diff options
Diffstat (limited to 'board/nightfury/board.c')
| -rw-r--r-- | board/nightfury/board.c | 99 |
1 files changed, 46 insertions, 53 deletions
diff --git a/board/nightfury/board.c b/board/nightfury/board.c index faaea01042..bfcdd14628 100644 --- a/board/nightfury/board.c +++ b/board/nightfury/board.c @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -44,8 +44,8 @@ #include "usbc_ppc.h" #include "util.h" -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) static void ppc_interrupt(enum gpio_signal signal) { @@ -101,23 +101,16 @@ static void bc12_interrupt(enum gpio_signal signal) /******************************************************************************/ /* SPI devices */ -const struct spi_device_t spi_devices[] = { -}; +const struct spi_device_t spi_devices[] = {}; const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); /******************************************************************************/ /* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ const struct pwm_t pwm_channels[] = { - [PWM_CH_KBLIGHT] = { - .channel = 3, - .flags = 0, - .freq = 10000 - }, - [PWM_CH_FAN] = { - .channel = 5, - .flags = PWM_CONFIG_OPEN_DRAIN, - .freq = 25000 - }, + [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 }, + [PWM_CH_FAN] = { .channel = 5, + .flags = PWM_CONFIG_OPEN_DRAIN, + .freq = 25000 }, }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); @@ -142,14 +135,18 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { }, }; -struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { +struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { [USB_PD_PORT_TCPC_0] = { - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, + .mux = &(const struct usb_mux) { + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, }, [USB_PD_PORT_TCPC_1] = { - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, + .mux = &(const struct usb_mux) { + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, } }; @@ -186,22 +183,18 @@ static struct opt3001_drv_data_t g_opt3001_data = { static struct stprivate_data g_lis2ds_data; /* Matrix to rotate accelrator into standard reference frame */ -static const mat33_fp_t base_standard_ref = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(-1), 0, 0}, - { 0, 0, FLOAT_TO_FP(1)} -}; +static const mat33_fp_t base_standard_ref = { { 0, FLOAT_TO_FP(1), 0 }, + { FLOAT_TO_FP(-1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(1) } }; /* * TODO(b/124337208): P0 boards don't have this sensor mounted so the rotation * matrix can't be tested properly. This needs to be revisited after EVT to make * sure the rotation matrix for the lid sensor is correct. */ -static const mat33_fp_t lid_standard_ref = { - { 0, FLOAT_TO_FP(-1), 0}, - { FLOAT_TO_FP(-1), 0, 0}, - { 0, 0, FLOAT_TO_FP(1)} -}; +static const mat33_fp_t lid_standard_ref = { { 0, FLOAT_TO_FP(-1), 0 }, + { FLOAT_TO_FP(-1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(1) } }; struct motion_sensor_t motion_sensors[] = { [LID_ACCEL] = { @@ -341,49 +334,49 @@ const struct fan_t fans[FAN_CH_COUNT] = { /******************************************************************************/ /* MFT channels. These are logically separate from pwm_channels. */ const struct mft_t mft_channels[] = { - [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, + [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN }, }; BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); /**********************************************************************/ /* ADC channels */ const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_1] = { - "TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_2] = { - "TEMP_IA", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_3] = { - "TEMP_GT", NPCX_ADC_CH3, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_TEMP_SENSOR_1] = { "TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_2] = { "TEMP_IA", NPCX_ADC_CH1, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_3] = { "TEMP_GT", NPCX_ADC_CH3, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, }; BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_1] = {.name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_1}, - [TEMP_SENSOR_2] = {.name = "IA", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_2}, - [TEMP_SENSOR_3] = {.name = "GT", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_3}, + [TEMP_SENSOR_1] = { .name = "Charger", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_1 }, + [TEMP_SENSOR_2] = { .name = "IA", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_2 }, + [TEMP_SENSOR_3] = { .name = "GT", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_3 }, }; BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); /* Nightfury Temperature sensors */ /* * TODO(b/138578073): These setting need to be reviewed and set appropriately - * for Nightfury. They matter when the EC is controlling the fan as opposed to DPTF - * control. + * for Nightfury. They matter when the EC is controlling the fan as opposed to + * DPTF control. */ /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_A \ - { \ +#define THERMAL_A \ + { \ .temp_host = { \ [EC_TEMP_THRESH_WARN] = 0, \ [EC_TEMP_THRESH_HIGH] = C_TO_K(75), \ |