diff options
Diffstat (limited to 'board/puff/board.h')
| -rw-r--r-- | board/puff/board.h | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/board/puff/board.h b/board/puff/board.h deleted file mode 100644 index 81fe94f363..0000000000 --- a/board/puff/board.h +++ /dev/null @@ -1,238 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Puff board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Bringup/debug config items. Remove before shipping. */ -#define CONFIG_SYSTEM_UNLOCKED -#define CONFIG_BRINGUP - - -/* NPCX7 config */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ - -/* Internal SPI flash on NPCX796FC is 512 kB */ -#define CONFIG_FLASH_SIZE (512 * 1024) -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ - -/* EC Defines */ -#define CONFIG_ADC -#define CONFIG_BOARD_HAS_RTC_RESET -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_DEDICATED_RECOVERY_BUTTON -/* TODO: (b/143496253) re-enable CEC */ -/* #define CONFIG_CEC */ -#define CONFIG_CRC8 -#define CONFIG_CROS_BOARD_INFO -#define CONFIG_EMULATED_SYSRQ -#undef CONFIG_KEYBOARD_BOOT_KEYS -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_USE_HOST_EVENT -#undef CONFIG_KEYBOARD_RUNTIME_KEYS -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_LED_COMMON -#undef CONFIG_LID_SWITCH -#define CONFIG_PWM -#define CONFIG_SHA256 -#define CONFIG_SHA256_UNROLLED -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -#define CONFIG_SUPPRESSED_HOST_COMMANDS \ - EC_CMD_CONSOLE_SNAPSHOT, EC_CMD_CONSOLE_READ, EC_CMD_PD_GET_LOG_ENTRY - -/* EC Commands */ -#define CONFIG_CMD_BUTTON -/* Include CLI command needed to support CCD testing. */ -#define CONFIG_CMD_CHARGEN -#undef CONFIG_CMD_FASTCHARGE -#undef CONFIG_CMD_KEYBOARD -#define CONFIG_CMD_PD_CONTROL -#undef CONFIG_CMD_PWR_AVG -#define CONFIG_CMD_PPC_DUMP - -/* Chipset config */ -#define CONFIG_CHIPSET_COMETLAKE_DISCRETE -/* check */ -#define CONFIG_CHIPSET_CAN_THROTTLE -#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW - -/* Dedicated barreljack charger port */ -#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT -#define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1 -#define DEDICATED_CHARGE_PORT 1 - -/* Charger */ -#define CONFIG_CHARGE_MANAGER - -#undef CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 30000 - -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_IGNORE_LID -#define CONFIG_POWER_BUTTON_X86 -/* Check: */ -#define CONFIG_POWER_BUTTON_INIT_IDLE -#define CONFIG_POWER_COMMON -/* from fizz - Check */ -/* check: #define CONFIG_EXTPOWER_DEBOUNCE_MS */ -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_DELAY_DSW_PWROK_TO_PWRBTN -#define CONFIG_POWER_PP5000_CONTROL -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_S0IX_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_INA3221 - -/* TODO: (b/143501304) Use correct PD delay values */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ -#define PD_VCONN_SWAP_DELAY 5000 /* us */ - -/* TODO: (b/143501304) Use correct PD power values */ -#define PD_OPERATING_POWER_MW 30000 -#define PD_MAX_POWER_MW 100000 -#define PD_MAX_CURRENT_MA 5000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Fan and temp. */ -#define CONFIG_FANS 1 -#undef CONFIG_FAN_INIT_SPEED -#define CONFIG_FAN_INIT_SPEED 50 -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR -#define CONFIG_STEINHART_HART_3V3_30K9_47K_4050B -#define CONFIG_THROTTLE_AP - -/* USB */ -/* TODO: (b/143256147) Finish USB config */ -#undef CONFIG_USB_CHARGER -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USBC_PPC_SN5S330 -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_ANX7447 -#define CONFIG_USB_PD_TCPM_ANX7447_OCM_ERASE_COMMAND -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* USB Type A Features */ -/* TODO: (b/143190102) Finish USB A config */ - -/* I2C Bus Configuration */ -#define CONFIG_I2C -#define CONFIG_I2C_MASTER -#define I2C_PORT_INA NPCX_I2C_PORT0_0 -#define I2C_PORT_PPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC0 NPCX_I2C_PORT3_0 -#define I2C_PORT_POWER NPCX_I2C_PORT5_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -#define PP5000_PGOOD_POWER_SIGNAL_MASK POWER_SIGNAL_MASK(PP5000_A_PGOOD) - -#define CEC_GPIO_OUT GPIO_CEC_OUT -#define CEC_GPIO_IN GPIO_CEC_IN -#define CEC_GPIO_PULL_UP GPIO_CEC_PULL_UP - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum adc_channel { - ADC_SNS_PP3300, /* ADC2 */ - ADC_SNS_PP1050, /* ADC7 */ - ADC_VBUS, /* ADC4 */ - ADC_PPVAR_IMON, /* ADC9 */ - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - /* Number of ADC channels */ - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_FAN, - PWM_CH_LED_RED, - PWM_CH_LED_GREEN, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum fan_channel { - FAN_CH_0, - /* Number of FAN channels */ - FAN_CH_COUNT -}; - -enum mft_channel { - MFT_CH_0 = 0, - /* Number of MFT channels */ - MFT_CH_COUNT, -}; - -enum temp_sensor_id { - TEMP_SENSOR_PP3300, - TEMP_SENSOR_PP5000, - TEMP_SENSOR_COUNT -}; - - -/* Board specific handlers */ -void board_reset_pd_mcu(void); -void board_set_tcpc_power_mode(int port, int mode); -void led_alert(int enable); -void led_critical(void); - -#endif /* !__ASSEMBLER__ */ - -/* Pin renaming */ -#define GPIO_WP_L GPIO_EC_WP_ODL -#define GPIO_PP5000_A_PG_OD GPIO_PG_PP5000_A_OD -#define GPIO_EN_PP5000 GPIO_EN_PP5000_A -#define GPIO_RECOVERY_L GPIO_H1_EC_RECOVERY_BTN_ODL -#define GPIO_POWER_BUTTON_L GPIO_H1_EC_PWR_BTN_ODL -#define GPIO_PCH_WAKE_L GPIO_EC_PCH_WAKE_ODL -#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL -#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_L -#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL -#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST -#define GPIO_PCH_SYS_PWROK GPIO_EC_PCH_SYS_PWROK -#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S4_L GPIO_SLP_S4_L -/* No equivalent signals for these pins, need to refactor the power handling */ -#define GPIO_RSMRST_L_PGOOD GPIO_PG_VPRIM_CORE_A_OD -#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_PG_VPRIM_CORE_A_OD -#define GPIO_EN_A_RAILS GPIO_EN_ROA_RAILS -#define GPIO_AC_PRESENT GPIO_BJ_ADP_PRESENT_L - -#endif /* __CROS_EC_BOARD_H */ |