diff options
Diffstat (limited to 'board/shuboz/gpio.inc')
| -rw-r--r-- | board/shuboz/gpio.inc | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/board/shuboz/gpio.inc b/board/shuboz/gpio.inc deleted file mode 100644 index b093a7e6d6..0000000000 --- a/board/shuboz/gpio.inc +++ /dev/null @@ -1,134 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(USB_C0_TCPC_INT_ODL, PIN(3, 4), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(F, 1), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C0_PPC_FAULT_ODL, PIN(6, 3), GPIO_INT_FALLING, ppc_interrupt) -/* PPC interrupts trigger on falling edge, but HDMI HPD triggers on rising edge. */ -GPIO_INT(USB_C1_PPC_INT_ODL, PIN(D, 4), GPIO_INT_BOTH | GPIO_PULL_UP, ppc_interrupt) -GPIO_INT(USB_C0_BC12_INT_ODL, PIN(9, 3), GPIO_INT_FALLING | GPIO_PULL_UP, bc12_interrupt) -GPIO_INT(USB_C1_BC12_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_PULL_UP, bc12_interrupt) -GPIO_INT(SLP_S3_L, PIN(7, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(SLP_S5_L, PIN(E, 0), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(S0_PWROK_OD, PIN(5, 6), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(EC_PWROK_OD, PIN(3, 7), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) -GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) -GPIO_INT(EC_WP_L, PIN(5, 0), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(VOLUP_BTN_ODL, PIN(A, 6), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(VOLDN_BTN_ODL, PIN(9, 5), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(6AXIS_INT_L, PIN(A, 0), GPIO_INT_FALLING | GPIO_PULL_UP, motion_interrupt) - -/* GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an interrupt handler. */ -GPIO(EC_RST_ODL, PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) - -GPIO(3AXIS_INT_L, PIN(9, 6), GPIO_INPUT | GPIO_PULL_DOWN) /* 3 Axis Accel */ -GPIO(CCD_MODE_ODL, PIN(C, 6), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(PROCHOT_ODL, PIN(D, 5), GPIO_ODR_HIGH) /* PROCHOT to SOC */ -GPIO(EC_BATT_PRES_ODL, PIN(4, 1), GPIO_INPUT) /* Battery Present */ -GPIO(EC_AP_INT_ODL, PIN(A, 3), GPIO_ODR_HIGH) /* Sensor MKBP event to SOC */ -GPIO(EN_PWR_A, PIN(B, 7), GPIO_OUT_LOW) /* Enable Power */ -GPIO(EC_EDP_BL_DISABLE, PIN(A, 2), GPIO_OUT_HIGH) /* Enable Backlight */ -GPIO(EC_ENTERING_RW, PIN(E, 5), GPIO_OUT_LOW) /* EC Entering RW */ -GPIO(EC_FCH_PWR_BTN_L, PIN(6, 7), GPIO_OUT_HIGH) /* Power Button to SOC */ -GPIO(EC_FCH_RSMRST_L, PIN(A, 1), GPIO_OUT_LOW) /* RSMRST# to SOC */ -GPIO(EC_FCH_PWROK, PIN(7, 0), GPIO_OUT_LOW) /* Power OK to SOC */ -GPIO(EC_FCH_WAKE_L, PIN(0, 3), GPIO_OUT_HIGH) /* Wake SOC */ -GPIO(EC_FCH_SCI_ODL, PIN(7, 6), GPIO_ODR_HIGH) /* SCI to SOC */ -GPIO(EC_SYS_RST_L, PIN(C, 7), GPIO_ODR_HIGH) /* Cold Reset to SOC */ -GPIO(USB_C0_TCPC_RST_L, PIN(E, 1), GPIO_OUT_HIGH) /* C0 TCPC Reset */ -GPIO(USB_C1_TCPC_RST_L, PIN(F, 0), GPIO_OUT_HIGH) /* C1 TCPC Reset */ -GPIO(USB3_C0_DP2_HPD, PIN(F, 5), GPIO_OUT_LOW) /* C0 DP Hotplug Detect */ -GPIO(DP1_HPD, PIN(F, 4), GPIO_OUT_LOW) /* C1 DP Hotplug Detect */ -GPIO(EC_H1_PACKET_MODE, PIN(8, 6), GPIO_OUT_LOW) /* H1 Packet Mode */ - -UNIMPLEMENTED(PCH_SMI_L) - -GPIO(LED_FULL_L, PIN(6, 0), GPIO_OUT_HIGH) -GPIO(LED_CHRG_L, PIN(C, 0), GPIO_OUT_HIGH) - -/* - * Dalboz has 2 DB options, with different IO expanders. IOEX_C1_NCT3807 is the - * OPT1 DB (USB-C1), IOEX_HDMI_PCAL6408 is the OPT2 DB (HDMI). - */ - -IOEX_INT(USB_C0_SBU_FAULT_ODL, EXPIN(IOEX_C0_NCT3807, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt) -IOEX_INT(USB_C1_SBU_FAULT_DB_ODL, EXPIN(IOEX_C1_NCT3807, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt) - -IOEX(USB_C0_FAULT_ODL, EXPIN(IOEX_C0_NCT3807, 0, 3), GPIO_ODR_HIGH) /* C0 Fault to SOC */ -IOEX(USB_C0_TCPC_FASTSW_CTL_EN, EXPIN(IOEX_C0_NCT3807, 0, 4), GPIO_OUT_LOW) /* C0 FastSwitch Control */ -IOEX(USB_C1_FAULT_ODL, EXPIN(IOEX_C0_NCT3807, 1, 0), GPIO_ODR_HIGH) /* C1 Fault to SOC */ -IOEX(USB_C0_PPC_ILIM_3A_EN, EXPIN(IOEX_C0_NCT3807, 1, 1), GPIO_OUT_LOW) /* C0 3A Current Limit Enable */ -IOEX(KB_BL_EN, EXPIN(IOEX_C0_NCT3807, 1, 3), GPIO_OUT_LOW) /* KB Backlight Enable */ -IOEX(EN_USB_A0_5V, EXPIN(IOEX_C0_NCT3807, 1, 5), GPIO_OUT_LOW) /* A0 5V Source Enable */ -IOEX(USB_A0_CHARGE_EN_L, EXPIN(IOEX_C0_NCT3807, 1, 6), GPIO_OUT_HIGH) /* A0 5V High Current Enable */ -IOEX(USB_C0_SBU_FLIP, EXPIN(IOEX_C0_NCT3807, 1, 7), GPIO_OUT_LOW) /* C0 SBU Flip */ - -IOEX(USB_A1_RETIMER_EN, EXPIN(IOEX_C1_NCT3807, 0, 0), GPIO_OUT_LOW) /* A1 Retimer Enable */ -IOEX(USB_C1_HPD_IN_DB, EXPIN(IOEX_C1_NCT3807, 0, 2), GPIO_OUT_LOW) /* C1 HPD */ -IOEX(USB_C1_TCPC_FASTSW_CTL_EN, EXPIN(IOEX_C1_NCT3807, 0, 4), GPIO_OUT_LOW) /* C1 FastSwitch Control */ -IOEX(USB_C1_PPC_EN_L, EXPIN(IOEX_C1_NCT3807, 1, 3), GPIO_OUT_LOW) /* C1 PPC Enable */ -IOEX(USB_C1_DATA_EN, EXPIN(IOEX_C1_NCT3807, 1, 5), GPIO_OUT_HIGH) /* C1 Retimer Enable */ -IOEX(EN_USB_A1_5V_DB, EXPIN(IOEX_C1_NCT3807, 1, 6), GPIO_OUT_LOW) /* A1 5V Source Enable */ -IOEX(USB_A1_CHARGE_EN_DB_L, EXPIN(IOEX_C1_NCT3807, 1, 7), GPIO_OUT_HIGH) /* A1 5V High Current Enable */ - -/* - * The NPCX LPC driver configures and controls SCI, so PCH_SCI_ODL [PIN(7, 6)] - * is not defined here as GPIO. - */ - -/* I2C pins - these will be reconfigured for alternate function below */ -GPIO(EC_I2C_USB_A0_C0_SCL, PIN(B, 5), GPIO_INPUT) -GPIO(EC_I2C_USB_A0_C0_SDA, PIN(B, 4), GPIO_INPUT) -GPIO(EC_I2C_USB_A1_C1_SCL, PIN(9, 0), GPIO_INPUT) -GPIO(EC_I2C_USB_A1_C1_SDA, PIN(8, 7), GPIO_INPUT) -GPIO(EC_I2C_POWER_SCL, PIN(9, 2), GPIO_INPUT) -GPIO(EC_I2C_POWER_SDA, PIN(9, 1), GPIO_INPUT) -GPIO(EC_I2C_USBC_AP_MUX_SCL, PIN(D, 1), GPIO_INPUT) -GPIO(EC_I2C_USBC_AP_MUX_SDA, PIN(D, 0), GPIO_INPUT) -GPIO(FCH_SIC, PIN(F, 3), GPIO_INPUT) -GPIO(FCH_SID, PIN(F, 2), GPIO_INPUT) -GPIO(EC_I2C_SENSOR_CBI_SCL, PIN(3, 3), GPIO_INPUT) -GPIO(EC_I2C_SENSOR_CBI_SDA, PIN(3, 6), GPIO_INPUT) -GPIO(I2C_AUDIO_USB_HUB_SCL, PIN(E, 4), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(I2C_AUDIO_USB_HUB_SDA, PIN(E, 3), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(EC_I2C_BATT_SCL, PIN(B, 3), GPIO_INPUT) -GPIO(EC_I2C_BATT_SDA, PIN(B, 2), GPIO_INPUT) - -ALTERNATE(PIN_MASK(6, BIT(4) | BIT(5)), 0, MODULE_UART, 0) /* Cr50 requires no pullups. */ - -ALTERNATE(PIN_MASK(B, BIT(4) | BIT(5)), 0, MODULE_I2C, 0) /* I2C0 */ -ALTERNATE(PIN_MASK(9, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */ -ALTERNATE(PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0) /* I2C1 SDA */ -ALTERNATE(PIN_MASK(D, BIT(0) | BIT(1)), 0, MODULE_I2C, 0) /* I2C3 */ -ALTERNATE(PIN_MASK(F, BIT(2) | BIT(3)), 0, MODULE_I2C, 0) /* I2C4 */ -ALTERNATE(PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0) /* I2C5 */ -ALTERNATE(PIN_MASK(E, BIT(3) | BIT(4)), 0, MODULE_I2C, 0) /* I2C6 */ -ALTERNATE(PIN_MASK(B, BIT(2) | BIT(3)), 0, MODULE_I2C, 0) /* I2C7 */ - -ALTERNATE(PIN_MASK(4, BIT(2) | BIT(3)), 0, MODULE_ADC, 0) /* ADC2, ADC3 Temp Sensors */ - -ALTERNATE(PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0) /* PWM3 KB Backlight */ - -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */ -ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_02-07 */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */ -GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */ -ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */ -ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-12 */ - -/* Power Switch Logic (PSL) inputs */ -ALTERNATE(PIN_MASK(0, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_PMU, 0) /* AC_PRESENT, POWER_BUTTON_L, EC_RST_ODL */ -ALTERNATE(PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0) /* LID_OPEN */ - -ALTERNATE(PIN_MASK(A, 0xA0), 1, MODULE_WOV, 0) /* I2S_SYNC/I2S_SCLK GPIOA5/A7 */ -ALTERNATE(PIN_MASK(B, 0x01), 1, MODULE_WOV, 0) /* I2S_SDAT GPIOB0 */ -ALTERNATE(PIN_MASK(9, 0x90), 1, MODULE_WOV, 0) /* DMIC_CLK/DMIC_IN GPIO94/97 */ |