diff options
Diffstat (limited to 'board/servo_v4/gpio.inc')
| -rw-r--r-- | board/servo_v4/gpio.inc | 81 |
1 files changed, 0 insertions, 81 deletions
diff --git a/board/servo_v4/gpio.inc b/board/servo_v4/gpio.inc deleted file mode 100644 index 76b9a06d0f..0000000000 --- a/board/servo_v4/gpio.inc +++ /dev/null @@ -1,81 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -GPIO_INT(USB_DET_PP_CHG, PIN(C, 13), GPIO_INT_BOTH, vbus0_evt) -GPIO_INT(USB_DET_PP_DUT, PIN(C, 12), GPIO_INT_BOTH, vbus1_evt) -GPIO_INT(DP_HPD, PIN(A, 14), GPIO_INT_BOTH, hpd_evt) - -/* Outputs */ -GPIO(DUT_CHG_EN, PIN(A, 10), GPIO_OUT_LOW) -GPIO(HOST_OR_CHG_CTL, PIN(A, 13), GPIO_OUT_HIGH) -GPIO(SBU_UART_SEL, PIN(A, 15), GPIO_OUT_LOW) -GPIO(HOST_USB_HUB_RESET_L, PIN(D, 2), GPIO_OUT_HIGH) -GPIO(FASTBOOT_DUTHUB_MUX_SEL, PIN(B, 5), GPIO_OUT_HIGH) -GPIO(SBU_MUX_EN, PIN(B, 6), GPIO_OUT_LOW) -GPIO(FASTBOOT_DUTHUB_MUX_EN_L, PIN(B, 7), GPIO_OUT_LOW) -/* Power on init has reset asserted, we will pull the hub out of reset - * in the board init to help avoid brownout. - */ -GPIO(DUT_HUB_USB_RESET_L, PIN(B, 9), GPIO_OUT_LOW) -GPIO(ATMEL_HWB_L, PIN(B, 12), GPIO_OUT_HIGH) -GPIO(CMUX_EN, PIN(C, 14), GPIO_OUT_HIGH) -GPIO(EMMC_MUX_EN_L, PIN(F, 0), GPIO_OUT_HIGH) -GPIO(EMMC_PWR_EN, PIN(F, 1), GPIO_OUT_LOW) - -/* Inputs */ -GPIO(USERVO_FAULT_L, PIN(A, 8), GPIO_INPUT) -GPIO(USB_FAULT_L, PIN(A, 9), GPIO_INPUT) -GPIO(DONGLE_DET, PIN(C, 15), GPIO_INPUT) - -/* Type-C */ -/* PD RX/TX */ -GPIO(USB_C_REF, PIN(A, 1), GPIO_ANALOG) -GPIO(USB_CHG_CC1_PD, PIN(A, 2), GPIO_ANALOG) -GPIO(USB_CHG_CC2_PD, PIN(A, 4), GPIO_ANALOG) -GPIO(USB_DUT_CC1_PD, PIN(A, 0), GPIO_ANALOG) -GPIO(USB_DUT_CC2_PD, PIN(A, 5), GPIO_ANALOG) - -GPIO(USB_CHG_CC1_TX_DATA, PIN(B, 4), GPIO_INPUT) -GPIO(USB_CHG_CC2_TX_DATA, PIN(A, 6), GPIO_INPUT) -GPIO(USB_DUT_CC1_TX_DATA, PIN(B, 14), GPIO_INPUT) -GPIO(USB_DUT_CC2_TX_DATA, PIN(C, 2), GPIO_INPUT) - -GPIO(USB_DUT_CC1_RP3A0, PIN(C, 0), GPIO_INPUT) -GPIO(USB_DUT_CC1_RP1A5, PIN(C, 1), GPIO_INPUT) -GPIO(USB_DUT_CC1_RPUSB, PIN(C, 3), GPIO_INPUT) -GPIO(USB_DUT_CC1_RD, PIN(C, 6), GPIO_INPUT) -GPIO(USB_DUT_CC1_RA, PIN(C, 7), GPIO_INPUT) - -GPIO(USB_DUT_CC2_RP3A0, PIN(C, 8), GPIO_INPUT) -GPIO(USB_DUT_CC2_RP1A5, PIN(C, 9), GPIO_INPUT) -GPIO(USB_DUT_CC2_RPUSB, PIN(B, 0), GPIO_INPUT) -GPIO(USB_DUT_CC2_RD, PIN(B, 1), GPIO_INPUT) -GPIO(USB_DUT_CC2_RA, PIN(B, 2), GPIO_INPUT) - -/* Alternate PD functions */ -GPIO(USB_CHG_TX_CLKOUT, PIN(B, 8), GPIO_INPUT) -GPIO(USB_CHG_TX_CLKIN, PIN(B, 3), GPIO_INPUT) -GPIO(USB_DUT_TX_CLKOUT, PIN(B, 15), GPIO_INPUT) -GPIO(USB_DUT_TX_CLKIN, PIN(B, 13), GPIO_INPUT) - -/* I2C pins should be configured as inputs until I2C module is */ -/* initialized. This will avoid driving the lines unintentionally.*/ -GPIO(MASTER_I2C_SCL, PIN(B, 10), GPIO_INPUT) -GPIO(MASTER_I2C_SDA, PIN(B, 11), GPIO_INPUT) - -/* Unimplemented signals since we are not an EC */ -UNIMPLEMENTED(ENTERING_RW) -UNIMPLEMENTED(WP_L) - -ALTERNATE(PIN_MASK(C, 0x0030), 1, MODULE_USART, 0) /* USART3: PC4/PC5 - Servo DUT UART */ -ALTERNATE(PIN_MASK(C, 0x0C00), 0, MODULE_USART, 0) /* USART4: PC10/PC11 - Servo UART3 */ -ALTERNATE(PIN_MASK(B, 0x0C00), 1, MODULE_I2C, GPIO_ODR_HIGH) /* I2C MASTER:PB8/9 */ -ALTERNATE(PIN_MASK(B, 0x0008), 0, MODULE_USB_PD, 0) /* SPI1_SCK: PB3 */ -ALTERNATE(PIN_MASK(B, 0x2000), 0, MODULE_USB_PD, 0) /* SPI2_SCK: PB13 */ -ALTERNATE(PIN_MASK(B, 0x0100), 2, MODULE_USB_PD, 0) /* TIM16_CH1: PB8 */ -ALTERNATE(PIN_MASK(B, 0x8000), 1, MODULE_USB_PD, 0) /* TIM15_CH2: PB15 */ - |