diff options
Diffstat (limited to 'board/palkia/board.c')
| -rw-r--r-- | board/palkia/board.c | 85 |
1 files changed, 43 insertions, 42 deletions
diff --git a/board/palkia/board.c b/board/palkia/board.c index cbf0e3178e..e0aab014a0 100644 --- a/board/palkia/board.c +++ b/board/palkia/board.c @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -39,13 +39,12 @@ #include "usbc_ppc.h" #include "util.h" -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) static const uint8_t actual_key_mask[KEYBOARD_COLS_MAX] = { - 0x01, 0x68, 0xbd, 0x03, 0x7e, 0xff, 0xff, - 0xff, 0xff, 0x03, 0xfd, 0x48, 0x03, 0xff, - 0xf7, 0x16 /* full set */ + 0x01, 0x68, 0xbd, 0x03, 0x7e, 0xff, 0xff, 0xff, + 0xff, 0x03, 0xfd, 0x48, 0x03, 0xff, 0xf7, 0x16 /* full set */ }; /* GPIO to enable/disable the USB Type-A port. */ @@ -119,16 +118,16 @@ static void board_lid_interrupt(enum gpio_signal signal) /******************************************************************************/ /* SPI devices */ -const struct spi_device_t spi_devices[] = { -}; +const struct spi_device_t spi_devices[] = {}; const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); /******************************************************************************/ /* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ const struct pwm_t pwm_channels[] = { [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 }, - [PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN, - .freq = 25000}, + [PWM_CH_FAN] = { .channel = 5, + .flags = PWM_CONFIG_OPEN_DRAIN, + .freq = 25000 }, }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); @@ -145,11 +144,13 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { } }; -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { +const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { [USB_PD_PORT_TCPC_0] = { - .usb_port = USB_PD_PORT_TCPC_0, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, + .mux = &(const struct usb_mux) { + .usb_port = USB_PD_PORT_TCPC_0, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, }, }; @@ -165,7 +166,7 @@ const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = { const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ + .ch = MFT_CH_0, /* Use MFT id to control fan */ .pgood_gpio = -1, .enable_gpio = GPIO_EN_PP5000_FAN, }; @@ -184,40 +185,40 @@ const struct fan_t fans[FAN_CH_COUNT] = { /******************************************************************************/ /* MFT channels. These are logically separate from pwm_channels. */ const struct mft_t mft_channels[] = { - [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, + [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN }, }; BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); /* ADC channels */ const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_1] = { - "TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_2] = { - "TEMP_5V_REG", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_3] = { - "TEMP_AMB", NPCX_ADC_CH3, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_4] = { - "TEMP_CPU", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_TEMP_SENSOR_1] = { "TEMP_CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_2] = { "TEMP_5V_REG", NPCX_ADC_CH1, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_3] = { "TEMP_AMB", NPCX_ADC_CH3, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_4] = { "TEMP_CPU", NPCX_ADC_CH2, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, }; BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_1] = {.name = "Temp1", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_1}, - [TEMP_SENSOR_2] = {.name = "Temp2", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_2}, - [TEMP_SENSOR_3] = {.name = "Temp3", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_3}, - [TEMP_SENSOR_4] = {.name = "Temp4", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_4}, + [TEMP_SENSOR_1] = { .name = "Temp1", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_1 }, + [TEMP_SENSOR_2] = { .name = "Temp2", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_2 }, + [TEMP_SENSOR_3] = { .name = "Temp3", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_3 }, + [TEMP_SENSOR_4] = { .name = "Temp4", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_30k9_47k_4050b, + .idx = ADC_TEMP_SENSOR_4 }, }; BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); @@ -225,8 +226,8 @@ BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_A \ - { \ +#define THERMAL_A \ + { \ .temp_host = { \ [EC_TEMP_THRESH_WARN] = 0, \ [EC_TEMP_THRESH_HIGH] = C_TO_K(65), \ |