diff options
Diffstat (limited to 'board/rammus/board.h')
| -rw-r--r-- | board/rammus/board.h | 110 |
1 files changed, 53 insertions, 57 deletions
diff --git a/board/rammus/board.h b/board/rammus/board.h index e044148401..77515a40ba 100644 --- a/board/rammus/board.h +++ b/board/rammus/board.h @@ -1,4 +1,4 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. +/* Copyright 2018 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -12,7 +12,7 @@ * By default, enable all console messages excepted HC, ACPI and event: * The sensor stack is generating a lot of activity. */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) +#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) #undef CONFIG_HOSTCMD_DEBUG_MODE #define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF @@ -29,7 +29,7 @@ #define CONFIG_I2C #define CONFIG_I2C_CONTROLLER #define CONFIG_KEYBOARD_COL2_INVERTED -#undef CONFIG_KEYBOARD_VIVALDI +#undef CONFIG_KEYBOARD_VIVALDI #define CONFIG_KEYBOARD_PROTOCOL_8042 #define CONFIG_LED_COMMON #define CONFIG_LID_SWITCH @@ -67,8 +67,8 @@ #define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET #define CONFIG_CHIPSET_RESET_HOOK #define CONFIG_HOST_INTERFACE_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S3 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S4 #define CONFIG_HOSTCMD_FLASH_SPI_INFO /* Battery */ @@ -92,8 +92,8 @@ #define CONFIG_CMD_CHARGER_ADC_AMON_BMON #define CONFIG_HOSTCMD_PD_CONTROL #define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 +#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 #define CONFIG_POWER_BUTTON #define CONFIG_POWER_BUTTON_X86 #define CONFIG_POWER_COMMON @@ -140,7 +140,7 @@ /* Depends on how fast the AP boots and typical ODRs */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#undef CONFIG_UART_TX_BUF_SIZE +#undef CONFIG_UART_TX_BUF_SIZE #define CONFIG_UART_TX_BUF_SIZE 1024 #define CONFIG_TABLET_MODE @@ -181,45 +181,45 @@ #define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 /* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 as TACH */ +#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ +#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ +#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 as TACH */ /* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 -#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 -#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT1 -#define I2C_PORT_CHARGER NPCX_I2C_PORT1 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_MP2949 NPCX_I2C_PORT2 -#define I2C_PORT_GYRO NPCX_I2C_PORT3 -#define I2C_PORT_ACCEL I2C_PORT_GYRO -#define I2C_PORT_THERMAL I2C_PORT_PMIC +#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 +#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 +#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 +#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT1 +#define I2C_PORT_CHARGER NPCX_I2C_PORT1 +#define I2C_PORT_EEPROM NPCX_I2C_PORT0_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT1 +#define I2C_PORT_PMIC NPCX_I2C_PORT2 +#define I2C_PORT_MP2949 NPCX_I2C_PORT2 +#define I2C_PORT_GYRO NPCX_I2C_PORT3 +#define I2C_PORT_ACCEL I2C_PORT_GYRO +#define I2C_PORT_THERMAL I2C_PORT_PMIC /* I2C addresses */ -#define I2C_ADDR_BD99992_FLAGS 0x30 -#define I2C_ADDR_MP2949_FLAGS 0x20 -#define I2C_ADDR_EEPROM_FLAGS 0x50 +#define I2C_ADDR_BD99992_FLAGS 0x30 +#define I2C_ADDR_MP2949_FLAGS 0x20 +#define I2C_ADDR_EEPROM_FLAGS 0x50 /* Rename GPIOs */ -#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L -#define GPIO_PCH_SLP_SUS_L GPIO_SLP_SUS_L_PCH -#define GPIO_PG_EC_RSMRST_ODL GPIO_ROP_EC_RSMRST_L -#define GPIO_PMIC_DPWROK GPIO_ROP_DSW_PWROK -#define GPIO_POWER_BUTTON_L GPIO_PWR_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN -#define GPIO_AC_PRESENT GPIO_ROP_EC_ACOK -#define GPIO_ENABLE_BACKLIGHT GPIO_BL_DISABLE_L -#define GPIO_CPU_PROCHOT GPIO_PCH_PROCHOT -#define GPIO_PCH_PWRBTN_L GPIO_PCH_PWR_BTN_L -#define GPIO_EC_PLATFORM_RST GPIO_PLATFORM_RST -#define GPIO_PMIC_SLP_SUS_L GPIO_SLP_SUS_L_PMIC -#define GPIO_USB_C0_5V_EN GPIO_EN_USB_C0_5V_OUT -#define GPIO_USB_C1_5V_EN GPIO_EN_USB_C1_5V_OUT +#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L +#define GPIO_PCH_SLP_SUS_L GPIO_SLP_SUS_L_PCH +#define GPIO_PG_EC_RSMRST_ODL GPIO_ROP_EC_RSMRST_L +#define GPIO_PMIC_DPWROK GPIO_ROP_DSW_PWROK +#define GPIO_POWER_BUTTON_L GPIO_PWR_BTN_ODL +#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN +#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN +#define GPIO_AC_PRESENT GPIO_ROP_EC_ACOK +#define GPIO_ENABLE_BACKLIGHT GPIO_BL_DISABLE_L +#define GPIO_CPU_PROCHOT GPIO_PCH_PROCHOT +#define GPIO_PCH_PWRBTN_L GPIO_PCH_PWR_BTN_L +#define GPIO_EC_PLATFORM_RST GPIO_PLATFORM_RST +#define GPIO_PMIC_SLP_SUS_L GPIO_SLP_SUS_L_PMIC +#define GPIO_USB_C0_5V_EN GPIO_EN_USB_C0_5V_OUT +#define GPIO_USB_C1_5V_EN GPIO_EN_USB_C1_5V_OUT #ifndef __ASSEMBLER__ @@ -227,11 +227,11 @@ #include "registers.h" enum temp_sensor_id { - TEMP_SENSOR_BATTERY, /* Smart Battery Temperature */ - TEMP_SENSOR_AMBIENT, /* BD99992GW SYSTHERM0 */ - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ - TEMP_SENSOR_EMMC, /* BD99992GW SYSTHERM3 */ + TEMP_SENSOR_BATTERY, /* Smart Battery Temperature */ + TEMP_SENSOR_AMBIENT, /* BD99992GW SYSTHERM0 */ + TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ + TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ + TEMP_SENSOR_EMMC, /* BD99992GW SYSTHERM3 */ TEMP_SENSOR_COUNT }; @@ -248,11 +248,7 @@ enum sensor_id { SENSOR_COUNT, }; -enum adc_channel { - ADC_VBUS, - ADC_AMON_BMON, - ADC_CH_COUNT -}; +enum adc_channel { ADC_VBUS, ADC_AMON_BMON, ADC_CH_COUNT }; enum pwm_channel { PWM_CH_KBLIGHT, @@ -265,16 +261,16 @@ enum pwm_channel { * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ /* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_OPERATING_POWER_MW 15000 +#define PD_MAX_POWER_MW 45000 +#define PD_MAX_CURRENT_MA 3000 +#define PD_MAX_VOLTAGE_MV 20000 /* Board specific handlers */ void board_reset_pd_mcu(void); |