1 files changed, 4 insertions, 84 deletions
diff --git a/board/nucleo-f412zg/README.md b/board/nucleo-f412zg/README.md
index fcdd5e40df..df63ef05d6 100644
--- a/board/nucleo-f412zg/README.md
+++ b/board/nucleo-f412zg/README.md
@@ -1,85 +1,5 @@
-# Nucleo F412ZG
+*** note
+**Warning: This document is old & has moved.  Please update any links:**<br>
+https://chromium.googlesource.com/chromiumos/platform/ec/+/HEAD/board/nucleo-f412zg/README.md
+***
 
-This is a simpler EC example for the ST Nucleo F412ZG
-development board.
-
-# Quick Start
-
-The Nucleo dev boards have lots of developer friendly features,
-like an in-circuit debugger/programmer/UART-bridge, programmable
-LEDs, and a button, to name a few.
-
-The built-in debugger can be connected to using a Micro USB cable.
-It provides three great interfaces to the host.
-1. Mass storage interface for drag-drop programming
-2. Full ST-Link in-circuit debugger
-3. UART bridge for logs/consoles
-
-We will use a few of these interfaces below to program and interact
-with out Nucleo dev board.
-
-## Build
-
-```bash
-make BOARD=nucleo-f412zg -j
-```
-
-## Program
-
-The easiest way to flash the Nucleo board is to Copy-Paste/Drag-Drop
-the firmware image onto the exposed mass storage drive.
-
-Open a file browser and `Copy` the file in `build/nucleo-f412zg/ec.bin`.
-Now, find the removable storage that the Nucleo device has presented,
-and `Paste` the file into the directory.
-
-## Interact
-
-After the Nucelo finishes programming, you can open the EC console.
-On GNU/Linux, this is mapped to `/dev/ttyACM0`.
-
-Install `minicom` and issue the following command:
-
-```bash
-minicom -D/dev/ttyACM0
-```
-
-# Unit Testing
-
-A fun EC feature is that unit tests can be run on-device.
-
-This is made possible by an alternative build rule that generates a
-test image per unit test. These test images use a unit test specific taskset
-and console command to trigger them.
-
-## Create
-
-To enable an existing unit test, add it to the [build.mk](build.mk)'s
-`test-list-y` variable.
-
-See the main [README.md](/README.md) on how to write a new unit test.
-
-## Build
-
-To build all unit test images for this board, run the following command:
-
-```bash
-make BOARD=nucleo-f412zg tests
-```
-
-You can build a specific unit test image by changing `tests` to `test-aes`,
-for the `aes` unit test.
-
-## Flash
-
-Copy/paste the `build/nucleo-f412zg/${TEST}/${TEST}.bin` file to the
-Nucleo's mass storage drive, where `${TEST}` is the name of the unit test,
-like `aes`.
-
-## Run
-
-1. Connect to UART console
-   ```bash
-   minicom -D/dev/ttyACM0
-   ```
-2. Run the `runtest` command
-\ No newline at end of file