diff options
Diffstat (limited to 'board/rammus/board.h')
| -rw-r--r-- | board/rammus/board.h | 282 |
1 files changed, 0 insertions, 282 deletions
diff --git a/board/rammus/board.h b/board/rammus/board.h deleted file mode 100644 index dc2ae71de8..0000000000 --- a/board/rammus/board.h +++ /dev/null @@ -1,282 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Rammus board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* EC */ -#define CONFIG_ADC -#define CONFIG_BACKLIGHT_LID -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_BOARD_FORCE_RESET_PIN -#define CONFIG_CRC8 -#define CONFIG_CBI_EEPROM -#define CONFIG_DPTF -#define CONFIG_FLASH_SIZE_BYTES 0x80000 -#define CONFIG_FPU -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_KEYBOARD_COL2_INVERTED -#undef CONFIG_KEYBOARD_VIVALDI -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_LED_COMMON -#define CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LTO -#define CONFIG_CHIP_PANIC_BACKUP -#define CONFIG_PWM -#define CONFIG_PWM_KBLIGHT -#define CONFIG_SOFTWARE_PANIC -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25X40 -#define CONFIG_VBOOT_HASH -#define CONFIG_SHA256_UNROLLED -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 -#define CONFIG_WATCHDOG_HELP -#define CONFIG_WIRELESS -#define CONFIG_WIRELESS_SUSPEND \ - (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) -#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L -#define WIRELESS_GPIO_WLAN_POWER GPIO_EN_PP3300_DX_WLAN - -/* EC console commands */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_CMD_BUTTON - -/* Port80 */ -#undef CONFIG_PORT80_HISTORY_LEN -#define CONFIG_PORT80_HISTORY_LEN 256 - -/* SOC */ -#define CONFIG_CHIPSET_SKYLAKE -#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -#define CONFIG_HOSTCMD_FLASH_SPI_INFO - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" -#define CONFIG_BATTERY_SMART -#define CONFIG_BATTERY_LEVEL_NEAR_FULL 94 - -/* Charger */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGE_RAMP_HW /* This, or just RAMP? */ - -#define CONFIG_CHARGER -#define CONFIG_CHARGER_ISL9238 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* USB-A config */ -#define CONFIG_USB_PORT_POWER_SMART -#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY -#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP -#define CONFIG_USB_PORT_POWER_SMART_INVERTED -#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT -#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1 -#define GPIO_USB1_ILIM_SEL GPIO_USB_A_CHARGE_EN_L - -/* Sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_BD99992GW -#define CONFIG_THERMISTOR_NCP15WB - -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_ACCELGYRO_BMI160 -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCELGYRO_ICM426XX -#define CONFIG_ACCELGYRO_ICM426XX_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCELGYRO_BMI160_INT2_OUTPUT -#define CONFIG_ACCEL_BMA255 -#define CONFIG_ACCEL_KX022 -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL -#define CONFIG_LID_ANGLE_UPDATE - -#undef CONFIG_SENSOR_TIGHT_TIMESTAMPS - -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is in power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 512 -/* Depends on how fast the AP boots and typical ODRs */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 1024 - -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH -#define CONFIG_GMR_TABLET_MODE -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE - -/* USB */ -#define CONFIG_USB_CHARGER -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_VBUS_DETECT_GPIO -#define CONFIG_USB_PD_TCPC_LOW_POWER -/* TODO(b:121222079): Remove the config before FSI */ -#define CONFIG_USB_PD_TCPC_RUNTIME_CONFIG -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_ANX7447 -#define CONFIG_USB_PD_TCPM_ANX7447_OCM_ERASE_COMMAND -#define CONFIG_USB_PD_TCPM_PS8751 -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* BC 1.2 charger */ -#define CONFIG_BC12_DETECT_PI3USB9281 -#define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 - -/* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 as TACH */ - -/* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 -#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 -#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT1 -#define I2C_PORT_CHARGER NPCX_I2C_PORT1 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_MP2949 NPCX_I2C_PORT2 -#define I2C_PORT_GYRO NPCX_I2C_PORT3 -#define I2C_PORT_ACCEL I2C_PORT_GYRO -#define I2C_PORT_THERMAL I2C_PORT_PMIC - -/* I2C addresses */ -#define I2C_ADDR_BD99992_FLAGS 0x30 -#define I2C_ADDR_MP2949_FLAGS 0x20 -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -/* Rename GPIOs */ -#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L -#define GPIO_PCH_SLP_SUS_L GPIO_SLP_SUS_L_PCH -#define GPIO_RSMRST_L_PGOOD GPIO_ROP_EC_RSMRST_L -#define GPIO_PMIC_DPWROK GPIO_ROP_DSW_PWROK -#define GPIO_POWER_BUTTON_L GPIO_PWR_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN -#define GPIO_AC_PRESENT GPIO_ROP_EC_ACOK -#define GPIO_ENABLE_BACKLIGHT GPIO_BL_DISABLE_L -#define GPIO_CPU_PROCHOT GPIO_PCH_PROCHOT -#define GPIO_PCH_PWRBTN_L GPIO_PCH_PWR_BTN_L -#define GPIO_EC_PLATFORM_RST GPIO_PLATFORM_RST -#define GPIO_PMIC_SLP_SUS_L GPIO_SLP_SUS_L_PMIC -#define GPIO_USB_C0_5V_EN GPIO_EN_USB_C0_5V_OUT -#define GPIO_USB_C1_5V_EN GPIO_EN_USB_C1_5V_OUT - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum temp_sensor_id { - TEMP_SENSOR_BATTERY, /* Smart Battery Temperature */ - TEMP_SENSOR_AMBIENT, /* BD99992GW SYSTHERM0 */ - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ - TEMP_SENSOR_EMMC, /* BD99992GW SYSTHERM3 */ - TEMP_SENSOR_COUNT -}; - -/* - * Motion sensors: - * When reading through IO memory is set up for sensors (LPC is used), - * the first 2 entries must be accelerometers, then gyroscope. - * For BMI160, accel, gyro and compass sensors must be next to each other. - */ -enum sensor_id { - LID_ACCEL = 0, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT, -}; - -enum adc_channel { - ADC_VBUS, - ADC_AMON_BMON, - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_KBLIGHT, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -/* TODO(crosbug.com/p/61098): Verify the numbers below. */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Board specific handlers */ -void board_reset_pd_mcu(void); -void board_set_tcpc_power_mode(int port, int mode); -void motion_interrupt(enum gpio_signal signal); - -/* Sensors without hardware FIFO are in forced mode */ -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |