6 files changed, 0 insertions, 193 deletions
diff --git a/board/nucleo-f072rb/board.c b/board/nucleo-f072rb/board.c
deleted file mode 100644
index 66e8960ce7..0000000000
--- a/board/nucleo-f072rb/board.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Copyright 2016 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "common.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "registers.h"
-#include "task.h"
-#include "i2c.h"
-#include "timer.h"
-
-void button_event(enum gpio_signal signal)
-{
-	gpio_set_level(GPIO_LED_U, 1);
-}
-
-#ifdef CTS_MODULE
-/*
- * Mock interrupt handler. It's supposed to be overwritten by each suite
- * if needed.
- */
-__attribute__((weak)) void cts_irq1(enum gpio_signal signal) {}
-__attribute__((weak)) void cts_irq2(enum gpio_signal signal) {}
-#endif
-
-#include "gpio_list.h"
-
-void tick_event(void)
-{
-	static int count;
-
-	gpio_set_level(GPIO_LED_U, (count & 0x07) == 0);
-
-	count++;
-}
-DECLARE_HOOK(HOOK_TICK, tick_event, HOOK_PRIO_DEFAULT);
-
-#ifdef CTS_MODULE_I2C
-const struct i2c_port_t i2c_ports[]  = {
-	{"test", STM32_I2C1_PORT, 100, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
-};
-
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-#endif
-
-/******************************************************************************
- * Initialize board.
- */
-static void board_init(void)
-{
-	gpio_enable_interrupt(GPIO_USER_BUTTON);
-
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
diff --git a/board/nucleo-f072rb/board.h b/board/nucleo-f072rb/board.h
deleted file mode 100644
index 0ec675ab61..0000000000
--- a/board/nucleo-f072rb/board.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright 2016 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Nucleo-F072RB board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* 48 MHz SYSCLK clock frequency */
-#define CPU_CLOCK 48000000
-
-/* the UART console is on USART2 (PA14/PA15) */
-#undef CONFIG_UART_CONSOLE
-#define CONFIG_UART_CONSOLE 2
-
-/* Optional features */
-#define CONFIG_STM_HWTIMER32
-
-#ifdef CTS_MODULE
-#undef STM32_IRQ_EXT2_3_PRIORITY
-#define STM32_IRQ_EXT2_3_PRIORITY	2
-#ifdef CTS_MODULE_I2C
-#define CONFIG_I2C
-#define CONFIG_I2C_CONTROLLER
-#endif
-#endif
-
-#undef CONFIG_WATCHDOG_HELP
-#undef CONFIG_LID_SWITCH
-
-/*
- * Allow dangerous commands all the time, since we don't have a write protect
- * switch.
- */
-#define CONFIG_SYSTEM_UNLOCKED
-
-#ifndef __ASSEMBLER__
-
-/* Timer selection */
-#define TIM_CLOCK32 2
-
-#include "gpio_signal.h"
-
-#endif /* !__ASSEMBLER__ */
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/nucleo-f072rb/build.mk b/board/nucleo-f072rb/build.mk
deleted file mode 100644
index 0e069a31ad..0000000000
--- a/board/nucleo-f072rb/build.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-# -*- makefile -*-
-# Copyright 2016 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-
-# the IC is STmicro STM32F072RBT6
-CHIP:=stm32
-CHIP_FAMILY:=stm32f0
-CHIP_VARIANT:=stm32f07x
-
-board-y=board.o
diff --git a/board/nucleo-f072rb/ec.tasklist b/board/nucleo-f072rb/ec.tasklist
deleted file mode 100644
index a6385530b5..0000000000
--- a/board/nucleo-f072rb/ec.tasklist
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Copyright 2016 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/**
- * See CONFIG_TASK_LIST in config.h for details.
- */
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS,   hook_task,    NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, TASK_STACK_SIZE)
diff --git a/board/nucleo-f072rb/gpio.inc b/board/nucleo-f072rb/gpio.inc
deleted file mode 100644
index 6f3b592845..0000000000
--- a/board/nucleo-f072rb/gpio.inc
+++ /dev/null
@@ -1,47 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2016 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-GPIO_INT(USER_BUTTON, PIN(C, 13), GPIO_INT_FALLING, button_event)
-#ifdef CTS_MODULE
-#ifndef CTS_MODULE_GPIO
-/* Overload C1 for interrupt. Enabled only for non-GPIO suites as
- * GPIO tests don't require a separate notification line. */
-GPIO_INT(CTS_IRQ1, PIN(C, 1), GPIO_INT_FALLING | GPIO_PULL_UP , cts_irq1)
-/* Used to disable interrupt. This IRQ# has to match the number used for the
- * pin set above */
-#define CTS_IRQ_NUMBER STM32_IRQ_EXTI0_1
-#endif
-GPIO_INT(CTS_IRQ2, PIN(C, 2), GPIO_INT_FALLING | GPIO_PULL_UP , cts_irq2)
-#endif
-
-/* Outputs */
-GPIO(LED_U, PIN(A, 5), GPIO_OUT_LOW)
-
-/* Unimplemented signals which we need to emulate for now */
-UNIMPLEMENTED(ENTERING_RW)
-UNIMPLEMENTED(WP_L)
-
-ALTERNATE(PIN_MASK(A, 0x000C), 1, MODULE_UART,  0) /* USART2: PA2/PA3 */
-
-GPIO(I2C1_SCL, PIN(B, 6), GPIO_ODR_HIGH) /* I2C port 1 SCL */
-GPIO(I2C1_SDA, PIN(B, 7), GPIO_ODR_HIGH) /* I2C port 1 SDA */
-
-/* I2C1: PB6/7*/
-ALTERNATE(PIN_MASK(B, 0x00C0), GPIO_ALT_F1, MODULE_I2C, GPIO_PULL_UP)
-
-#ifdef CTS_MODULE
-/* CTS Signals */
-GPIO(HANDSHAKE_INPUT, PIN(A, 4), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(HANDSHAKE_OUTPUT, PIN(B, 0), GPIO_ODR_LOW)
-#ifdef CTS_MODULE_GPIO
-GPIO(INPUT_TEST, PIN(C, 1), GPIO_INPUT | GPIO_PULL_UP)
-#endif
-GPIO(OUTPUT_TEST, PIN(C, 0), GPIO_ODR_LOW)
-#endif
diff --git a/board/nucleo-f072rb/openocd-flash.cfg b/board/nucleo-f072rb/openocd-flash.cfg
deleted file mode 100644
index 91e3805c74..0000000000
--- a/board/nucleo-f072rb/openocd-flash.cfg
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright 2016 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-
-source [find board/st_nucleo_f0.cfg]
-
-# For flashing, force the board into reset on connect, this ensures that
-# code running on the core can't interfere with programming.
-reset_config connect_assert_srst
-
-gdb_port 0
-tcl_port 0
-telnet_port 0
-init
-reset init
-flash write_image erase $BUILD_DIR/ec.bin 0x08000000
-reset halt
-resume
-shutdown