diff options
Diffstat (limited to 'board/scarlet/board.h')
| -rw-r--r-- | board/scarlet/board.h | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/board/scarlet/board.h b/board/scarlet/board.h deleted file mode 100644 index 2880968ddc..0000000000 --- a/board/scarlet/board.h +++ /dev/null @@ -1,229 +0,0 @@ -/* Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Configuration for Scarlet */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Free up flash space */ -#define CONFIG_DEBUG_ASSERT_BRIEF -#define CONFIG_USB_PD_DEBUG_LEVEL 0 - -/* Optional modules */ -#define CONFIG_ADC -#undef CONFIG_ADC_WATCHDOG -#define CONFIG_CHIPSET_RK3399 -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_RTC -#define CONFIG_EMULATED_SYSRQ -#undef CONFIG_HIBERNATE -#define CONFIG_HOSTCMD_RTC -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_VIRTUAL_BATTERY -#define CONFIG_I2C_PASSTHRU_RESTRICTED -#define CONFIG_LED_COMMON -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LOW_POWER_IDLE_LIMITED -#define CONFIG_POWER_COMMON -#define CONFIG_SPI -#define CONFIG_SPI_CONTROLLER -#define CONFIG_STM_HWTIMER32 -/* Source RTCCLK from external 32.768kHz source on PC15/OSC32_IN. */ -#define CONFIG_STM32_CLOCK_LSE -#define CONFIG_SWITCH -#define CONFIG_WATCHDOG_HELP - -#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands for testing */ - -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 1 -#define CONFIG_UART_RX_DMA - -/* Enable a different power-on sequence than the one on gru */ -#undef CONFIG_CHIPSET_POWER_SEQ_VERSION -#define CONFIG_CHIPSET_POWER_SEQ_VERSION 1 - -/* Optional features */ -#define CONFIG_BOARD_PRE_INIT -#define CONFIG_BUTTON_TRIGGERED_RECOVERY -#define CONFIG_CHARGER_ILIM_PIN_DISABLED -#define CONFIG_FORCE_CONSOLE_RESUME -#define CONFIG_HOST_COMMAND_STATUS - -/* Required for FAFT */ -#define CONFIG_CMD_BUTTON - -/* By default, set hcdebug to off */ -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF -#undef CONFIG_LID_SWITCH -#undef CONFIG_LTO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_IGNORE_LID -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_SOFTWARE_PANIC -#define CONFIG_VBOOT_HASH -#define CONFIG_VOLUME_BUTTONS - -#define CONFIG_CHARGER -#define CONFIG_CHARGER_RT9467 -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 2 -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 15000 -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_OTG -#define CONFIG_USB_CHARGER -#define CONFIG_USB_MUX_VIRTUAL - -/* Increase tx buffer size, as we'd like to stream EC log to AP. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Motion Sensors */ -#define CONFIG_ACCELGYRO_BMI160 -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(LID_ACCEL) - -/* Camera VSYNC */ -#define CONFIG_SYNC -#define CONFIG_SYNC_COMMAND -#define CONFIG_SYNC_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC) - -/* To be able to indicate the device is in tablet mode. */ -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH - -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is in power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs. */ -#define CONFIG_ACCEL_FIFO_THRES 10 - -/* USB PD config */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DISCHARGE_GPIO -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPM_FUSB302 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_5V_CHARGER_CTRL -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_PD_COMM_LOCKED - -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_CUSTOM -#define CONFIG_BATTERY_RETRY_NACK -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_MAX17055 - -/* Battery parameters for max17055 ModelGauge m5 algorithm. */ -#define BATTERY_MAX17055_RSENSE 5 /* m-ohm */ -#define BATTERY_DESIRED_CHARGING_CURRENT 4000 /* mA */ - -#define CONFIG_THROTTLE_AP_ON_BAT_DISCHG_CURRENT -#define BAT_MAX_DISCHG_CURRENT 5000 /* mA */ - -#define CONFIG_THROTTLE_AP_ON_BAT_VOLTAGE -#define BAT_LOW_VOLTAGE_THRESH 3200 /* mV */ - -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 12850 - -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 50000 /* us */ - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_WATCHDOG 7 - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* Optional for testing */ -#undef CONFIG_PECI -#undef CONFIG_PSTORE - -/* Modules we want to exclude */ -#undef CONFIG_CMD_BATTFAKE -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_HASH -#undef CONFIG_CMD_I2C_SCAN -#undef CONFIG_CMD_MD -#undef CONFIG_CMD_POWERINDEBUG -#undef CONFIG_CMD_TIMERINFO - -#define CONFIG_TASK_PROFILING - -#define I2C_PORT_CHARGER 0 -#define I2C_PORT_BATTERY 0 -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define I2C_PORT_TCPC0 1 - -/* Route sbs host requests to virtual battery driver */ -#define VIRTUAL_BATTERY_ADDR_FLAGS 0x0B - -/* Enable Accel over SPI */ -#define CONFIG_SPI_ACCEL_PORT 0 /* The first SPI master port (SPI2) */ - -#define CONFIG_MKBP_INPUT_DEVICES -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -/* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_RTC)) - -#ifndef __ASSEMBLER__ - -enum adc_channel { - /* Real ADC channels begin here */ - ADC_BOARD_ID = 0, - ADC_CH_COUNT -}; - -/* power signal definitions */ -enum power_signal { - PP1250_S3_PWR_GOOD = 0, - PP900_S0_PWR_GOOD, - AP_PWR_GOOD, - SUSPEND_DEASSERTED, - - /* Number of signals */ - POWER_SIGNAL_COUNT, -}; - -/* Motion sensors */ -enum sensor_id { - LID_ACCEL = 0, - LID_GYRO, - VSYNC, - SENSOR_COUNT, -}; - -#include "gpio_signal.h" -#include "registers.h" - -void board_reset_pd_mcu(void); -int board_get_version(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |