diff options
Diffstat (limited to 'board/plankton/usb_pd_policy.c')
| -rw-r--r-- | board/plankton/usb_pd_policy.c | 45 |
1 files changed, 20 insertions, 25 deletions
diff --git a/board/plankton/usb_pd_policy.c b/board/plankton/usb_pd_policy.c index 238f2297f5..355919e06a 100644 --- a/board/plankton/usb_pd_policy.c +++ b/board/plankton/usb_pd_policy.c @@ -1,4 +1,4 @@ -/* Copyright 2014 The Chromium OS Authors. All rights reserved. +/* Copyright 2014 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -18,8 +18,8 @@ #include "usb_pd_pdo.h" #include "usb_pd_tcpm.h" -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) +#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ##args) +#define CPRINTS(format, args...) cprints(CC_USBPD, format, ##args) /* Acceptable margin between requested VBUS and measured value */ #define MARGIN_MV 400 /* mV */ @@ -27,7 +27,6 @@ /* Whether alternate mode has been entered or not */ static int alt_mode; - void pd_set_input_current_limit(int port, uint32_t max_ma, uint32_t supply_voltage) { @@ -77,22 +76,18 @@ __override int pd_check_power_swap(int port) return 1; } -__override int pd_check_data_swap(int port, - enum pd_data_role data_role) +__override int pd_check_data_swap(int port, enum pd_data_role data_role) { /* Always allow data swap */ return 1; } -__override void pd_check_pr_role(int port, - enum pd_power_role pr_role, +__override void pd_check_pr_role(int port, enum pd_power_role pr_role, int flags) { } -__override void pd_check_dr_role(int port, - enum pd_data_role dr_role, - int flags) +__override void pd_check_dr_role(int port, enum pd_data_role dr_role, int flags) { /* If Plankton is in USB hub mode, always act as UFP */ if (board_in_hub_mode() && dr_role == PD_ROLE_DFP && @@ -110,8 +105,8 @@ const uint32_t vdo_idh = VDO_IDH(0, /* data caps as USB host */ const uint32_t vdo_product = VDO_PRODUCT(CONFIG_USB_PID, CONFIG_USB_BCD_DEV); const uint32_t vdo_ama = VDO_AMA(CONFIG_USB_PD_IDENTITY_HW_VERS, - CONFIG_USB_PD_IDENTITY_SW_VERS, - 0, 0, 0, 0, /* SS[TR][12] */ + CONFIG_USB_PD_IDENTITY_SW_VERS, 0, 0, 0, + 0, /* SS[TR][12] */ 0, /* Vconn power */ 0, /* Vconn power required */ 1, /* Vbus power required */ @@ -139,13 +134,13 @@ static int svdm_response_svids(int port, uint32_t *payload) #define MODE_CNT 1 #define OPOS 1 -const uint32_t vdo_dp_mode[MODE_CNT] = { - VDO_MODE_DP(0, /* UFP pin cfg supported : none */ +const uint32_t vdo_dp_mode[MODE_CNT] = { + VDO_MODE_DP(0, /* UFP pin cfg supported : none */ MODE_DP_PIN_E, /* DFP pin cfg supported */ - 1, /* no usb2.0 signalling in AMode */ - CABLE_PLUG, /* its a plug */ - MODE_DP_V13, /* DPv1.3 Support, no Gen2 */ - MODE_DP_SNK) /* Its a sink only */ + 1, /* no usb2.0 signalling in AMode */ + CABLE_PLUG, /* its a plug */ + MODE_DP_V13, /* DPv1.3 Support, no Gen2 */ + MODE_DP_SNK) /* Its a sink only */ }; static int svdm_response_modes(int port, uint32_t *payload) @@ -167,13 +162,13 @@ static int dp_status(int port, uint32_t *payload) if (opos != OPOS) return 0; /* nak */ - payload[1] = VDO_DP_STATUS(0, /* IRQ_HPD */ - (hpd == 1), /* HPD_HI|LOW */ - 0, /* request exit DP */ - 0, /* request exit USB */ - 0, /* MF pref */ + payload[1] = VDO_DP_STATUS(0, /* IRQ_HPD */ + (hpd == 1), /* HPD_HI|LOW */ + 0, /* request exit DP */ + 0, /* request exit USB */ + 0, /* MF pref */ !gpio_get_level(GPIO_USBC_SS_USB_MODE), - 0, /* power low */ + 0, /* power low */ 0x2); return 2; } |