diff options
Diffstat (limited to 'board/oak/board.h')
| -rw-r--r-- | board/oak/board.h | 263 |
1 files changed, 0 insertions, 263 deletions
diff --git a/board/oak/board.h b/board/oak/board.h deleted file mode 100644 index e82907a508..0000000000 --- a/board/oak/board.h +++ /dev/null @@ -1,263 +0,0 @@ -/* Copyright 2015 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* oak board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* board revision */ -#include "board_revs.h" - -/* Free up some flash space */ -#define CONFIG_DEBUG_ASSERT_BRIEF -#define CONFIG_USB_PD_DEBUG_LEVEL 0 - -#define CONFIG_LTO - -#if BOARD_REV >= OAK_REV5 -#define CONFIG_ACCELGYRO_BMI160 -#define CONFIG_ACCEL_KX022 -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#endif - -#define CONFIG_ADC -#undef CONFIG_ADC_WATCHDOG - -#if BOARD_REV >= OAK_REV5 -/* Add for Ambient Light Sensor */ -#define CONFIG_ALS_OPT3001 -#define CONFIG_CMD_ALS -#endif - -/* Add for AC adaptor, charger, battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_BAT_PRESENT_L -#define CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD -#define CONFIG_BATTERY_SMART -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER - -#define CONFIG_CHARGER_INPUT_CURRENT 512 - -#if BOARD_REV == OAK_REV1 -#define CONFIG_CHARGER_BQ24773 -#define CONFIG_CHARGER_MAX_INPUT_CURRENT 2150 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -#else -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER_ISL9237 -#define CONFIG_CHARGER_MAX_INPUT_CURRENT 2250 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -#endif /* BOARD_REV */ - -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHIPSET_MT817X -#define CONFIG_CMD_TYPEC -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_FORCE_CONSOLE_RESUME - -/* - * EC_WAKE: PA0 - WKUP1 - * POWER_BUTTON_L: PB5 - WKUP6 - */ -#define CONFIG_HIBERNATE -#if BOARD_REV <= OAK_REV4 -#define CONFIG_HIBERNATE_WAKEUP_PINS (STM32_PWR_CSR_EWUP6) -#else -#define CONFIG_HIBERNATE_WAKEUP_PINS (STM32_PWR_CSR_EWUP1) -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL -#define CONFIG_LID_ANGLE_UPDATE -#endif /* BOARD_REV */ -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_HOSTCMD_PD -#define CONFIG_HOSTCMD_PD_PANIC -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_LED_COMMON -#define CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_COMMON -#define CONFIG_USB_CHARGER -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_SPI -#define CONFIG_SPI_CONTROLLER -#define CONFIG_STM_HWTIMER32 -#define CONFIG_VBOOT_HASH -#undef CONFIG_WATCHDOG_HELP -#define CONFIG_SWITCH -#define CONFIG_BOARD_VERSION_GPIO -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 1 -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_TMP432 -#define CONFIG_DPTF - -/* UART DMA */ -#undef CONFIG_UART_TX_DMA -#undef CONFIG_UART_RX_DMA - -/* - * Allow dangerous commands. - * TODO: Remove this config before production. - */ -#define CONFIG_SYSTEM_UNLOCKED - -/* Optional features */ -#define CONFIG_CMD_HOSTCMD -#undef CONFIG_CMD_MFALLOW - -/* Drivers */ -/* USB Mux */ -#define CONFIG_USB_MUX_PI3USB30532 -#if BOARD_REV >= OAK_REV5 -#define CONFIG_USB_MUX_PS8740 -#endif -/* BC 1.2 charger */ -#define CONFIG_BC12_DETECT_PI3USB9281 -#define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 - -#ifndef __ASSEMBLER__ - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* Keyboard output port list */ -#define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C, GPIO_D - -/* 2 I2C master ports, connect to battery, charger, pd and USB switches */ -#define I2C_PORT_MASTER 0 -#define I2C_PORT_ACCEL 0 -#define I2C_PORT_ALS 0 -#define I2C_PORT_BATTERY 0 -#define I2C_PORT_CHARGER 0 -#define I2C_PORT_PERICOM 0 -#define I2C_PORT_THERMAL 0 -#define I2C_PORT_PD_MCU 1 -#define I2C_PORT_USB_MUX 1 -#define I2C_PORT_TCPC 1 - -/* Enable Accel over SPI */ -#define CONFIG_SPI_ACCEL_PORT 0 /* First SPI master port (SPI2) */ - -/* Ambient Light Sensor address */ -#define OPT3001_I2C_ADDR_FLAGS OPT3001_I2C_ADDR1_FLAGS - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_WATCHDOG 4 - -/* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_FASTBOOT)) - -#include "gpio_signal.h" - -enum power_signal { - MTK_POWER_GOOD = 0, - MTK_SUSPEND_ASSERTED, - /* Number of power signals */ - POWER_SIGNAL_COUNT -}; - -enum pwm_channel { - PWM_CH_POWER_LED = 0, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum adc_channel { - ADC_PSYS = 0, /* PC1: STM32_AIN(2) */ - ADC_AMON_BMON, /* PC0: STM32_AIN(10) */ - ADC_VBUS, /* PA2: STM32_AIN(11) */ - ADC_CH_COUNT -}; - -enum temp_sensor_id { - /* TMP432 local and remote sensors */ - TEMP_SENSOR_I2C_TMP432_LOCAL, - TEMP_SENSOR_I2C_TMP432_REMOTE1, - TEMP_SENSOR_I2C_TMP432_REMOTE2, - - /* Battery temperature sensor */ - TEMP_SENSOR_BATTERY, - - TEMP_SENSOR_COUNT -}; - -enum sensor_id { -#ifdef CONFIG_ACCELGYRO_BMI160 - BASE_ACCEL, - BASE_GYRO, -#endif -#ifdef CONFIG_ACCEL_KX022 - LID_ACCEL, -#endif - SENSOR_COUNT, -}; - -/* Light sensors */ -enum als_id { - ALS_OPT3001 = 0, - - ALS_COUNT -}; - -/* TODO: determine the following board specific type-C power constants */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_MAX_CURRENT_MA CONFIG_CHARGER_MAX_INPUT_CURRENT -#define PD_MAX_VOLTAGE_MV 20000 - -/* Reset PD MCU */ -void board_reset_pd_mcu(void); -/* Set AP reset pin according to parameter */ -void board_set_ap_reset(int asserted); - -/* Control type-C DP route and hotplug detect signal */ -void board_typec_dp_on(int port); -void board_typec_dp_off(int port, int *dp_flags); -void board_typec_dp_set(int port, int level); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |