diff options
Diffstat (limited to 'board/npcx9_evb/board.c')
| -rw-r--r-- | board/npcx9_evb/board.c | 136 |
1 files changed, 0 insertions, 136 deletions
diff --git a/board/npcx9_evb/board.c b/board/npcx9_evb/board.c deleted file mode 100644 index 8bfc053fa5..0000000000 --- a/board/npcx9_evb/board.c +++ /dev/null @@ -1,136 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Nuvoton M4 EB board-specific configuration */ - -#include "adc.h" -#include "backlight.h" -#include "chipset.h" -#include "common.h" -#include "driver/temp_sensor/tmp112.h" -#include "extpower.h" -#include "fan.h" -#include "fan_chip.h" -#include "gpio.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "peci.h" -#include "power.h" -#include "power_button.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "registers.h" -#include "spi.h" -#include "switch.h" -#include "temp_sensor.h" -#include "temp_sensor_chip.h" -#include "timer.h" -#include "thermal.h" -#include "util.h" - -#include "gpio_list.h" - -/******************************************************************************/ -/* ADC channels. Must be in the exactly same order as in enum adc_channel. */ -const struct adc_t adc_channels[] = { - [ADC_CH_0] = {"ADC0", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_1] = {"ADC1", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_2] = {"ADC2", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_3] = {"ADC3", NPCX_ADC_CH3, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_4] = {"ADC4", NPCX_ADC_CH4, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_5] = {"ADC5", NPCX_ADC_CH5, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_6] = {"ADC6", NPCX_ADC_CH6, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_7] = {"ADC7", NPCX_ADC_CH7, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_8] = {"ADC8", NPCX_ADC_CH8, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_9] = {"ADC9", NPCX_ADC_CH9, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_10] = {"ADC10", NPCX_ADC_CH10, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_CH_11] = {"ADC11", NPCX_ADC_CH11, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/******************************************************************************/ -/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_FAN] = { 0, PWM_CONFIG_OPEN_DRAIN, 25000}, - [PWM_CH_KBLIGHT] = { 2, 0, 10000 }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -/******************************************************************************/ -/* Physical fans. These are logically separate from pwm_channels. */ -const struct fan_conf fan_conf_0 = { - .flags = FAN_USE_RPM_MODE, - .ch = 0, /* Use MFT id to control fan */ - .pgood_gpio = GPIO_PGOOD_FAN, - .enable_gpio = -1, -}; - -const struct fan_rpm fan_rpm_0 = { - .rpm_min = 1000, - .rpm_start = 1000, - .rpm_max = 5200, -}; - -const struct fan_t fans[] = { - [FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, }, -}; -BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); - -/******************************************************************************/ -/* TMP112 sensors. Must be in the exactly same order as in enum tmp112_sensor */ -const struct tmp112_sensor_t tmp112_sensors[] = { - { I2C_PORT_THERMAL, TMP112_I2C_ADDR_FLAGS0 }, -}; -BUILD_ASSERT(ARRAY_SIZE(tmp112_sensors) == TMP112_COUNT); - -/******************************************************************************/ -/* Temperature sensor. */ -const struct temp_sensor_t temp_sensors[] = { - { "System", TEMP_SENSOR_TYPE_BOARD, tmp112_get_val_k, TMP112_0 }, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -/******************************************************************************/ -/* MFT channels. These are logically separate from pwm_channels. */ -const struct mft_t mft_channels[] = { - [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, -}; -BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); - -/******************************************************************************/ -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"master0-0", NPCX_I2C_PORT0_0, 100, GPIO_I2C0_SCL0, GPIO_I2C0_SDA0}, - {"master1-0", NPCX_I2C_PORT1_0, 100, GPIO_I2C1_SCL0, GPIO_I2C1_SDA0}, - {"master2-0", NPCX_I2C_PORT2_0, 100, GPIO_I2C2_SCL0, GPIO_I2C2_SDA0}, - {"master3-0", NPCX_I2C_PORT3_0, 100, GPIO_I2C3_SCL0, GPIO_I2C3_SDA0}, - {"master7-0", NPCX_I2C_PORT7_0, 100, GPIO_I2C7_SCL0, GPIO_I2C7_SDA0}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/******************************************************************************/ -/* Wake-up pins for hibernate */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_AC_PRESENT, - GPIO_LID_OPEN, - GPIO_POWER_BUTTON_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/******************************************************************************/ -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - .output_settle_us = 40, - .debounce_down_us = 6 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 1500, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = SECOND, - .actual_key_mask = { - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xc8 /* full set */ - }, -}; |