diff options
Diffstat (limited to 'board/reef_it8320/board.h')
| -rw-r--r-- | board/reef_it8320/board.h | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/board/reef_it8320/board.h b/board/reef_it8320/board.h deleted file mode 100644 index 510aff4792..0000000000 --- a/board/reef_it8320/board.h +++ /dev/null @@ -1,219 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* reef_it8320 board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * Enable PD in RO image for TCPMv2, otherwise there is only Type-c functions. - * NOTE: This configuration is only for development board and will never be - * released on a chrome os device. - */ -#define CONFIG_SYSTEM_UNLOCKED - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -/* EC console commands */ -#define CONFIG_CMD_BATT_MFG_ACCESS -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -#define BD9995X_IOUT_GAIN_SELECT \ - BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_GAIN_SET_20V - -#define CONFIG_CHARGER_PSYS_READ -#define BD9995X_PSYS_GAIN_SELECT \ - BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_GAIN_SET_02UAW - -/* Battery */ -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_CUSTOM -#define CONFIG_BATTERY_SMART - -/* Charger */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGE_RAMP_SW -#define CONFIG_CHARGER -#define CONFIG_CHARGER_BD9995X -#define CONFIG_CHARGER_BD9995X_CHGEN -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 1 -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 18000 -#define CONFIG_CHARGER_MAINTAIN_VBAT -#undef CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON -#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 1 -#define CONFIG_USB_CHARGER -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_CHARGER_PROFILE_OVERRIDE_COMMON -#undef CONFIG_CHARGER_PROFILE_VOLTAGE_RANGES -#define CONFIG_CHARGER_PROFILE_VOLTAGE_RANGES 3 -#define CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT - -/* USB-A config */ -#define CONFIG_USB_PORT_POWER_SMART -#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP -#define CONFIG_USB_PORT_POWER_SMART_SIMPLE -#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT -#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1 -#define GPIO_USB1_ILIM_SEL GPIO_USB_A_CHARGE_EN_L -#define GPIO_USB_CTL1 GPIO_EN_PP5000 - -/* USB PD config */ -#define CONFIG_USB_MUX_PI3USB30532 -#define CONFIG_USB_MUX_PS8740 -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DISCHARGE_GPIO -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2 -#define CONFIG_USB_PD_VBUS_DETECT_CHARGER -#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PID 0x1234 /* Invalid PID for development board */ -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_PD_DEBUG_LEVEL 2 -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* SoC / PCH */ -#define CONFIG_HOSTCMD_LPC -#define CONFIG_CHIPSET_APOLLOLAKE -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* EC */ -#define CONFIG_ADC -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_IT83XX_VCC_3P3V - -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_LED_COMMON -#define CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LTO -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_TABLET_MODE -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR_NCP15WB -#define CONFIG_STEINHART_HART_3V3_13K7_47K_4050B -#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B -#define CONFIG_DPTF -#define CONFIG_SCI_GPIO GPIO_PCH_SCI_L -#define CONFIG_VBOOT_HASH -#define CONFIG_VOLUME_BUTTONS -#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL -#define CONFIG_BACKLIGHT_LID -#define CONFIG_WIRELESS -#define CONFIG_WIRELESS_SUSPEND EC_WIRELESS_SWITCH_WLAN_POWER -#define CONFIG_WLAN_POWER_ACTIVE_LOW -#define WIRELESS_GPIO_WLAN_POWER GPIO_WIRELESS_GPIO_WLAN_POWER -#define CONFIG_PWR_STATE_DISCHARGE_FULL -#undef CONFIG_KEYBOARD_VIVALDI - -/* - * Enable 1 slot of secure temporary storage to support - * suspend/resume with read/write memory training. - */ -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 -#undef CONFIG_UART_RX_BUF_SIZE -#define CONFIG_UART_RX_BUF_SIZE 512 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -/* I2C ports */ -#define I2C_PORT_USB_MUX IT83XX_I2C_CH_C -#define I2C_PORT_BATTERY IT83XX_I2C_CH_E -#define I2C_PORT_CHARGER IT83XX_I2C_CH_E - -/* ADC signal */ -enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, /* ADC CH1 */ - ADC_TEMP_SENSOR_AMB, /* ADC CH2 */ - ADC_BOARD_ID, /* ADC CH3 */ - ADC_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_BATTERY = 0, - TEMP_SENSOR_AMBIENT, - TEMP_SENSOR_CHARGER, - TEMP_SENSOR_COUNT -}; - -enum reef_it8320_board_version { - BOARD_VERSION_UNKNOWN = -1, - BOARD_VERSION_1, - BOARD_VERSION_2, - BOARD_VERSION_3, - BOARD_VERSION_4, - BOARD_VERSION_5, - BOARD_VERSION_6, - BOARD_VERSION_7, - BOARD_VERSION_8, - BOARD_VERSION_COUNT, -}; - -/* TODO: determine the following board specific type-C power constants */ -/* FIXME(dhendrix): verify all of the below PD_* numbers */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Reset PD MCU */ -void board_reset_pd_mcu(void); -int board_get_version(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |