diff options
Diffstat (limited to 'board/polyberry/gpio.inc')
| -rw-r--r-- | board/polyberry/gpio.inc | 82 |
1 files changed, 0 insertions, 82 deletions
diff --git a/board/polyberry/gpio.inc b/board/polyberry/gpio.inc deleted file mode 100644 index 536dccc5ff..0000000000 --- a/board/polyberry/gpio.inc +++ /dev/null @@ -1,82 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -/* Outputs */ -GPIO(PM_RESET_L, PIN(D, 0), GPIO_OUT_HIGH) -GPIO(PM_KPD_PWR_L, PIN(D, 1), GPIO_OUT_HIGH) -GPIO(AP_RESET_L, PIN(D, 2), GPIO_OUT_HIGH) -GPIO(AP_FORCED_USB_BOOT, PIN(D, 3), GPIO_OUT_LOW) -GPIO(AP_PS_HOLD, PIN(D, 4), GPIO_OUT_HIGH) - -GPIO(MUX_EN_L, PIN(A, 7), GPIO_INPUT) -GPIO(USB_MUX_SEL, PIN(A, 6), GPIO_OUT_HIGH) -GPIO(PHY_RESET, PIN(C, 4), GPIO_INPUT) -GPIO(LED_BLUE, PIN(A, 2), GPIO_ODR_LOW) -GPIO(LED_GRN, PIN(B, 8), GPIO_ODR_LOW) -GPIO(LED_RED, PIN(B, 15), GPIO_ODR_LOW) - -/* Clock function */ -GPIO(MCU_TO_PHY_MCO, PIN(C, 9), GPIO_INPUT) - - -/* These pin assignments aren't used as GPIO. Let's note them here - * for readability but not initialize them. - * USART1 TX/RX - AP - * GPIO(MCU_UART1_TX, PIN(A, 9), GPIO_INPUT) - * GPIO(MCU_UART1_RX, PIN(A, 10), GPIO_INPUT) - * USART2 TX/RX - Sensor Hub - * GPIO(MCU_UART2_TX, PIN(D, 5), GPIO_INPUT) - * GPIO(MCU_UART2_RX, PIN(D, 6), GPIO_INPUT) - - * USART3 TX/RX - Console - * GPIO(MCU_UART3_TX, PIN(C, 10), GPIO_INPUT) - * GPIO(MCU_UART3_RX, PIN(C, 11), GPIO_INPUT) - * USART5 TX/RX - SSC (?) - * GPIO(MCU_UART5_TX, PIN(E, 7), GPIO_INPUT) - * GPIO(MCU_UART5_RX, PIN(E, 8), GPIO_INPUT) - */ - -/* USB pins */ -GPIO(USB_FS_DM, PIN(A, 11), GPIO_INPUT) -GPIO(USB_FS_DP, PIN(A, 12), GPIO_INPUT) - -GPIO(USB_HS_ULPI_NXT, PIN(C, 3), GPIO_INPUT) -GPIO(USB_HS_ULPI_DIR, PIN(C, 2), GPIO_INPUT) -GPIO(USB_HS_ULPI_STP, PIN(C, 0), GPIO_INPUT) -GPIO(USB_HS_ULPI_CK, PIN(A, 5), GPIO_INPUT) - -GPIO(USB_HS_ULPI_D7, PIN(B, 5), GPIO_INPUT) -GPIO(USB_HS_ULPI_D6, PIN(B,13), GPIO_INPUT) -GPIO(USB_HS_ULPI_D5, PIN(B,12), GPIO_INPUT) -GPIO(USB_HS_ULPI_D4, PIN(B, 2), GPIO_INPUT) -GPIO(USB_HS_ULPI_D3, PIN(B,10), GPIO_INPUT) -GPIO(USB_HS_ULPI_D2, PIN(B, 1), GPIO_INPUT) -GPIO(USB_HS_ULPI_D1, PIN(B, 0), GPIO_INPUT) -GPIO(USB_HS_ULPI_D0, PIN(A, 3), GPIO_INPUT) - - -/* Unimplemented signals since we are not an EC */ -UNIMPLEMENTED(ENTERING_RW) -UNIMPLEMENTED(WP_L) - - -ALTERNATE(PIN_MASK(A, 0x0600), 7, MODULE_UART, 0) /* USART1: PA9/PA10 - AP */ -ALTERNATE(PIN_MASK(D, 0x0060), 7, MODULE_UART, 0) /* USART2: PD5/PD6 - SH */ -ALTERNATE(PIN_MASK(C, 0x0c00), 7, MODULE_UART, 0) /* USART3: PC10/PC11 - Console */ -ALTERNATE(PIN_MASK(D, 0x00c0), 8, MODULE_UART, 0) /* USART5: PE7/PE8 - SSC */ - -/* OTG FS */ -ALTERNATE(PIN_MASK(A, 0x1800), 10, MODULE_USB, 0) /* DWC USB OTG: PA11/12 */ - -/* OTG HS */ -ALTERNATE(PIN_MASK(A, 0x0028), 10, MODULE_USB, 0) /* DWC USB OTG HS */ -ALTERNATE(PIN_MASK(B, 0x3427), 10, MODULE_USB, 0) /* DWC USB OTG HS */ -ALTERNATE(PIN_MASK(C, 0x000d), 10, MODULE_USB, 0) /* DWC USB OTG HS */ -ALTERNATE(PIN_MASK(C, 0x0200), 0, MODULE_MCO, 0) /* MCO2: PC9 */ |