1 files changed, 0 insertions, 110 deletions
diff --git a/board/npcx_evb_arm/board.c b/board/npcx_evb_arm/board.c
deleted file mode 100644
index 4ee03e7a00..0000000000
--- a/board/npcx_evb_arm/board.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* EC for Nuvoton M4 EB configuration */
-
-#include "adc.h"
-#include "backlight.h"
-#include "chipset.h"
-#include "common.h"
-#include "driver/temp_sensor/tmp006.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "i2c.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "peci.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "registers.h"
-#include "switch.h"
-#include "temp_sensor.h"
-#include "temp_sensor_chip.h"
-#include "timer.h"
-#include "thermal.h"
-#include "util.h"
-#include "shi_chip.h"
-
-#include "gpio_list.h"
-
-/******************************************************************************/
-/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
-const struct adc_t adc_channels[] = {
-	[ADC_CH_0] = {"ADC0", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_CH_1] = {"ADC1", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-	[ADC_CH_2] = {"ADC2", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/******************************************************************************/
-/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_FAN] = { 0, PWM_CONFIG_OPEN_DRAIN, 25000},
-	[PWM_CH_KBLIGHT] = { 1, 0, 10000 },
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = 0,	/* Use MFT id to control fan */
-	.pgood_gpio = GPIO_PGOOD_FAN,
-	.enable_gpio = -1,
-};
-
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = 1000,
-	.rpm_start = 1000,
-	.rpm_max = 5200,
-};
-
-const struct fan_t fans[] = {
-	[FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, },
-};
-BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT);
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
-	[MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/******************************************************************************/
-/* I2C ports */
-const struct i2c_port_t i2c_ports[] = {
-	{"master0-0", NPCX_I2C_PORT0_0, 100, GPIO_I2C0_SCL0, GPIO_I2C0_SDA0},
-	{"master0-1", NPCX_I2C_PORT0_1, 100, GPIO_I2C0_SCL1, GPIO_I2C0_SDA1},
-	{"master1",   NPCX_I2C_PORT1,   100, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
-	{"master2",   NPCX_I2C_PORT2,   100, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
-	{"master3",   NPCX_I2C_PORT3,   100, GPIO_I2C3_SCL, GPIO_I2C3_SDA},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/******************************************************************************/
-/* Wake-up pins for hibernate */
-const enum gpio_signal hibernate_wake_pins[] = {
-	GPIO_POWER_BUTTON_L,
-};
-const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);
-
-/******************************************************************************/
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	.output_settle_us = 40,
-	.debounce_down_us = 6 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 1500,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = SECOND,
-	.actual_key_mask = {
-		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xc8  /* full set */
-	},
-};