diff options
Diffstat (limited to 'board/nucleo-f412zg/README.md')
| -rw-r--r-- | board/nucleo-f412zg/README.md | 83 |
1 files changed, 0 insertions, 83 deletions
diff --git a/board/nucleo-f412zg/README.md b/board/nucleo-f412zg/README.md deleted file mode 100644 index f2fa682e6f..0000000000 --- a/board/nucleo-f412zg/README.md +++ /dev/null @@ -1,83 +0,0 @@ -# Nucleo F412ZG - -This is a simpler EC example for the ST Nucleo F412ZG development board. - -# Quick Start - -The Nucleo dev boards have lots of developer friendly features, like an -in-circuit debugger/programmer/UART-bridge, programmable LEDs, and a button, to -name a few. - -The built-in debugger can be connected to using a Micro USB cable. It provides -three great interfaces to the host. 1. Mass storage interface for drag-drop -programming 2. Full ST-Link in-circuit debugger 3. UART bridge for logs/consoles - -We will use a few of these interfaces below to program and interact with out -Nucleo dev board. - -## Build - -```bash -make BOARD=nucleo-f412zg -j -``` - -## Program - -The easiest way to flash the Nucleo board is to Copy-Paste/Drag-Drop the -firmware image onto the exposed mass storage drive. - -Open a file browser and `Copy` the file in `build/nucleo-f412zg/ec.bin`. Now, -find the removable storage that the Nucleo device has presented, and `Paste` the -file into the directory. - -## Interact - -After the Nucleo finishes programming, you can open the EC console. On -GNU/Linux, this is mapped to `/dev/ttyACM0`. - -Install `minicom` and issue the following command: - -```bash -minicom -D/dev/ttyACM0 -``` - -# Unit Testing - -A fun EC feature is that unit tests can be run on-device. - -This is made possible by an alternative build rule that generates a test image -per unit test. These test images use a unit test specific taskset and console -command to trigger them. - -## Create - -To enable an existing unit test, add it to the [build.mk](build.mk)'s -`test-list-y` variable. - -See the main [README.md](/README.md) on how to write a new unit test. - -## Build - -To build all unit test images for this board, run the following command: - -```bash -make BOARD=nucleo-f412zg tests -``` - -You can build a specific unit test image by changing `tests` to `test-aes`, for -the `aes` unit test. - -## Flash - -Copy/paste the `build/nucleo-f412zg/${TEST}/${TEST}.bin` file to the Nucleo's -mass storage drive, where `${TEST}` is the name of the unit test, like `aes`. - -## Run - -1. Connect to UART console - -```bash -minicom -D/dev/ttyACM0 -``` - -1. Run the `runtest` command |