diff options
Diffstat (limited to 'board/storo/board.h')
| -rw-r--r-- | board/storo/board.h | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/board/storo/board.h b/board/storo/board.h deleted file mode 100644 index a89bde6fcf..0000000000 --- a/board/storo/board.h +++ /dev/null @@ -1,147 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Storo board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Select Baseboard features */ -#define VARIANT_DEDEDE_EC_IT8320 -#include "baseboard.h" - -/* EC console commands */ -#define CONFIG_CMD_TCPC_DUMP -#define CONFIG_CMD_CHARGER_DUMP - -/* Battery */ -#define CONFIG_BATTERY_FUEL_GAUGE - -/* BC 1.2 */ -#define CONFIG_BC12_DETECT_PI3USB9201 - -/* Charger */ -#define CONFIG_CHARGER_RAA489000 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ -#define CONFIG_OCPC -#undef CONFIG_CHARGER_SINGLE_CHIP -#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) - -#define GPIO_USB_C1_INT_ODL GPIO_SUB_USB_C1_INT_ODL - -/* LED */ -#define CONFIG_LED_ONOFF_STATES -#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10 - -#define I2C_PORT_ACCEL I2C_PORT_SENSOR - -/* Sensors */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT - -#define CONFIG_ACCEL_BMA255 /* Lid accel */ -#define CONFIG_ACCEL_LIS2DWL -#define CONFIG_ACCEL_KX022 -#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ -#define CONFIG_ACCELGYRO_ICM42607 - -/* Lid operates in forced mode, base in FIFO */ -#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) -#define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) - -#define CONFIG_ACCELGYRO_ICM42607_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) - -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH -#define CONFIG_GMR_TABLET_MODE - -/* TCPC */ -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_TCPM_RAA489000 - -/* USB defines specific to external TCPCs */ -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_5V_EN_CUSTOM - -/* Thermistors */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR -#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B - -/* USB Mux and Retimer */ -#define CONFIG_USB_MUX_IT5205 /* C1: ITE Mux */ -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* Required for ITE Mux */ - -#define CONFIG_USBC_RETIMER_TUSB544 /* C1 Redriver: TUSB544 */ - - - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum chg_id { - CHARGER_PRIMARY, - CHARGER_SECONDARY, - CHARGER_NUM, -}; - - - -/* Motion sensors */ -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; - -/* ADC channels */ -enum adc_channel { - ADC_VSNS_PP3300_A, /* ADC0 */ - ADC_TEMP_SENSOR_1, /* ADC2 */ - ADC_TEMP_SENSOR_2, /* ADC3 */ - ADC_TEMP_SENSOR_3, /* ADC15*/ - ADC_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_1, - TEMP_SENSOR_2, - TEMP_SENSOR_3, - TEMP_SENSOR_COUNT -}; - -/* List of possible batteries */ -enum battery_type { - BATTERY_C21N2018, - BATTERY_TYPE_COUNT, -}; - -void motion_interrupt(enum gpio_signal signal); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |