1 files changed, 0 insertions, 114 deletions
diff --git a/board/plankton/board.h b/board/plankton/board.h
deleted file mode 100644
index 39ab706cd2..0000000000
--- a/board/plankton/board.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* Copyright 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Plankton board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* 48 MHz SYSCLK clock frequency */
-#define CPU_CLOCK 48000000
-
-/* the UART console is on USART2 (PA14/PA15) */
-#undef CONFIG_UART_CONSOLE
-#define CONFIG_UART_CONSOLE 2
-
-/* Optional features */
-#define CONFIG_STM_HWTIMER32
-#define CONFIG_USB_POWER_DELIVERY
-#define CONFIG_USB_PD_TCPMV1
-#define CONFIG_USB_PD_ALT_MODE
-#define CONFIG_USB_PD_COMM_DISABLED
-#define CONFIG_USB_PD_CUSTOM_PDO
-#define CONFIG_USB_PD_DUAL_ROLE
-#define CONFIG_USB_PD_DYNAMIC_SRC_CAP
-#define CONFIG_USB_PD_IDENTITY_HW_VERS 1
-#define CONFIG_USB_PD_IDENTITY_SW_VERS 1
-#define CONFIG_USB_PD_INTERNAL_COMP
-#define CONFIG_USB_PD_PORT_MAX_COUNT 1
-#define CONFIG_USB_PD_TCPC
-#define CONFIG_USB_PD_TCPM_STUB
-#define CONFIG_USB_PD_VBUS_DETECT_GPIO
-#define CONFIG_ADC
-#define CONFIG_HW_CRC
-#define CONFIG_I2C
-#define CONFIG_I2C_CONTROLLER
-#define CONFIG_INA219
-#define CONFIG_IO_EXPANDER_PCA9534
-#undef CONFIG_WATCHDOG_HELP
-#undef CONFIG_LID_SWITCH
-#undef CONFIG_TASK_PROFILING
-
-/* I2C ports configuration */
-#define I2C_PORT_MASTER 1
-
-/* USB configuration */
-#define CONFIG_USB_PID 0x500c
-#define CONFIG_USB_BCD_DEV 0x0001 /* v 0.01 */
-
-/*
- * Allow dangerous commands all the time, since we don't have a write protect
- * switch.
- */
-#define CONFIG_SYSTEM_UNLOCKED
-
-#ifndef __ASSEMBLER__
-
-/* Timer selection */
-#define TIM_CLOCK32 2
-#define TIM_ADC     3
-
-#include "gpio_signal.h"
-
-/* ADC signal */
-enum adc_channel {
-	ADC_CH_CC1_PD = 0,
-	ADC_CH_CC2_PD,
-	/* Number of ADC channels */
-	ADC_CH_COUNT
-};
-
-enum board_src_cap {
-	SRC_CAP_5V = 0,
-	SRC_CAP_12V,
-	SRC_CAP_20V,
-};
-
-/* 3.0A Rp */
-#define PD_SRC_VNC            PD_SRC_3_0_VNC_MV
-#define PD_SNK_RD_THRESHOLD   PD_SRC_3_0_RD_THRESH_MV
-
-/* delay necessary for the voltage transition on the power supply */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY  50000 /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY 50000 /* us */
-
-/* Define typical operating power and max power */
-#define PD_OPERATING_POWER_MW 5000
-#define PD_MAX_POWER_MW       60000
-#define PD_MAX_CURRENT_MA     3000
-#define PD_MAX_VOLTAGE_MV     20000
-
-/* Set USB PD source capability */
-void board_set_source_cap(enum board_src_cap cap);
-
-/* Reset USB hub if USB hub is switched to type-C port */
-void board_maybe_reset_usb_hub(void);
-
-/* Get fake ADC reading */
-int board_fake_pd_adc_read(int cc);
-
-/* Set pull-up/pull-down on CC lines */
-void board_pd_set_host_mode(int enable);
-
-/*
- * Whether the board is in USB hub mode or not
- *
- * @return 1 when in hub mode, 0 when not, and -1 on error.
- */
-int board_in_hub_mode(void);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */