1 files changed, 0 insertions, 125 deletions
diff --git a/board/spherion/board.c b/board/spherion/board.c
deleted file mode 100644
index 1119b1f077..0000000000
--- a/board/spherion/board.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* Spherion board configuration */
-
-#include "adc.h"
-#include "button.h"
-#include "charge_manager.h"
-#include "charge_state_v2.h"
-#include "charger.h"
-#include "chipset.h"
-#include "common.h"
-#include "console.h"
-#include "driver/accel_lis2dw12.h"
-#include "driver/accelgyro_bmi_common.h"
-#include "driver/als_tcs3400.h"
-#include "driver/bc12/mt6360.h"
-#include "driver/bc12/pi3usb9201.h"
-#include "driver/charger/isl923x.h"
-#include "driver/ppc/syv682x.h"
-#include "driver/tcpm/it83xx_pd.h"
-#include "driver/temp_sensor/thermistor.h"
-#include "driver/usb_mux/it5205.h"
-#include "driver/usb_mux/ps8743.h"
-#include "extpower.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "regulator.h"
-#include "spi.h"
-#include "switch.h"
-#include "tablet_mode.h"
-#include "task.h"
-#include "temp_sensor.h"
-#include "timer.h"
-#include "uart.h"
-#include "usb_charge.h"
-#include "usb_mux.h"
-#include "usb_pd_tcpm.h"
-#include "usbc_ppc.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
-
-/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
-const struct adc_t adc_channels[] = {
-	/* Convert to mV (3000mV/1024). */
-	{"VBUS_C0", ADC_MAX_MVOLT * 10, ADC_READ_MAX + 1, 0, CHIP_ADC_CH0},
-	{"BOARD_ID_0", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH1},
-	{"BOARD_ID_1", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH2},
-	/* AMON/BMON gain = 17.97 */
-	{"CHARGER_AMON_R", ADC_MAX_MVOLT * 1000 / 17.97, ADC_READ_MAX + 1, 0,
-	 CHIP_ADC_CH3},
-	{"VBUS_C1", ADC_MAX_MVOLT * 10, ADC_READ_MAX + 1, 0, CHIP_ADC_CH5},
-	{"CHARGER_PMON", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH6},
-	{"TEMP_SENSOR_CHARGER", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0,
-	 CHIP_ADC_CH7},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-const struct temp_sensor_t temp_sensors[] = {
-	[TEMP_SENSOR_CHARGER] = {.name = "Charger",
-				 .type = TEMP_SENSOR_TYPE_BOARD,
-				 .read = get_temp_3v3_30k9_47k_4050b,
-				 .idx = ADC_TEMP_SENSOR_CHARGER},
-};
-BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
-
-/* PWM */
-
-/*
- * PWM channels. Must be in the exactly same order as in enum pwm_channel.
- * There total three 16 bits clock prescaler registers for all pwm channels,
- * so use the same frequency and prescaler register setting is required if
- * number of pwm channel greater than three.
- */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_KBLIGHT] = {
-		.channel = PWM_HW_CH_DCR2,
-		.flags = 0,
-		.freq_hz = 10000,
-		.pcfsr_sel = PWM_PRESCALER_C4
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
-
-static void kb_backlight_enable(void)
-{
-	gpio_set_level(GPIO_EC_KB_BL_EN, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, kb_backlight_enable, HOOK_PRIO_DEFAULT);
-
-static void kb_backlight_disable(void)
-{
-	gpio_set_level(GPIO_EC_KB_BL_EN, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, kb_backlight_disable, HOOK_PRIO_DEFAULT);
-
-void board_usb_mux_init(void)
-{
-	if (board_get_sub_board() == SUB_BOARD_TYPEC)
-		ps8743_tune_usb_eq(&usb_muxes[1],
-				   PS8743_USB_EQ_TX_12_8_DB,
-				   PS8743_USB_EQ_RX_12_8_DB);
-}
-DECLARE_HOOK(HOOK_INIT, board_usb_mux_init, HOOK_PRIO_INIT_I2C + 1);
-
-static void board_suspend(void)
-{
-	gpio_set_level(GPIO_EN_5V_USM, 0);
-}
-DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_suspend, HOOK_PRIO_DEFAULT);
-
-static void board_resume(void)
-{
-	gpio_set_level(GPIO_EN_5V_USM, 1);
-}
-DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_resume, HOOK_PRIO_DEFAULT);