diff options
Diffstat (limited to 'board/servo_v4p1/gpio.inc')
| -rw-r--r-- | board/servo_v4p1/gpio.inc | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/board/servo_v4p1/gpio.inc b/board/servo_v4p1/gpio.inc deleted file mode 100644 index 070aa90098..0000000000 --- a/board/servo_v4p1/gpio.inc +++ /dev/null @@ -1,127 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifdef SECTION_IS_RO -GPIO_INT(USB_DET_PP_CHG, PIN(C, 13), GPIO_INT_BOTH, vbus0_evt) -GPIO_INT(USB_DET_PP_DUT, PIN(C, 12), GPIO_INT_BOTH, vbus1_evt) -GPIO_INT(STM_FAULT_IRQ_L, PIN(A, 8), GPIO_INT_FALLING, tca_evt) -GPIO_INT(DP_HPD, PIN(A, 15), GPIO_INT_BOTH, dp_evt) -GPIO_INT(CHGSRV_TCPC_INT_ODL, PIN(C, 0), GPIO_INT_FALLING, tcpc_evt) -GPIO_INT(USBH_I2C_BUSY_INT, PIN(C, 9), GPIO_INT_FALLING, hub_evt) -GPIO_INT(DUT_PWR_IRQ_ODL, PIN(F, 1), GPIO_INT_FALLING, dut_pwr_evt) -#endif /* SECTION_IS_RO */ - -/* Outputs */ -GPIO(HOST_USB_HUB_RESET_L, PIN(D, 2), GPIO_ODR_HIGH) -GPIO(FASTBOOT_DUTHUB_MUX_SEL, PIN(B, 5), GPIO_OUT_HIGH) -GPIO(SBU_MUX_EN, PIN(B, 6), GPIO_OUT_LOW) -GPIO(FASTBOOT_DUTHUB_MUX_EN_L, PIN(B, 7), GPIO_OUT_LOW) -/* Power on init has reset asserted, we will pull the hub out of reset - * in the board init to help avoid brownout. - */ -GPIO(DUT_HUB_USB_RESET_L, PIN(B, 9), GPIO_ODR_HIGH) -GPIO(ATMEL_HWB_L, PIN(B, 12), GPIO_OUT_HIGH) -GPIO(USB3_A1_MUX_EN_L, PIN(F, 0), GPIO_OUT_HIGH) - -/* Inputs */ - -/* Type-C */ -/* PD RX/TX */ -GPIO(USB_C_REF, PIN(A, 1), GPIO_ANALOG) -GPIO(USB_CHG_CC1_MCU, PIN(A, 2), GPIO_ANALOG) -GPIO(USB_CHG_CC2_MCU, PIN(A, 4), GPIO_ANALOG) -GPIO(USB_DUT_CC1_MCU, PIN(A, 0), GPIO_ANALOG) -GPIO(USB_DUT_CC2_MCU, PIN(A, 5), GPIO_ANALOG) - -GPIO(USB_CHG_CC1_TX_DATA, PIN(B, 4), GPIO_INPUT) -GPIO(USB_CHG_CC2_TX_DATA, PIN(A, 6), GPIO_INPUT) -GPIO(USB_DUT_CC1_TX_DATA, PIN(B, 14), GPIO_INPUT) -GPIO(USB_DUT_CC2_TX_DATA, PIN(C, 2), GPIO_INPUT) - -GPIO(USB_DUT_CC1_RPUSB, PIN(C, 3), GPIO_INPUT) -GPIO(USB_DUT_CC1_RD, PIN(C, 6), GPIO_INPUT) -GPIO(USB_DUT_CC1_RA, PIN(C, 7), GPIO_INPUT) -GPIO(USB_DUT_CC1_RP3A0, PIN(C, 14), GPIO_INPUT) -GPIO(USB_DUT_CC1_RP1A5, PIN(C, 15), GPIO_INPUT) - -GPIO(USB_DUT_CC2_RPUSB, PIN(B, 0), GPIO_INPUT) -GPIO(USB_DUT_CC2_RD, PIN(B, 1), GPIO_INPUT) -GPIO(USB_DUT_CC2_RA, PIN(B, 2), GPIO_INPUT) -GPIO(USB_DUT_CC2_RP1A5, PIN(C, 1), GPIO_INPUT) -GPIO(USB_DUT_CC2_RP3A0, PIN(C, 8), GPIO_INPUT) - -/* Alternate PD functions */ -GPIO(USB_CHG_TX_CLKOUT, PIN(B, 8), GPIO_INPUT) -GPIO(USB_CHG_TX_CLKIN, PIN(B, 3), GPIO_INPUT) -GPIO(USB_DUT_TX_CLKOUT, PIN(B, 15), GPIO_INPUT) -GPIO(USB_DUT_TX_CLKIN, PIN(B, 13), GPIO_INPUT) - -/* I2C pins should be configured as inputs until I2C module is */ -/* initialized. This will avoid driving the lines unintentionally.*/ -GPIO(MASTER_I2C_SCL, PIN(B, 10), GPIO_INPUT) -GPIO(MASTER_I2C_SDA, PIN(B, 11), GPIO_INPUT) - -/* IOEX */ -#ifdef SECTION_IS_RO - -IOEX(SBU_UART_SEL, EXPIN(0, 0, 0), GPIO_OUT_LOW) -IOEX(ATMEL_RESET_L, EXPIN(0, 0, 1), GPIO_OUT_LOW) -IOEX(SBU_FLIP_SEL, EXPIN(0, 0, 2), GPIO_OUT_HIGH) -IOEX(USB3_A0_MUX_SEL, EXPIN(0, 0, 3), GPIO_OUT_HIGH) -IOEX(USB3_A0_MUX_EN_L, EXPIN(0, 0, 4), GPIO_OUT_LOW) -IOEX(USB3_A0_PWR_EN, EXPIN(0, 0, 5), GPIO_OUT_LOW) -IOEX(UART_18_SEL, EXPIN(0, 0, 6), GPIO_OUT_LOW) -IOEX(USERVO_POWER_EN, EXPIN(0, 0, 7), GPIO_OUT_LOW) -IOEX(USERVO_FASTBOOT_MUX_SEL, EXPIN(0, 1, 0), GPIO_OUT_LOW) -IOEX(USB3_A1_PWR_EN, EXPIN(0, 1, 1), GPIO_OUT_LOW) -IOEX(USB3_A1_MUX_SEL, EXPIN(0, 1, 2), GPIO_OUT_HIGH) -IOEX(BOARD_ID_DET0, EXPIN(0, 1, 3), GPIO_INPUT) -IOEX(BOARD_ID_DET1, EXPIN(0, 1, 4), GPIO_INPUT) -IOEX(BOARD_ID_DET2, EXPIN(0, 1, 5), GPIO_INPUT) -IOEX(VBUS_DISCHRG_EN, EXPIN(0, 1, 6), GPIO_OUT_LOW) -IOEX(DONGLE_DET, EXPIN(0, 1, 7), GPIO_INPUT) - -IOEX(EN_PP5000_ALT_3P3, EXPIN(1, 0, 0), GPIO_OUT_LOW) -IOEX(EN_PP3300_ETH, EXPIN(1, 0, 1), GPIO_OUT_HIGH) -IOEX(EN_PP3300_DP, EXPIN(1, 0, 2), GPIO_OUT_HIGH) -IOEX(FAULT_CLEAR_CC, EXPIN(1, 0, 3), GPIO_OUT_LOW) -IOEX(EN_VOUT_BUF_CC1, EXPIN(1, 0, 4), GPIO_OUT_LOW) -IOEX(EN_VOUT_BUF_CC2, EXPIN(1, 0, 5), GPIO_OUT_LOW) -IOEX(DUT_CHG_EN, EXPIN(1, 0, 6), GPIO_OUT_LOW) -IOEX(HOST_OR_CHG_CTL, EXPIN(1, 0, 7), GPIO_OUT_LOW) -IOEX(USERVO_FAULT_L, EXPIN(1, 1, 0), GPIO_INPUT) -IOEX(USB3_A0_FAULT_L, EXPIN(1, 1, 1), GPIO_INPUT) -IOEX(USB3_A1_FAULT_L, EXPIN(1, 1, 2), GPIO_INPUT) -IOEX(USB_DUTCHG_FLT_ODL, EXPIN(1, 1, 3), GPIO_INPUT) -IOEX(PP3300_DP_FAULT_L, EXPIN(1, 1, 4), GPIO_INPUT) -IOEX(DAC_BUF1_LATCH_FAULT_L, EXPIN(1, 1, 5), GPIO_INPUT) -IOEX(DAC_BUF2_LATCH_FAULT_L, EXPIN(1, 1, 6), GPIO_INPUT) -IOEX(PP5000_SRC_SEL, EXPIN(1, 1, 7), GPIO_INPUT) -IOEX(HOST_CHRG_DET, EXPIN(1, 2, 0), GPIO_INPUT) -IOEX(USBH_PWRDN_L, EXPIN(1, 2, 1), GPIO_OUT_HIGH) -IOEX(ATMEL_SS, EXPIN(1, 2, 2), GPIO_INPUT) -IOEX(ATMEL_SCLK, EXPIN(1, 2, 3), GPIO_INPUT) -IOEX(ATMEL_MOSI, EXPIN(1, 2, 4), GPIO_INPUT) -IOEX(ATMEL_MISO, EXPIN(1, 2, 5), GPIO_INPUT) -IOEX(SYS_PWR_IRQ_ODL, EXPIN(1, 2, 6), GPIO_INPUT) -IOEX(TCA_GPIO_DBG_LED_K_ODL, EXPIN(1, 2, 7), GPIO_OUT_LOW) - -#endif - -/* Unimplemented signals since we are not an EC */ -UNIMPLEMENTED(ENTERING_RW) -UNIMPLEMENTED(WP_L) - -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_USART, 0) /* USART1: PA9/PA10 - Servo DBG UART1 */ -ALTERNATE(PIN_MASK(C, 0x0030), 1, MODULE_USART, 0) /* USART3: PC4/PC5 - Servo DUT UART3 */ -ALTERNATE(PIN_MASK(C, 0x0C00), 0, MODULE_USART, 0) /* USART4: PC10/PC11 - Servo UART4 */ -ALTERNATE(PIN_MASK(B, 0x0C00), 1, MODULE_I2C, GPIO_ODR_HIGH) /* I2C MASTER:PB10/11 */ -ALTERNATE(PIN_MASK(B, 0x0008), 0, MODULE_USB_PD, 0) /* SPI1_SCK: PB3 */ -ALTERNATE(PIN_MASK(B, 0x2000), 0, MODULE_USB_PD, 0) /* SPI2_SCK: PB13 */ -ALTERNATE(PIN_MASK(B, 0x0100), 2, MODULE_USB_PD, 0) /* TIM16_CH1: PB8 */ -ALTERNATE(PIN_MASK(B, 0x8000), 1, MODULE_USB_PD, 0) /* TIM15_CH2: PB15 */ - |