diff options
Diffstat (limited to 'board/reef_mchp/board.h')
| -rw-r--r-- | board/reef_mchp/board.h | 63 |
1 files changed, 31 insertions, 32 deletions
diff --git a/board/reef_mchp/board.h b/board/reef_mchp/board.h index ad98fac829..bde2d831d3 100644 --- a/board/reef_mchp/board.h +++ b/board/reef_mchp/board.h @@ -1,4 +1,4 @@ -/* Copyright 2016 The Chromium OS Authors. All rights reserved. +/* Copyright 2016 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -12,7 +12,7 @@ * By default, enable all console messages excepted HC, ACPI and event: * The sensor stack is generating a lot of activity. */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) +#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) #undef CONFIG_HOSTCMD_DEBUG_MODE #define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF @@ -24,14 +24,14 @@ #define CONFIG_CMD_ACCEL_INFO #define CONFIG_CMD_BATT_MFG_ACCESS #define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 +#define CONFIG_CHARGER_SENSE_RESISTOR 10 +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #define BD9995X_IOUT_GAIN_SELECT \ - BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_GAIN_SET_20V + BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_GAIN_SET_20V #define CONFIG_CHARGER_PSYS_READ #define BD9995X_PSYS_GAIN_SELECT \ - BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_GAIN_SET_02UAW + BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_GAIN_SET_02UAW #define CONFIG_CMD_I2C_STRESS_TEST #define CONFIG_CMD_I2C_STRESS_TEST_ACCEL @@ -41,7 +41,7 @@ #define CONFIG_CMD_I2C_STRESS_TEST_TCPC /* Battery */ -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" +#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" #define CONFIG_BATTERY_CUT_OFF #define CONFIG_BATTERY_PRESENT_CUSTOM #define CONFIG_BATTERY_SMART @@ -62,7 +62,7 @@ #define CONFIG_USB_CHARGER #define CONFIG_CHARGER_PROFILE_OVERRIDE #define CONFIG_CHARGER_PROFILE_OVERRIDE_COMMON -#undef CONFIG_CHARGER_PROFILE_VOLTAGE_RANGES +#undef CONFIG_CHARGER_PROFILE_VOLTAGE_RANGES #define CONFIG_CHARGER_PROFILE_VOLTAGE_RANGES 3 #define CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT @@ -89,7 +89,7 @@ #define CONFIG_USB_PD_PORT_MAX_COUNT 2 #define CONFIG_USB_PD_VBUS_DETECT_CHARGER #define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX /* for both PS8751 and ANX3429 */ +#define CONFIG_USB_PD_TCPM_MUX /* for both PS8751 and ANX3429 */ #define CONFIG_USB_PD_TCPM_ANX3429 /* Silicon on Reef is ANX3429 */ #define CONFIG_USB_PD_TCPM_PS8751 #define CONFIG_USB_PD_TCPM_TCPCI @@ -117,8 +117,8 @@ /* EC */ #define CONFIG_ADC #define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 +#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 #define CONFIG_FPU #define CONFIG_HOSTCMD_FLASH_SPI_INFO #define CONFIG_I2C @@ -145,7 +145,7 @@ #define CONFIG_WIRELESS #define CONFIG_WIRELESS_SUSPEND EC_WIRELESS_SWITCH_WLAN_POWER #define CONFIG_WLAN_POWER_ACTIVE_LOW -#define WIRELESS_GPIO_WLAN_POWER GPIO_WIRELESS_GPIO_WLAN_POWER +#define WIRELESS_GPIO_WLAN_POWER GPIO_WIRELESS_GPIO_WLAN_POWER #define CONFIG_PWR_STATE_DISCHARGE_FULL /* @@ -171,7 +171,7 @@ #define CONFIG_FLASH_SIZE_BYTES 524288 #define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q40 /* FIXME: Should be GD25LQ40? */ +#define CONFIG_SPI_FLASH_W25Q40 /* FIXME: Should be GD25LQ40? */ /* * Enable 1 slot of secure temporary storage to support @@ -186,17 +186,17 @@ #define CONFIG_BOARD_PRE_INIT /* I2C ports */ -#define I2C_CONTROLLER_COUNT 4 -#define I2C_PORT_COUNT 5 - -#define I2C_PORT_GYRO MCHP_I2C_PORT6 -#define I2C_PORT_LID_ACCEL MCHP_I2C_PORT7 -#define I2C_PORT_ALS MCHP_I2C_PORT7 -#define I2C_PORT_BARO MCHP_I2C_PORT7 -#define I2C_PORT_BATTERY MCHP_I2C_PORT3 -#define I2C_PORT_CHARGER MCHP_I2C_PORT3 +#define I2C_CONTROLLER_COUNT 4 +#define I2C_PORT_COUNT 5 + +#define I2C_PORT_GYRO MCHP_I2C_PORT6 +#define I2C_PORT_LID_ACCEL MCHP_I2C_PORT7 +#define I2C_PORT_ALS MCHP_I2C_PORT7 +#define I2C_PORT_BARO MCHP_I2C_PORT7 +#define I2C_PORT_BATTERY MCHP_I2C_PORT3 +#define I2C_PORT_CHARGER MCHP_I2C_PORT3 /* Accelerometer and Gyroscope are the same device. */ -#define I2C_PORT_ACCEL I2C_PORT_GYRO +#define I2C_PORT_ACCEL I2C_PORT_GYRO /* Sensors */ #define CONFIG_MKBP_EVENT @@ -222,7 +222,6 @@ /* Depends on how fast the AP boots and typical ODRs */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - #ifndef __ASSEMBLER__ #include "gpio_signal.h" @@ -230,9 +229,9 @@ /* ADC signal */ enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, /* ADC0 */ - ADC_TEMP_SENSOR_AMB, /* ADC1 */ - ADC_BOARD_ID, /* ADC2 */ + ADC_TEMP_SENSOR_CHARGER, /* ADC0 */ + ADC_TEMP_SENSOR_AMB, /* ADC1 */ + ADC_BOARD_ID, /* ADC2 */ ADC_CH_COUNT }; @@ -271,7 +270,7 @@ enum sensor_id { BASE_GYRO, BASE_MAG, BASE_BARO, - LID_ALS, /* firmware-reef-9042.B doesn't have this */ + LID_ALS, /* firmware-reef-9042.B doesn't have this */ SENSOR_COUNT, }; @@ -294,16 +293,16 @@ enum reef_board_version { * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ #define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ /* Define typical operating power and max power */ #define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_MAX_POWER_MW 45000 +#define PD_MAX_CURRENT_MA 3000 +#define PD_MAX_VOLTAGE_MV 20000 /* Reset PD MCU */ void board_reset_pd_mcu(void); |