diff options
Diffstat (limited to 'board/shuboz/board.h')
| -rw-r--r-- | board/shuboz/board.h | 89 |
1 files changed, 34 insertions, 55 deletions
diff --git a/board/shuboz/board.h b/board/shuboz/board.h index 6573273b93..ada5b1499d 100644 --- a/board/shuboz/board.h +++ b/board/shuboz/board.h @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -21,11 +21,11 @@ #define CONFIG_USB_PD_PORT_MAX_COUNT 2 #define CONFIG_USB_PORT_ENABLE_DYNAMIC -#undef PD_MAX_POWER_MW -#define PD_MAX_POWER_MW 45000 -#undef PD_MAX_CURRENT_MA -#define PD_MAX_CURRENT_MA 3000 -#undef CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON +#undef PD_MAX_POWER_MW +#define PD_MAX_POWER_MW 45000 +#undef PD_MAX_CURRENT_MA +#define PD_MAX_CURRENT_MA 3000 +#undef CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON #define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 40000 #define CONFIG_CHARGER_PROFILE_OVERRIDE @@ -61,59 +61,46 @@ #define CONFIG_POWER_BUTTON_INIT_TIMEOUT 5 /* GPIO mapping from board specific name to EC common name. */ -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL -#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK -#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD -#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD -#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_WP_L GPIO_EC_WP_L -#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE +#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL +#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL +#define GPIO_AC_PRESENT GPIO_ACOK_OD +#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL +#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL +#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L +#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L +#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L +#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L +#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK +#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L +#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL +#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD +#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD +#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L +#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL +#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL +#define GPIO_WP_L GPIO_EC_WP_L +#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE #ifndef __ASSEMBLER__ /* This I2C moved. Temporarily detect and support the V0 HW. */ extern int I2C_PORT_BATTERY; -enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, - ADC_TEMP_SENSOR_SOC, - ADC_CH_COUNT -}; +enum adc_channel { ADC_TEMP_SENSOR_CHARGER, ADC_TEMP_SENSOR_SOC, ADC_CH_COUNT }; enum battery_type { BATTERY_CM1500, BATTERY_TYPE_COUNT, }; -enum pwm_channel { - PWM_CH_KBLIGHT = 0, - PWM_CH_COUNT -}; +enum pwm_channel { PWM_CH_KBLIGHT = 0, PWM_CH_COUNT }; -enum ioex_port { - IOEX_C0_NCT3807 = 0, - IOEX_C1_NCT3807, - IOEX_PORT_COUNT -}; +enum ioex_port { IOEX_C0_NCT3807 = 0, IOEX_C1_NCT3807, IOEX_PORT_COUNT }; -#define PORT_TO_HPD(port) ((port == 0) \ - ? GPIO_USB3_C0_DP2_HPD \ - : GPIO_DP1_HPD) +#define PORT_TO_HPD(port) ((port == 0) ? GPIO_USB3_C0_DP2_HPD : GPIO_DP1_HPD) enum temp_sensor_id { TEMP_SENSOR_CHARGER = 0, @@ -122,17 +109,9 @@ enum temp_sensor_id { TEMP_SENSOR_COUNT }; -enum usba_port { - USBA_PORT_A0 = 0, - USBA_PORT_A1, - USBA_PORT_COUNT -}; +enum usba_port { USBA_PORT_A0 = 0, USBA_PORT_A1, USBA_PORT_COUNT }; -enum usbc_port { - USBC_PORT_C0 = 0, - USBC_PORT_C1, - USBC_PORT_COUNT -}; +enum usbc_port { USBC_PORT_C0 = 0, USBC_PORT_C1, USBC_PORT_COUNT }; /***************************************************************************** * CBI EC FW Configuration |