1 files changed, 0 insertions, 95 deletions
diff --git a/board/sasukette/board.h b/board/sasukette/board.h
deleted file mode 100644
index a1d987aaf3..0000000000
--- a/board/sasukette/board.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Sasukette board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Select Baseboard features */
-#define VARIANT_DEDEDE_EC_IT8320
-#include "baseboard.h"
-#undef GPIO_VOLUME_UP_L
-#undef GPIO_VOLUME_DOWN_L
-#undef CONFIG_VOLUME_BUTTONS
-#undef CONFIG_I2C_DEBUG
-
-/* EC console commands */
-#define CONFIG_CMD_TCPC_DUMP
-#define CONFIG_CMD_CHARGER_DUMP
-
-/* Battery */
-#define CONFIG_BATTERY_FUEL_GAUGE
-#define CONFIG_BATTERY_CHECK_CHARGE_TEMP_LIMITS
-
-/* BC 1.2 */
-#define CONFIG_BC12_DETECT_PI3USB9201
-
-/* Charger */
-#define CONFIG_CHARGER_RAA489000
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
-#define CONFIG_CHARGER_SENSE_RESISTOR 10
-#define CONFIG_CHARGER_SINGLE_CHIP
-#define CONFIG_CHARGER_PROFILE_OVERRIDE
-#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE
-#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC)
-
-/* LED */
-#define CONFIG_LED_COMMON
-#define CONFIG_LED_ONOFF_STATES
-#define GPIO_BAT_LED_RED_L GPIO_LED_R_ODL
-#define GPIO_BAT_LED_GREEN_L GPIO_LED_G_ODL
-#define GPIO_PWR_LED_BLUE_L GPIO_LED_B_ODL
-
-/* TCPC */
-#define CONFIG_USB_PD_PORT_MAX_COUNT 1
-#define CONFIG_USB_PD_TCPM_RAA489000
-
-/* USB defines specific to external TCPCs */
-#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
-#define CONFIG_USB_PD_VBUS_DETECT_TCPC
-#define CONFIG_USB_PD_DISCHARGE_TCPC
-#define CONFIG_USB_PD_TCPC_LOW_POWER
-#define CONFIG_USB_PD_5V_EN_CUSTOM
-
-/* Thermistors */
-#define CONFIG_TEMP_SENSOR
-#define CONFIG_THERMISTOR
-#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
-
-/* USB Mux and Retimer */
-#define CONFIG_USB_MUX_IT5205			/* C1: ITE Mux */
-#define I2C_PORT_USB_MUX I2C_PORT_USB_C0	/* Required for ITE Mux */
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-/* ADC channels */
-enum adc_channel {
-	ADC_VSNS_PP3300_A,     /* ADC0 */
-	ADC_TEMP_SENSOR_1,     /* ADC2 */
-	ADC_TEMP_SENSOR_2,     /* ADC3 */
-	ADC_TEMP_SENSOR_3,     /* ADC15*/
-	ADC_CH_COUNT
-};
-
-enum temp_sensor_id {
-	TEMP_SENSOR_1,
-	TEMP_SENSOR_2,
-	TEMP_SENSOR_3,
-	TEMP_SENSOR_COUNT
-};
-
-/* List of possible batteries */
-enum battery_type {
-	BATTERY_SDI,
-	BATTERY_TYPE_COUNT,
-};
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */