP_SENSOR_COUNT -}; - -/* - * Motion sensors: - * When reading through IO memory is set up for sensors (LPC is used), - * the first 2 entries must be accelerometers, then gyroscope. - * For BMI160, accel, gyro and compass sensors must be next to each other. - */ - -enum sensor_id { - LID_ACCEL = 0, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT, -}; - -enum adc_channel { - ADC_BASE_DET, - ADC_VBUS, - ADC_AMON_BMON, - ADC_CH_COUNT -}; - -/* TODO(crosbug.com/p/61098): Verify the numbers below. */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Board specific handlers */ -int board_get_version(void); -void board_reset_pd_mcu(void); -void board_set_tcpc_power_mode(int port, int mode); - -/* Sensors without hardware FIFO are in forced mode */ -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ diff --git a/board/nautilus/build.mk b/board/nautilus/build.mk deleted file mode 100644 index f4bf21113d..0000000000 --- a/board/nautilus/build.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -*- makefile -*- -# Copyright 2017 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Board specific files build -# - -CHIP:=npcx -CHIP_VARIANT:=npcx5m6g - -board-y=board.o -board-$(CONFIG_BATTERY_SMART)+=battery.o -board-$(CONFIG_LED_COMMON)+=led.o -board-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/board/nautilus/ec.tasklist b/board/nautilus/ec.tasklist deleted file mode 100644 index 8257734572..0000000000 --- a/board/nautilus/ec.tasklist +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * See CONFIG_TASK_LIST in config.h for details. - */ - -#define CONFIG_TASK_LIST \ - TASK_ALWAYS(HOOKS, hook_task, NULL, 800) \ - TASK_ALWAYS(USB_CHG_P0, usb_charger_task, NULL, 720) \ - TASK_ALWAYS(USB_CHG_P1, usb_charger_task, NULL, 720) \ - TASK_ALWAYS(CHARGER, charger_task, NULL, 800) \ - TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, 768) \ - TASK_NOTEST(CHIPSET, chipset_task, NULL, 800) \ - TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, 600) \ - TASK_NOTEST(PDCMD, pd_command_task, NULL, 800) \ - TASK_ALWAYS(HOSTCMD, host_command_task, NULL, 840) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, 880) \ - TASK_ALWAYS(POWERBTN, power_button_task, NULL, 800) \ - TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, 600) \ - TASK_ALWAYS(PD_C0, pd_task, NULL, 1000) \ - TASK_ALWAYS(PD_C1, pd_task, NULL, 1000) diff --git a/board/nautilus/gpio.inc b/board/nautilus/gpio.inc deleted file mode 100644 index 9cfc1e0bfd..0000000000 --- a/board/nautilus/gpio.inc +++ /dev/null @@ -1,125 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(USB_C0_PD_INT_ODL, PIN(3, 7), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_PD_INT_ODL, PIN(C, 5), GPIO_INT_FALLING, tcpc_alert_event) -#ifdef CONFIG_POWER_S0IX -GPIO_INT(PCH_SLP_S0_L, PIN(7, 5), GPIO_INT_BOTH, power_signal_interrupt) -#endif -/* Use VW signals instead of GPIOs */ -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -GPIO_INT(PCH_SLP_S3_L, PIN(7, 3), GPIO_INT_BOTH, power_signal_interrupt) -#endif -#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -GPIO_INT(PCH_SLP_S4_L, PIN(8, 6), GPIO_INT_BOTH, power_signal_interrupt) -#endif -GPIO_INT(PCH_SLP_SUS_L, PIN(6, 2), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(RSMRST_L_PGOOD, PIN(B, 0), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PMIC_DPWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(POWER_BUTTON_L, PIN(0, 4), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(6, 7), GPIO_INT_BOTH, lid_interrupt) -GPIO_INT(VOLUME_DOWN_L, PIN(8, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(VOLUME_UP_L, PIN(8, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(WP_L, PIN(4, 0), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(AC_PRESENT, PIN(C, 1), GPIO_INT_BOTH, extpower_interrupt) -GPIO_INT(USB_C0_VBUS_WAKE_L, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, vbus0_evt) -GPIO_INT(USB_C1_VBUS_WAKE_L, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, vbus1_evt) -GPIO_INT(USB_C0_BC12_INT_L, PIN(D, 3), GPIO_INT_FALLING, usb0_evt) -GPIO_INT(USB_C1_BC12_INT_L, PIN(3, 3), GPIO_INT_FALLING, usb1_evt) -GPIO_INT(ACCELGYRO3_INT_L, PIN(3, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt) - -GPIO(ENABLE_TOUCHPAD, PIN(4, 5), GPIO_OUT_LOW) -GPIO(PCH_RTCRST, PIN(2, 7), GPIO_OUT_LOW) /* RTCRST# to SOC (>= rev4) */ -GPIO(ENABLE_BACKLIGHT, PIN(5, 6), GPIO_OUT_LOW) /* Enable Backlight */ -GPIO(WLAN_OFF_L, PIN(7, 2), GPIO_OUT_LOW) /* Disable WLAN */ -GPIO(PP3300_DX_WLAN, PIN(A, 7), GPIO_OUT_LOW) /* Enable WLAN 3.3V Power */ -GPIO(CPU_PROCHOT, PIN(8, 1), GPIO_OUT_HIGH) /* PROCHOT# to SOC */ -GPIO(PCH_ACOK, PIN(5, 0), GPIO_ODR_LOW) /* ACOK to SOC */ -GPIO(PCH_WAKE_L, PIN(A, 3), GPIO_ODR_HIGH) /* Wake SOC */ -GPIO(PCH_RSMRST_L, PIN(7, 0), GPIO_OUT_LOW) /* RSMRST# to SOC */ -GPIO(PCH_PWRBTN_L, PIN(4, 1), GPIO_ODR_HIGH) /* Power Button to SOC */ -GPIO(EC_PLATFORM_RST, PIN(A, 6), GPIO_OUT_LOW) /* EC Reset to LDO_EN */ -GPIO(SYS_RESET_L, PIN(6, 1), GPIO_ODR_HIGH) /* Cold Reset to SOC */ -GPIO(PMIC_SLP_SUS_L, PIN(8, 5), GPIO_OUT_LOW) /* SLP_SUS# to PMIC */ -GPIO(BATTERY_PRESENT_L, PIN(3, 4), GPIO_INPUT) /* Battery Present */ -GPIO(CCD_MODE_ODL, PIN(6, 3), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(ENTERING_RW, PIN(7, 6), GPIO_OUTPUT) /* EC Entering RW */ -GPIO(PMIC_INT_L, PIN(6, 0), GPIO_INPUT) /* PMIC interrupt */ -#ifndef CONFIG_POWER_S0IX -GPIO(PCH_SLP_S0_L, PIN(7, 5), GPIO_INPUT) -#endif - -/* NC pins */ -GPIO(GPIO02_NC, PIN(0, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO32_NC, PIN(3, 2), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO71_NC, PIN(7, 1), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIO80_NC, PIN(8, 0), GPIO_INPUT | GPIO_PULL_UP) -GPIO(GPIOD2_NC, PIN(D, 2), GPIO_INPUT | GPIO_PULL_UP) - -/* Sensor Power */ -GPIO(PP1800_DX_SENSOR, PIN(E, 7), GPIO_OUT_LOW) - -/* I2C pins - these will be reconfigured for alternate function below */ -GPIO(I2C0_0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C0_0_USBC_3V3_SCL */ -GPIO(I2C0_0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C0_0_USBC_3V3_SDA */ -GPIO(I2C0_1_SCL, PIN(B, 3), GPIO_INPUT) /* EC_I2C0_1_USBC_3V3_SCL */ -GPIO(I2C0_1_SDA, PIN(B, 2), GPIO_INPUT) /* EC_I2C0_1_USBC_3V3_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C1_3V3_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C1_3V3_SDA */ -GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C2_PMIC_3V3_SCL */ -GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C2_PMIC_3V3_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C3_SENSOR_1V8_SCL */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C3_SENSOR_1V8_SDA */ - -/* rev0: 5V enables: INPUT=1.5A, OUT_LOW=OFF, OUT_HIGH=3A */ -GPIO(USB_C0_5V_EN, PIN(4, 2), GPIO_OUT_LOW) /* C0 5V Enable */ -GPIO(USB_C0_3A_EN, PIN(6, 6), GPIO_OUT_LOW) /* C0 Enable 3A */ -GPIO(USB_C0_CHARGE_L, PIN(C, 0), GPIO_OUT_LOW) /* C0 Charge enable */ -GPIO(USB_C1_5V_EN, PIN(B, 1), GPIO_OUT_LOW) /* C1 5V Enable */ -GPIO(USB_C1_3A_EN, PIN(3, 5), GPIO_OUT_LOW) /* C1 3A Enable */ -GPIO(USB_C1_CHARGE_L, PIN(C, 3), GPIO_OUT_LOW) /* C1 Charge enable */ -GPIO(USB_C0_PD_RST_L, PIN(0, 3), GPIO_ODR_HIGH) /* C0 PD Reset */ -GPIO(USB_C1_PD_RST_L, PIN(7, 4), GPIO_ODR_HIGH) /* C1 PD Reset */ -GPIO(USB_C0_DP_HPD, PIN(9, 4), GPIO_INPUT) /* C0 DP Hotplug Detect */ -GPIO(USB_C1_DP_HPD, PIN(A, 5), GPIO_INPUT) /* C1 DP Hotplug Detect */ -GPIO(USB_C0_TCPC_PWR, PIN(8, 4), GPIO_OUT_LOW) /* Enable C0 TCPC Power */ -GPIO(USB2_OTG_ID, PIN(A, 1), GPIO_ODR_LOW) /* OTG ID */ -GPIO(USB2_OTG_VBUSSENSE, PIN(9, 5), GPIO_OUT_LOW) /* OTG VBUS Sense */ - -/* USB Type-A control */ -GPIO(USB_A_ILIM_SEL, PIN(0, 0), GPIO_OUT_LOW) -GPIO(USB1_ENABLE, PIN(0, 1), GPIO_OUT_LOW) - -/* LEDs (2 colors on each port) */ -GPIO(LED_ACIN, PIN(B, 6), GPIO_OUT_HIGH) /* ACIN LED */ -GPIO(POWER_LED, PIN(B, 7), GPIO_OUT_HIGH) /* Power LED */ -GPIO(LED_CHARGE, PIN(C, 6), GPIO_OUT_HIGH) /* Charge LED */ - -/* Board ID */ -GPIO(BOARD_VERSION1, PIN(8, 6), GPIO_INPUT) /* Board ID bit0 */ -GPIO(BOARD_VERSION2, PIN(C, 2), GPIO_INPUT) /* Board ID bit1 */ -GPIO(BOARD_VERSION3, PIN(C, 4), GPIO_INPUT) /* Board ID bit2 */ - -/* Alternate functions GPIO definitions */ -ALTERNATE(PIN_MASK(6, 0x30), 1, MODULE_UART, 0) /* GPIO64-65 */ /* UART from EC to Servo */ -ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0) /* GPIO87 */ /* EC_I2C1_3V3_SDA */ -ALTERNATE(PIN_MASK(9, 0x01), 1, MODULE_I2C, 0) /* GPIO90 */ /* EC_I2C1_3V3_SCL */ -ALTERNATE(PIN_MASK(9, 0x06), 1, MODULE_I2C, 0) /* GPIO91-92 */ /* EC_I2C2_PMIC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0) /* GPIOB4-B5 */ /* EC_I2C0_0_USBC_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, 0) /* GPOPB2-B3 */ /* EC_I2C0_1_3V3_SDA/SCL */ -ALTERNATE(PIN_MASK(D, 0x03), 1, MODULE_I2C, 0) /* GPIOD0-D1 */ /* EC_I2C3_SENSOR_1V8_SDA/SCL */ - -/* Keyboard pins */ -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, 0) -ALTERNATE(PIN_MASK(2, 0xfc), 0, MODULE_KEYBOARD_SCAN, 0) -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, 0) -ALTERNATE(PIN_MASK(0, 0xe0), 0, MODULE_KEYBOARD_SCAN, 0) -ALTERNATE(PIN_MASK(1, 0x7f), 0, MODULE_KEYBOARD_SCAN, 0) -GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) diff --git a/board/nautilus/led.c b/board/nautilus/led.c deleted file mode 100644 index 86567701f0..0000000000 --- a/board/nautilus/led.c +++ /dev/null @@ -1,136 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED control. - */ - -#include "battery.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "chipset.h" -#include "ec_commands.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "led_common.h" -#include "system.h" -#include "util.h" - -#define BAT_LED_ON 1 -#define BAT_LED_OFF 0 - -#define LED_TOTAL_TICKS 16 -#define LED_ON_TICKS 8 - -const enum ec_led_id supported_led_ids[] = { - EC_LED_ID_POWER_LED, - EC_LED_ID_BATTERY_LED}; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -enum led_color { - LED_OFF = 0, - LED_RED, - LED_GREEN, - LED_BLUE, - - /* Number of colors, not a color itself */ - LED_COLOR_COUNT -}; - -/** - * Set LED color - * - * @param color Enumerated color value - */ -static void set_color(enum led_color color) -{ - gpio_set_level(GPIO_POWER_LED, !(color == LED_BLUE)); - gpio_set_level(GPIO_LED_ACIN, !(color == LED_GREEN)); - gpio_set_level(GPIO_LED_CHARGE, !(color == LED_RED)); -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - brightness_range[EC_LED_COLOR_RED] = 1; - brightness_range[EC_LED_COLOR_BLUE] = 1; - brightness_range[EC_LED_COLOR_GREEN] = 1; -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - gpio_set_level(GPIO_POWER_LED, !brightness[EC_LED_COLOR_BLUE]); - gpio_set_level(GPIO_LED_ACIN, !brightness[EC_LED_COLOR_GREEN]); - gpio_set_level(GPIO_LED_CHARGE, !brightness[EC_LED_COLOR_RED]); - - return EC_SUCCESS; -} - - -static void nautilus_led_set_power_battery(void) -{ - static unsigned int power_ticks; - enum led_color cur_led_color = LED_RED; - enum charge_state chg_state = charge_get_state(); - int charge_percent = charge_get_percent(); - - if (chipset_in_state(CHIPSET_STATE_ON)) { - set_color(LED_BLUE); - return; - } - - /* Flash red on critical battery, which usually inhibits AP power-on. */ - if (battery_is_present() != BP_YES || - charge_percent < CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON) { - set_color(((power_ticks++ % LED_TOTAL_TICKS) < LED_ON_TICKS) ? - LED_RED : LED_OFF); - return; - } - - /* CHIPSET_STATE_OFF */ - switch (chg_state) { - case PWR_STATE_DISCHARGE: - if ((charge_get_flags() & CHARGE_FLAG_EXTERNAL_POWER) && - charge_percent >= BATTERY_LEVEL_NEAR_FULL) - cur_led_color = LED_GREEN; - else - cur_led_color = LED_OFF; - break; - case PWR_STATE_CHARGE: - cur_led_color = LED_RED; - break; - case PWR_STATE_ERROR: - cur_led_color = ((power_ticks++ % LED_TOTAL_TICKS) - < LED_ON_TICKS) ? LED_RED : LED_GREEN; - break; - case PWR_STATE_CHARGE_NEAR_FULL: - case PWR_STATE_IDLE: - if(charge_get_flags() & CHARGE_FLAG_EXTERNAL_POWER) - cur_led_color = LED_GREEN; - else - cur_led_color = LED_OFF; - break; - default: - cur_led_color = LED_RED; - break; - } - - set_color(cur_led_color); - - if (chg_state != PWR_STATE_ERROR) - power_ticks = 0; -} - -/** - * Called by hook task every 250 ms - */ -static void led_tick(void) -{ - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED) && - led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) { - nautilus_led_set_power_battery(); - } -} - -DECLARE_HOOK(HOOK_TICK, led_tick, HOOK_PRIO_DEFAULT); diff --git a/board/nautilus/usb_pd_policy.c b/board/nautilus/usb_pd_policy.c deleted file mode 100644 index be4716b860..0000000000 --- a/board/nautilus/usb_pd_policy.c +++ /dev/null @@ -1,145 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "atomic.h" -#include "extpower.h" -#include "charge_manager.h" -#include "common.h" -#include "console.h" -#include "driver/tcpm/ps8xxx.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "registers.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "util.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -static uint8_t vbus_en[CONFIG_USB_PD_PORT_MAX_COUNT]; -static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = {TYPEC_RP_1A5, - TYPEC_RP_1A5}; - -int board_vbus_source_enabled(int port) -{ - return vbus_en[port]; -} - -static void board_vbus_update_source_current(int port) -{ - enum gpio_signal gpio_5v_en = port ? GPIO_USB_C1_5V_EN : - GPIO_USB_C0_5V_EN; - enum gpio_signal gpio_3a_en = port ? GPIO_USB_C1_3A_EN : - GPIO_USB_C0_3A_EN; - - if (system_get_board_version() >= 1) { - /* - * For rev1 and beyond, 1.5 vs 3.0 A limit is controlled by a - * dedicated gpio where high = 3.0A and low = 1.5A. VBUS on/off - * is controlled by GPIO_USB_C0/1_5V_EN. Both of these signals - * can remain outputs. - */ - gpio_set_level(gpio_3a_en, vbus_rp[port] == TYPEC_RP_3A0 ? - 1 : 0); - gpio_set_level(gpio_5v_en, vbus_en[port]); - } else { - /* - * Driving USB_Cx_5V_EN high, actually put a 16.5k resistance - * (2x 33k in parallel) on the NX5P3290 load switch ILIM pin, - * setting a minimum OCP current of 3186 mA. - * Putting an internal pull-up on USB_Cx_5V_EN, effectively put - * a 33k resistor on ILIM, setting a minimum OCP current of - * 1505 mA. - */ - int flags = (vbus_rp[port] == TYPEC_RP_1A5 && vbus_en[port]) ? - (GPIO_INPUT | GPIO_PULL_UP) : - (GPIO_OUTPUT | GPIO_PULL_UP); - gpio_set_level(gpio_5v_en, vbus_en[port]); - gpio_set_flags(gpio_5v_en, flags); - } -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - vbus_rp[port] = rp; - - /* change the GPIO driving the load switch if needed */ - board_vbus_update_source_current(port); -} - -int pd_set_power_supply_ready(int port) -{ - /* Disable charging */ - gpio_set_level(port ? GPIO_USB_C1_CHARGE_L : - GPIO_USB_C0_CHARGE_L, 1); - - /* Ensure we advertise the proper available current quota */ - charge_manager_source_port(port, 1); - - /* Provide VBUS */ - vbus_en[port] = 1; - board_vbus_update_source_current(port); - - if (system_get_board_version() >= 2) - pd_set_vbus_discharge(port, 0); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; /* we are ready */ -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = vbus_en[port]; - - /* Disable VBUS */ - vbus_en[port] = 0; - board_vbus_update_source_current(port); - - /* Enable discharge if we were previously sourcing 5V */ - if (system_get_board_version() >= 2 && prev_en) - pd_set_vbus_discharge(port, 1); - - /* Give back the current quota we are no longer using */ - charge_manager_source_port(port, 0); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_snk_is_vbus_provided(int port) -{ - return !gpio_get_level(port ? GPIO_USB_C1_VBUS_WAKE_L : - GPIO_USB_C0_VBUS_WAKE_L); -} - - -int pd_check_vconn_swap(int port) -{ - /* in G3, do not allow vconn swap since pp5000_A rail is off */ - return gpio_get_level(GPIO_PMIC_SLP_SUS_L); -} - -__override void pd_execute_data_swap(int port, - enum pd_data_role data_role) -{ - /* Only port 0 supports device mode. */ - if (port != 0) - return; - - gpio_set_level(GPIO_USB2_OTG_ID, - (data_role == PD_ROLE_UFP) ? 1 : 0); - gpio_set_level(GPIO_USB2_OTG_VBUSSENSE, - (data_role == PD_ROLE_UFP) ? 1 : 0); -} diff --git a/board/nautilus/vif_override.xml b/board/nautilus/vif_override.xml deleted file mode 100644 index 32736caf64..0000000000 --- a/board/nautilus/vif_override.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File - Definition from the USB-IF. ---> |