diff options
Diffstat (limited to 'board/sasuke/board.h')
| -rw-r--r-- | board/sasuke/board.h | 46 |
1 files changed, 22 insertions, 24 deletions
diff --git a/board/sasuke/board.h b/board/sasuke/board.h index 4d70cda5ab..64c830df0f 100644 --- a/board/sasuke/board.h +++ b/board/sasuke/board.h @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -23,13 +23,16 @@ /* Charger */ #define CONFIG_CHARGER_RAA489000 +#define PD_MAX_VOLTAGE_MV 20000 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ +#define CONFIG_OCPC_DEF_RBATT_MOHMS \ + 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr \ + */ #define CONFIG_OCPC #define CONFIG_CHARGER_PROFILE_OVERRIDE #define CONFIG_CHARGE_RAMP_HW -#undef CONFIG_CHARGER_SINGLE_CHIP +#undef CONFIG_CHARGER_SINGLE_CHIP #define CONFIG_BATTERY_CHECK_CHARGE_TEMP_LIMITS @@ -50,9 +53,8 @@ #define GPIO_BAT_LED_GREEN_L GPIO_LED_G_ODL #define GPIO_PWR_LED_BLUE_L GPIO_LED_B_ODL - /* PWM */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ +#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ /* Thermistors */ #define CONFIG_TEMP_SENSOR @@ -85,10 +87,10 @@ #undef PD_POWER_SUPPLY_TURN_OFF_DELAY #undef CONFIG_USBC_VCONN_SWAP_DELAY_US /* 20% margin added for these timings */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 13080 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 16080 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 13080 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 16080 /* us */ #undef CONFIG_USBC_VCONN_SWAP_DELAY_US -#define CONFIG_USBC_VCONN_SWAP_DELAY_US 787 /* us */ +#define CONFIG_USBC_VCONN_SWAP_DELAY_US 787 /* us */ /* USB Type A Features */ #define USB_PORT_COUNT 1 @@ -101,16 +103,16 @@ #define GPIO_USB1_ILIM_SEL GPIO_EN_USB_A0_5V_SUB /* I2C configuration */ -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 +#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 #define I2C_PORT_SUB_USB_C1 NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 +#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* TODO(b:147440290): Need to handle multiple charger ICs */ -#define I2C_PORT_CHARGER I2C_PORT_USB_C0 +#define I2C_PORT_CHARGER I2C_PORT_USB_C0 -#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_ACCEL I2C_PORT_SENSOR #define I2C_ADDR_EEPROM_FLAGS 0x50 /* 7b address */ @@ -142,17 +144,13 @@ enum chg_id { CHARGER_NUM, }; -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_COUNT -}; +enum temp_sensor_id { TEMP_SENSOR_1, TEMP_SENSOR_2, TEMP_SENSOR_COUNT }; enum adc_channel { - ADC_TEMP_SENSOR_1, /* ADC0 */ - ADC_TEMP_SENSOR_2, /* ADC1 */ - ADC_SUB_ANALOG, /* ADC2 */ - ADC_VSNS_PP3300_A, /* ADC9 */ + ADC_TEMP_SENSOR_1, /* ADC0 */ + ADC_TEMP_SENSOR_2, /* ADC1 */ + ADC_SUB_ANALOG, /* ADC2 */ + ADC_VSNS_PP3300_A, /* ADC9 */ ADC_CH_COUNT }; |