diff options
Diffstat (limited to 'board/oak/board.h')
| -rw-r--r-- | board/oak/board.h | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/board/oak/board.h b/board/oak/board.h index b40215a7bf..6f5ed3fc87 100644 --- a/board/oak/board.h +++ b/board/oak/board.h @@ -1,4 +1,4 @@ -/* Copyright 2015 The Chromium OS Authors. All rights reserved. +/* Copyright 2015 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -23,7 +23,7 @@ #endif #define CONFIG_ADC -#undef CONFIG_ADC_WATCHDOG +#undef CONFIG_ADC_WATCHDOG #if BOARD_REV >= OAK_REV5 /* Add for Ambient Light Sensor */ @@ -107,10 +107,10 @@ #define CONFIG_SPI_CONTROLLER #define CONFIG_STM_HWTIMER32 #define CONFIG_VBOOT_HASH -#undef CONFIG_WATCHDOG_HELP +#undef CONFIG_WATCHDOG_HELP #define CONFIG_SWITCH #define CONFIG_BOARD_VERSION_GPIO -#undef CONFIG_UART_CONSOLE +#undef CONFIG_UART_CONSOLE #define CONFIG_UART_CONSOLE 1 #define CONFIG_TEMP_SENSOR #define CONFIG_TEMP_SENSOR_TMP432 @@ -149,19 +149,19 @@ #define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C, GPIO_D /* 2 I2C master ports, connect to battery, charger, pd and USB switches */ -#define I2C_PORT_MASTER 0 -#define I2C_PORT_ACCEL 0 -#define I2C_PORT_ALS 0 +#define I2C_PORT_MASTER 0 +#define I2C_PORT_ACCEL 0 +#define I2C_PORT_ALS 0 #define I2C_PORT_BATTERY 0 #define I2C_PORT_CHARGER 0 #define I2C_PORT_PERICOM 0 #define I2C_PORT_THERMAL 0 -#define I2C_PORT_PD_MCU 1 +#define I2C_PORT_PD_MCU 1 #define I2C_PORT_USB_MUX 1 -#define I2C_PORT_TCPC 1 +#define I2C_PORT_TCPC 1 /* Enable Accel over SPI */ -#define CONFIG_SPI_ACCEL_PORT 0 /* First SPI controller port (SPI2) */ +#define CONFIG_SPI_ACCEL_PORT 0 /* First SPI controller port (SPI2) */ /* Ambient Light Sensor address */ #define OPT3001_I2C_ADDR_FLAGS OPT3001_I2C_ADDR1_FLAGS @@ -171,12 +171,12 @@ #define TIM_WATCHDOG 4 /* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_FASTBOOT)) +#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY) | \ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_FASTBOOT)) #include "gpio_signal.h" @@ -194,9 +194,9 @@ enum pwm_channel { }; enum adc_channel { - ADC_PSYS = 0, /* PC1: STM32_AIN(2) */ + ADC_PSYS = 0, /* PC1: STM32_AIN(2) */ ADC_AMON_BMON, /* PC0: STM32_AIN(10) */ - ADC_VBUS, /* PA2: STM32_AIN(11) */ + ADC_VBUS, /* PA2: STM32_AIN(11) */ ADC_CH_COUNT }; @@ -235,16 +235,16 @@ enum als_id { * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ #define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ /* Define typical operating power and max power */ #define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_MAX_CURRENT_MA CONFIG_CHARGER_MAX_INPUT_CURRENT -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_MAX_POWER_MW 60000 +#define PD_MAX_CURRENT_MA CONFIG_CHARGER_MAX_INPUT_CURRENT +#define PD_MAX_VOLTAGE_MV 20000 /* Reset PD MCU */ void board_reset_pd_mcu(void); @@ -256,6 +256,6 @@ void board_typec_dp_on(int port); void board_typec_dp_off(int port, int *dp_flags); void board_typec_dp_set(int port, int level); -#endif /* !__ASSEMBLER__ */ +#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ +#endif /* __CROS_EC_BOARD_H */ |