1 files changed, 0 insertions, 80 deletions
diff --git a/board/servo_v4p1/chg_control.c b/board/servo_v4p1/chg_control.c
deleted file mode 100644
index 19be03a755..0000000000
--- a/board/servo_v4p1/chg_control.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "chg_control.h"
-#include "gpio.h"
-#include "ioexpanders.h"
-#include "registers.h"
-#include "timer.h"
-#include "usb_pd.h"
-
-#define CHG_P5V_POWER  0
-#define CHG_VBUS_POWER 1
-
-void chg_reset(void)
-{
-	/* Disconnect DUT Power */
-	chg_power_select(CHG_POWER_OFF);
-
-	/* Disconnect CHG CC1(Rd) and CC2(Rd) */
-	chg_attach_cc_rds(0);
-
-	/* Give time for CHG to detach, use tErrorRecovery. */
-	msleep(PD_T_ERROR_RECOVERY);
-
-	/* Connect CHG CC1(Rd) and CC2(Rd) to detect charger */
-	chg_attach_cc_rds(1);
-}
-
-void chg_power_select(enum chg_power_select_t type)
-{
-	switch (type) {
-	case CHG_POWER_OFF:
-		dut_chg_en(0);
-		vbus_dischrg_en(1);
-		break;
-	case CHG_POWER_PP5000:
-		vbus_dischrg_en(0);
-		host_or_chg_ctl(CHG_P5V_POWER);
-		dut_chg_en(1);
-		break;
-	case CHG_POWER_VBUS:
-		vbus_dischrg_en(0);
-		host_or_chg_ctl(CHG_VBUS_POWER);
-		dut_chg_en(1);
-		break;
-	}
-}
-
-void chg_attach_cc_rds(bool en)
-{
-	if (en) {
-		/*
-		 * Configure USB_CHG_CC1_MCU and USB_CHG_CC2_MCU as
-		 * ANALOG input
-		 */
-		STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
-			| (3 << (2*2)) | /* PA2 in ANALOG mode */
-			  (3 << (2*4))); /* PA4 in ANALOG mode */
-	} else {
-		/*
-		 * Configure USB_CHG_CC1_MCU and USB_CHG_CC2_MCU as GPIO and
-		 * drive high to trigger disconnect.
-		 * NOTE: The CC line has an external fixed Rd pull-down.
-		 * Driving the CC line High overrides the pull down and this
-		 * triggers a disconnection.
-		 */
-		/* Set level high */
-		gpio_set_level(GPIO_USB_CHG_CC1_MCU, 1);
-		gpio_set_level(GPIO_USB_CHG_CC2_MCU, 1);
-
-		/* Disable Analog mode and Enable GPO */
-		STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
-			& ~(3 << (2*2) | /* PA2 disable ADC */
-			    3 << (2*4))) /* PA4 disable ADC */
-			|  (1 << (2*2) | /* Set as GPO */
-			    1 << (2*4)); /* Set as GPO */
-	}
-}