diff options
Diffstat (limited to 'board/npcx7_evb/board.h')
| -rw-r--r-- | board/npcx7_evb/board.h | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/board/npcx7_evb/board.h b/board/npcx7_evb/board.h deleted file mode 100644 index 4bad61b152..0000000000 --- a/board/npcx7_evb/board.h +++ /dev/null @@ -1,147 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Configuration for Nuvoton M4 EB */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * npcx7 EVB version: - * 1 - EVB version 1 supports: npcx7m6g - * 2 - EVB version 2 supports: - * npcx7m6f/npcx7m6fb/npcx7m6fc/npcx7m7fc/npcx7m7wb/npcx7m7wc - */ -#if defined(CHIP_VARIANT_NPCX7M6G) -#define BOARD_VERSION 1 -#elif defined(CHIP_VARIANT_NPCX7M6F) || defined(CHIP_VARIANT_NPCX7M6FB) || \ - defined(CHIP_VARIANT_NPCX7M6FC) || defined(CHIP_VARIANT_NPCX7M7FC) || \ - defined(CHIP_VARIANT_NPCX7M7WB) || defined(CHIP_VARIANT_NPCX7M7WC) -#define BOARD_VERSION 2 -#endif - -/* EC modules */ -#define CONFIG_ADC -#define CONFIG_PWM -#define CONFIG_SPI -#define CONFIG_I2C -/* Features of eSPI */ -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -/* Optional features */ -#define CONFIG_ENABLE_JTAG_SELECTION -#define CONFIG_BOARD_VERSION_GPIO -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_I2C_CONTROLLER - -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#undef CONFIG_LOW_POWER_IDLE /* Deep Sleep Support */ -#define CONFIG_POWER_BUTTON -#undef CONFIG_PSTORE -#define CONFIG_PWM_KBLIGHT -#define CONFIG_VBOOT_HASH -#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands */ - -/* EC console commands */ -#define CONFIG_CMD_TASKREADY -#define CONFIG_CMD_STACKOVERFLOW -#define CONFIG_CMD_JUMPTAGS -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SPI_FLASH -#define CONFIG_CMD_SCRATCHPAD -#define CONFIG_CMD_I2CWEDGE - -/* I2C port for CONFIG_CMD_I2CWEDGE */ -#define I2C_PORT_MASTER NPCX_I2C_PORT0_0 -#define I2C_PORT_HOST 0 - -/* Fans for testing */ -#define CONFIG_FANS 1 - -/* Internal spi-flash on npcx7 ec */ -#define CONFIG_SPI_FLASH_PORT 0 -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_REGS -#if defined(CHIP_VARIANT_NPCX7M6FC) || defined(CHIP_VARIANT_NPCX7M7FC) || \ - defined(CHIP_VARIANT_NPCX7M7WC) -#define CONFIG_SPI_FLASH_W25Q40 /* Internal spi flash type */ -#define CONFIG_FLASH_SIZE_BYTES 0x00080000 /* 512 KB internal spi flash */ -#else -#define CONFIG_SPI_FLASH_W25Q80 /* Internal spi flash type */ -#define CONFIG_FLASH_SIZE_BYTES 0x00100000 /* 1 MB internal spi flash */ -#endif - -/* New features on npcx7 ec */ -#define CONFIG_KEYBOARD_KSO_HIGH_DRIVE /* Quasi-bidirectional buf for KSOs */ -#if (BOARD_VERSION == 2) -#define CONFIG_HIBERNATE_PSL /* Use PSL (Power Switch Logic) for hibernate */ -#define CONFIG_CLOCK_SRC_EXTERNAL /* Use external 32kHz OSC as LFCLK source */ -#if defined(CHIP_VARIANT_NPCX7M7WB) || defined(CHIP_VARIANT_NPCX7M7WC) -#define CONFIG_AUDIO_CODEC -#define CONFIG_AUDIO_CODEC_DMIC -#define CONFIG_AUDIO_CODEC_I2S_RX /* Use Audio front-end for Wake-on-Voice */ -#endif -#undef CONFIG_FANS /* Remove fan application */ -#else -#undef CONFIG_HIBERNATE_PSL /* Use PSL (Power Switch Logic) for hibernate */ -#undef CONFIG_CLOCK_SRC_EXTERNAL /* Use external 32kHz OSC as LFCLK source */ -#endif - -/* Optional feature to configure npcx7 chip */ - -/* Select which UART Controller is the Console UART */ -#undef CONFIG_CONSOLE_UART -#define CONFIG_CONSOLE_UART 0 /* 0:UART1 1:UART2 */ -/* - * This definition below actually doesn't define which UART controller to be - * used. Instead, it defines which pinouts (GPIO10/11 or GPIO64/65) are - * connected to "UART1" controller. - */ -#if (BOARD_VERSION == 2) -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART1 */ -#else -#define NPCX_UART_MODULE2 0 /* 0:GPIO10/11 as UART1 */ -#endif -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 1:GPIOD5/E2/D4/E5 as JTAG */ -#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ -#define NPCX7_PWM1_SEL 0 /* 0:GPIOC2 as I2CSCL0 1:as PWM1 (only in npcx7) */ - -#ifndef __ASSEMBLER__ - -enum adc_channel { - ADC_CH_0 = 0, - ADC_CH_1, - ADC_CH_2, - ADC_CH_3, - ADC_CH_4, - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_FAN, - PWM_CH_KBLIGHT, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum fan_channel { - FAN_CH_0, - /* Number of FAN channels */ - FAN_CH_COUNT -}; - -enum mft_channel { - MFT_CH_0, - /* Number of MFT channels */ - MFT_CH_COUNT -}; - -#include "gpio_signal.h" - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |