diff options
Diffstat (limited to 'board/storo')
-rw-r--r-- | board/storo/battery.c | 2 | ||||
-rw-r--r-- | board/storo/board.c | 334 | ||||
-rw-r--r-- | board/storo/board.h | 44 | ||||
-rw-r--r-- | board/storo/build.mk | 2 | ||||
-rw-r--r-- | board/storo/cbi_ssfc.c | 6 | ||||
-rw-r--r-- | board/storo/cbi_ssfc.h | 3 | ||||
-rw-r--r-- | board/storo/ec.tasklist | 2 | ||||
-rw-r--r-- | board/storo/gpio.inc | 2 | ||||
-rw-r--r-- | board/storo/led.c | 45 | ||||
-rw-r--r-- | board/storo/usb_pd_policy.c | 6 |
10 files changed, 213 insertions, 233 deletions
diff --git a/board/storo/battery.c b/board/storo/battery.c index b28e5bbf37..5a927ffc26 100644 --- a/board/storo/battery.c +++ b/board/storo/battery.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * diff --git a/board/storo/board.c b/board/storo/board.c index d7e0305d1f..f6f3ed5750 100644 --- a/board/storo/board.c +++ b/board/storo/board.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -48,8 +48,8 @@ #include "usb_pd.h" #include "usb_pd_tcpm.h" -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprints(CC_SYSTEM, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprints(CC_SYSTEM, format, ##args) #define INT_RECHECK_US 5000 @@ -139,34 +139,26 @@ static void pen_detect_interrupt(enum gpio_signal s) /* ADC channels */ const struct adc_t adc_channels[] = { - [ADC_VSNS_PP3300_A] = { - .name = "PP3300_A_PGOOD", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = CHIP_ADC_CH0 - }, - [ADC_TEMP_SENSOR_1] = { - .name = "TEMP_SENSOR1", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = CHIP_ADC_CH2 - }, - [ADC_TEMP_SENSOR_2] = { - .name = "TEMP_SENSOR2", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = CHIP_ADC_CH3 - }, - [ADC_TEMP_SENSOR_3] = { - .name = "TEMP_SENSOR3", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = CHIP_ADC_CH15 - }, + [ADC_VSNS_PP3300_A] = { .name = "PP3300_A_PGOOD", + .factor_mul = ADC_MAX_MVOLT, + .factor_div = ADC_READ_MAX + 1, + .shift = 0, + .channel = CHIP_ADC_CH0 }, + [ADC_TEMP_SENSOR_1] = { .name = "TEMP_SENSOR1", + .factor_mul = ADC_MAX_MVOLT, + .factor_div = ADC_READ_MAX + 1, + .shift = 0, + .channel = CHIP_ADC_CH2 }, + [ADC_TEMP_SENSOR_2] = { .name = "TEMP_SENSOR2", + .factor_mul = ADC_MAX_MVOLT, + .factor_div = ADC_READ_MAX + 1, + .shift = 0, + .channel = CHIP_ADC_CH3 }, + [ADC_TEMP_SENSOR_3] = { .name = "TEMP_SENSOR3", + .factor_mul = ADC_MAX_MVOLT, + .factor_div = ADC_READ_MAX + 1, + .shift = 0, + .channel = CHIP_ADC_CH15 }, }; BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); @@ -226,14 +218,7 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { }; /* USB Retimer */ -enum tusb544_conf { - USB_DP = 0, - USB_DP_INV, - USB, - USB_INV, - DP, - DP_INV -}; +enum tusb544_conf { USB_DP = 0, USB_DP_INV, USB, USB_INV, DP, DP_INV }; /* * Registers we care about of are all the same between NCS8510 and TUSB544, @@ -246,33 +231,32 @@ enum tusb544_conf { */ static int board_tusb544_set(const struct usb_mux *me, mux_state_t mux_state) { - int rv = EC_SUCCESS; + int rv = EC_SUCCESS; int reg; enum tusb544_conf usb_mode = 0; if (mux_state & USB_PD_MUX_USB_ENABLED) { if (mux_state & USB_PD_MUX_DP_ENABLED) { /* USB with DP */ - usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) - ? USB_DP_INV - : USB_DP; + usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ? + USB_DP_INV : + USB_DP; } else { /* USB without DP */ - usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) - ? USB_INV - : USB; + usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ? + USB_INV : + USB; } } else if (mux_state & USB_PD_MUX_DP_ENABLED) { /* DP without USB */ - usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) - ? DP_INV - : DP; + usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ? DP_INV : + DP; } else { return EC_SUCCESS; } - rv = i2c_read8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL6, ®); + rv = i2c_read8(me->i2c_port, me->i2c_addr_flags, TUSB544_REG_GENERAL6, + ®); if (rv) return rv; @@ -280,52 +264,52 @@ static int board_tusb544_set(const struct usb_mux *me, mux_state_t mux_state) reg &= ~TUSB544_VOD_DCGAIN_SEL; reg |= (TUSB544_VOD_DCGAIN_SETTING_5 << 2); - rv = i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL6, reg); + rv = i2c_write8(me->i2c_port, me->i2c_addr_flags, TUSB544_REG_GENERAL6, + reg); if (rv) return rv; /* Write the retimer config byte */ if (usb_mode == USB_INV) { rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL4, 0x15); + TUSB544_REG_GENERAL4, 0x15); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_1, 0xff); + TUSB544_REG_USB3_1_1, 0xff); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_2, 0xff); + TUSB544_REG_USB3_1_2, 0xff); } else if (usb_mode == USB) { rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL4, 0x11); + TUSB544_REG_GENERAL4, 0x11); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_1, 0xff); + TUSB544_REG_USB3_1_1, 0xff); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_2, 0xff); + TUSB544_REG_USB3_1_2, 0xff); } else if (usb_mode == USB_DP_INV) { rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL4, 0x1F); + TUSB544_REG_GENERAL4, 0x1F); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_1, 0xff); + TUSB544_REG_USB3_1_1, 0xff); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_2, 0xff); + TUSB544_REG_USB3_1_2, 0xff); } else if (usb_mode == USB_DP) { rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL4, 0x1B); + TUSB544_REG_GENERAL4, 0x1B); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_1, 0xff); + TUSB544_REG_USB3_1_1, 0xff); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_USB3_1_2, 0xff); + TUSB544_REG_USB3_1_2, 0xff); } else if (usb_mode == DP_INV) { rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL4, 0x1E); + TUSB544_REG_GENERAL4, 0x1E); } else if (usb_mode == DP) { rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_GENERAL4, 0x1A); + TUSB544_REG_GENERAL4, 0x1A); } rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_DISPLAYPORT_1, 0x66); + TUSB544_REG_DISPLAYPORT_1, 0x66); rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags, - TUSB544_REG_DISPLAYPORT_2, 0x66); + TUSB544_REG_DISPLAYPORT_2, 0x66); if (rv) return EC_ERROR_UNKNOWN; else @@ -333,28 +317,37 @@ static int board_tusb544_set(const struct usb_mux *me, mux_state_t mux_state) } /* USB Retimer */ -const struct usb_mux usbc1_retimer = { - .usb_port = 1, - .i2c_port = I2C_PORT_SUB_USB_C1, - .i2c_addr_flags = TUSB544_I2C_ADDR_FLAGS0, - .driver = &tusb544_drv, - .board_set = &board_tusb544_set, +const struct usb_mux_chain usbc1_retimer = { + .mux = + &(const struct usb_mux){ + .usb_port = 1, + .i2c_port = I2C_PORT_SUB_USB_C1, + .i2c_addr_flags = TUSB544_I2C_ADDR_FLAGS0, + .driver = &tusb544_drv, + .board_set = &board_tusb544_set, + }, }; /* USB Muxes */ -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { +const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { { - .usb_port = 0, - .i2c_port = I2C_PORT_USB_C0, - .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, - .driver = &it5205_usb_mux_driver, + .mux = + &(const struct usb_mux){ + .usb_port = 0, + .i2c_port = I2C_PORT_USB_C0, + .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, + .driver = &it5205_usb_mux_driver, + }, }, { - .usb_port = 1, - .i2c_port = I2C_PORT_SUB_USB_C1, - .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, - .driver = &it5205_usb_mux_driver, - .next_mux = &usbc1_retimer, + .mux = + &(const struct usb_mux){ + .usb_port = 1, + .i2c_port = I2C_PORT_SUB_USB_C1, + .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, + .driver = &it5205_usb_mux_driver, + }, + .next = &usbc1_retimer, }, }; @@ -461,8 +454,7 @@ int board_is_sourcing_vbus(int port) int board_set_active_charge_port(int port) { - int is_real_port = (port >= 0 && - port < board_get_usb_pd_port_count()); + int is_real_port = (port >= 0 && port < board_get_usb_pd_port_count()); int i; int old_port; @@ -526,9 +518,8 @@ int board_set_active_charge_port(int port) return EC_SUCCESS; } -__override void ocpc_get_pid_constants(int *kp, int *kp_div, - int *ki, int *ki_div, - int *kd, int *kd_div) +__override void ocpc_get_pid_constants(int *kp, int *kp_div, int *ki, + int *ki_div, int *kd, int *kd_div) { *kp = 3; *kp_div = 14; @@ -553,17 +544,13 @@ static struct mutex g_lid_mutex; static struct mutex g_base_mutex; /* Matrices to rotate accelerometers into the standard reference. */ -static const mat33_fp_t lid_standard_ref = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(1), 0, 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t lid_standard_ref = { { 0, FLOAT_TO_FP(1), 0 }, + { FLOAT_TO_FP(1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; -static const mat33_fp_t base_standard_ref = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(-1), 0, 0}, - { 0, 0, FLOAT_TO_FP(1)} -}; +static const mat33_fp_t base_standard_ref = { { 0, FLOAT_TO_FP(1), 0 }, + { FLOAT_TO_FP(-1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(1) } }; static struct accelgyro_saved_data_t g_bma253_data; static struct bmi_drv_data_t g_bmi160_data; @@ -639,11 +626,9 @@ struct motion_sensor_t motion_sensors[] = { unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); -static const mat33_fp_t lid_lis2dwl_ref = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(1), 0, 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t lid_lis2dwl_ref = { { 0, FLOAT_TO_FP(1), 0 }, + { FLOAT_TO_FP(1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; /* Lid accel private data */ static struct stprivate_data g_lis2dwl_data; @@ -675,11 +660,9 @@ struct motion_sensor_t lis2dwl_lid_accel = { }, }; -static const mat33_fp_t lid_KX022_ref = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(1), 0, 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t lid_KX022_ref = { { 0, FLOAT_TO_FP(1), 0 }, + { FLOAT_TO_FP(1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; static struct kionix_accel_data g_kx022_data; struct motion_sensor_t kx022_lid_accel = { @@ -710,11 +693,9 @@ struct motion_sensor_t kx022_lid_accel = { }; static struct icm_drv_data_t g_icm42607_data; -const mat33_fp_t based_ref_icm42607 = { - { FLOAT_TO_FP(1), 0, 0}, - { 0, FLOAT_TO_FP(1), 0}, - { 0, 0, FLOAT_TO_FP(1)} -}; +const mat33_fp_t based_ref_icm42607 = { { FLOAT_TO_FP(1), 0, 0 }, + { 0, FLOAT_TO_FP(1), 0 }, + { 0, 0, FLOAT_TO_FP(1) } }; struct motion_sensor_t icm42607_base_accel = { .name = "Base Accel", .active_mask = SENSOR_ACTIVE_S0_S3, @@ -743,29 +724,26 @@ struct motion_sensor_t icm42607_base_accel = { }; struct motion_sensor_t icm42607_base_gyro = { - .name = "Base Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_ICM42607, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &icm42607_drv, - .mutex = &g_base_mutex, - .drv_data = &g_icm42607_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = ICM42607_ADDR0_FLAGS, - .default_range = 1000, /* dps */ - .rot_standard_ref = &based_ref_icm42607, - .min_frequency = ICM42607_GYRO_MIN_FREQ, - .max_frequency = ICM42607_GYRO_MAX_FREQ, + .name = "Base Gyro", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_ICM42607, + .type = MOTIONSENSE_TYPE_GYRO, + .location = MOTIONSENSE_LOC_BASE, + .drv = &icm42607_drv, + .mutex = &g_base_mutex, + .drv_data = &g_icm42607_data, + .port = I2C_PORT_ACCEL, + .i2c_spi_addr_flags = ICM42607_ADDR0_FLAGS, + .default_range = 1000, /* dps */ + .rot_standard_ref = &based_ref_icm42607, + .min_frequency = ICM42607_GYRO_MIN_FREQ, + .max_frequency = ICM42607_GYRO_MAX_FREQ, }; - static struct bmi_drv_data_t g_bmi220_data; -const mat33_fp_t based_ref_bmi220 = { - { 0, FLOAT_TO_FP(1), 0}, - { FLOAT_TO_FP(-1), 0, 0}, - { 0, 0, FLOAT_TO_FP(1)} -}; +const mat33_fp_t based_ref_bmi220 = { { 0, FLOAT_TO_FP(1), 0 }, + { FLOAT_TO_FP(-1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(1) } }; struct motion_sensor_t bmi220_base_accel = { .name = "Base Accel", .active_mask = SENSOR_ACTIVE_S0_S3, @@ -794,20 +772,20 @@ struct motion_sensor_t bmi220_base_accel = { }; struct motion_sensor_t bmi220_base_gyro = { - .name = "Base Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI220, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi260_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi220_data, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = BMI260_ADDR0_FLAGS, - .default_range = 1000, /* dps */ - .rot_standard_ref = &based_ref_bmi220, - .min_frequency = BMI_GYRO_MIN_FREQ, - .max_frequency = BMI_GYRO_MAX_FREQ, + .name = "Base Gyro", + .active_mask = SENSOR_ACTIVE_S0_S3, + .chip = MOTIONSENSE_CHIP_BMI220, + .type = MOTIONSENSE_TYPE_GYRO, + .location = MOTIONSENSE_LOC_BASE, + .drv = &bmi260_drv, + .mutex = &g_base_mutex, + .drv_data = &g_bmi220_data, + .port = I2C_PORT_ACCEL, + .i2c_spi_addr_flags = BMI260_ADDR0_FLAGS, + .default_range = 1000, /* dps */ + .rot_standard_ref = &based_ref_bmi220, + .min_frequency = BMI_GYRO_MIN_FREQ, + .max_frequency = BMI_GYRO_MAX_FREQ, }; void board_init(void) @@ -846,13 +824,13 @@ void board_init(void) if (board_id > 2) { if (get_cbi_fw_config_tablet_mode()) { if (get_cbi_ssfc_base_sensor() == - SSFC_SENSOR_ICM42607) { + SSFC_SENSOR_ICM42607) { motion_sensors[BASE_ACCEL] = - icm42607_base_accel; + icm42607_base_accel; motion_sensors[BASE_GYRO] = icm42607_base_gyro; CPRINTF("BASE GYRO is ICM42607"); } else if (get_cbi_ssfc_base_sensor() == - SSFC_SENSOR_BMI220) { + SSFC_SENSOR_BMI220) { motion_sensors[BASE_ACCEL] = bmi220_base_accel; motion_sensors[BASE_GYRO] = bmi220_base_gyro; CPRINTF("BASE GYRO is BMI220"); @@ -864,7 +842,7 @@ void board_init(void) motion_sensors[LID_ACCEL] = lis2dwl_lid_accel; CPRINTF("LID_ACCEL is LIS2DWL"); } else if (get_cbi_ssfc_lid_sensor() == - SSFC_SENSOR_KX022) { + SSFC_SENSOR_KX022) { motion_sensors[LID_ACCEL] = kx022_lid_accel; CPRINTF("LID_ACCEL is KX022"); } else { @@ -878,7 +856,7 @@ void board_init(void) * line to float. */ gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L, - GPIO_INPUT | GPIO_PULL_DOWN); + GPIO_INPUT | GPIO_PULL_DOWN); } } else { if (get_cbi_ssfc_base_sensor() == SSFC_SENSOR_ICM42607) { @@ -908,34 +886,34 @@ DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); void motion_interrupt(enum gpio_signal signal) { - switch (get_cbi_ssfc_base_sensor()) { - case SSFC_SENSOR_ICM42607: - icm42607_interrupt(signal); - break; - case SSFC_SENSOR_BMI220: - bmi260_interrupt(signal); - break; - case SSFC_SENSOR_BMI160: - default: - bmi160_interrupt(signal); - break; - } + switch (get_cbi_ssfc_base_sensor()) { + case SSFC_SENSOR_ICM42607: + icm42607_interrupt(signal); + break; + case SSFC_SENSOR_BMI220: + bmi260_interrupt(signal); + break; + case SSFC_SENSOR_BMI160: + default: + bmi160_interrupt(signal); + break; + } } /* Thermistors */ const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_1] = {.name = "Memory", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_1}, - [TEMP_SENSOR_2] = {.name = "Ambient", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_2}, - [TEMP_SENSOR_3] = {.name = "Cpu", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_3}, + [TEMP_SENSOR_1] = { .name = "Memory", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_1 }, + [TEMP_SENSOR_2] = { .name = "Ambient", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_2 }, + [TEMP_SENSOR_3] = { .name = "Cpu", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_3 }, }; BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); diff --git a/board/storo/board.h b/board/storo/board.h index 4532d11b4e..93dd573ba1 100644 --- a/board/storo/board.h +++ b/board/storo/board.h @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -25,11 +25,14 @@ /* Charger */ #define CONFIG_CHARGER_RAA489000 +#define PD_MAX_VOLTAGE_MV 20000 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 #define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ +#define CONFIG_OCPC_DEF_RBATT_MOHMS \ + 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr \ + */ #define CONFIG_OCPC -#undef CONFIG_CHARGER_SINGLE_CHIP +#undef CONFIG_CHARGER_SINGLE_CHIP #undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE #define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) @@ -37,19 +40,19 @@ /* LED */ #define CONFIG_LED_ONOFF_STATES -#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10 +#define CONFIG_LED_ONOFF_STATES_BAT_LOW 10 -#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_ACCEL I2C_PORT_SENSOR /* Sensors */ #define CONFIG_CMD_ACCELS #define CONFIG_CMD_ACCEL_INFO #define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT -#define CONFIG_ACCEL_BMA255 /* Lid accel */ +#define CONFIG_ACCEL_BMA255 /* Lid accel */ #define CONFIG_ACCEL_LIS2DWL #define CONFIG_ACCEL_KX022 -#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ +#define CONFIG_ACCELGYRO_BMI160 /* Base accel */ #define CONFIG_ACCELGYRO_ICM42607 #define CONFIG_ACCELGYRO_BMI220 #define CONFIG_I2C_XFER_LARGE_TRANSFER @@ -57,7 +60,7 @@ /* Lid operates in forced mode, base in FIFO */ #define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) #define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ +#define CONFIG_ACCEL_FIFO_SIZE 256 /* Must be a power of 2 */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) #define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ @@ -95,12 +98,10 @@ #define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B /* USB Mux and Retimer */ -#define CONFIG_USB_MUX_IT5205 /* C1: ITE Mux */ -#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* Required for ITE Mux */ - -#define CONFIG_USBC_RETIMER_TUSB544 /* C1 Redriver: TUSB544 */ - +#define CONFIG_USB_MUX_IT5205 /* C1: ITE Mux */ +#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* Required for ITE Mux */ +#define CONFIG_USBC_RETIMER_TUSB544 /* C1 Redriver: TUSB544 */ #ifndef __ASSEMBLER__ @@ -113,22 +114,15 @@ enum chg_id { CHARGER_NUM, }; - - /* Motion sensors */ -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; +enum sensor_id { LID_ACCEL, BASE_ACCEL, BASE_GYRO, SENSOR_COUNT }; /* ADC channels */ enum adc_channel { - ADC_VSNS_PP3300_A, /* ADC0 */ - ADC_TEMP_SENSOR_1, /* ADC2 */ - ADC_TEMP_SENSOR_2, /* ADC3 */ - ADC_TEMP_SENSOR_3, /* ADC15*/ + ADC_VSNS_PP3300_A, /* ADC0 */ + ADC_TEMP_SENSOR_1, /* ADC2 */ + ADC_TEMP_SENSOR_2, /* ADC3 */ + ADC_TEMP_SENSOR_3, /* ADC15*/ ADC_CH_COUNT }; diff --git a/board/storo/build.mk b/board/storo/build.mk index 8167ca9966..01b890bf29 100644 --- a/board/storo/build.mk +++ b/board/storo/build.mk @@ -1,5 +1,5 @@ # -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. +# Copyright 2021 The ChromiumOS Authors # Use of this source code is governed by a BSD-style license that can be # found in the LICENSE file. # diff --git a/board/storo/cbi_ssfc.c b/board/storo/cbi_ssfc.c index c4b859f133..81f3ee0dad 100644 --- a/board/storo/cbi_ssfc.c +++ b/board/storo/cbi_ssfc.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -27,10 +27,10 @@ DECLARE_HOOK(HOOK_INIT, cbi_ssfc_init, HOOK_PRIO_FIRST); enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void) { - return (enum ec_ssfc_base_sensor) cached_ssfc.base_sensor; + return (enum ec_ssfc_base_sensor)cached_ssfc.base_sensor; } enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void) { - return (enum ec_ssfc_lid_sensor) cached_ssfc.lid_sensor; + return (enum ec_ssfc_lid_sensor)cached_ssfc.lid_sensor; } diff --git a/board/storo/cbi_ssfc.h b/board/storo/cbi_ssfc.h index f4a51b8e91..bc6bc92286 100644 --- a/board/storo/cbi_ssfc.h +++ b/board/storo/cbi_ssfc.h @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -57,5 +57,4 @@ enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void); */ enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void); - #endif /* _DEDEDE_CBI_SSFC__H_ */ diff --git a/board/storo/ec.tasklist b/board/storo/ec.tasklist index d54ff847e6..8abd36b4be 100644 --- a/board/storo/ec.tasklist +++ b/board/storo/ec.tasklist @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ diff --git a/board/storo/gpio.inc b/board/storo/gpio.inc index b7541c5259..cb07474f52 100644 --- a/board/storo/gpio.inc +++ b/board/storo/gpio.inc @@ -1,6 +1,6 @@ /* -*- mode:c -*- * - * Copyright 2021 The Chromium OS Authors. All rights reserved. + * Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ diff --git a/board/storo/led.c b/board/storo/led.c index d5094f1f30..76bfc05861 100644 --- a/board/storo/led.c +++ b/board/storo/led.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * @@ -10,28 +10,37 @@ #include "led_common.h" #include "led_onoff_states.h" -#define LED_OFF_LVL 1 -#define LED_ON_LVL 0 +#define LED_OFF_LVL 1 +#define LED_ON_LVL 0 __override const int led_charge_lvl_1 = 5; __override const int led_charge_lvl_2 = 95; __override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0_BAT_LOW] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC}, - {LED_OFF, 3 * LED_ONE_SEC} }, - [STATE_DISCHARGE_S3] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC}, - {LED_OFF, 3 * LED_ONE_SEC} }, - [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_AMBER, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_FACTORY_TEST] = {{EC_LED_COLOR_WHITE, 2 * LED_ONE_SEC}, - {EC_LED_COLOR_AMBER, 2 * LED_ONE_SEC} }, -}; + led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { + [STATE_CHARGING_LVL_1] = { { EC_LED_COLOR_AMBER, + LED_INDEFINITE } }, + [STATE_CHARGING_LVL_2] = { { EC_LED_COLOR_AMBER, + LED_INDEFINITE } }, + [STATE_CHARGING_FULL_CHARGE] = { { EC_LED_COLOR_WHITE, + LED_INDEFINITE } }, + [STATE_DISCHARGE_S0] = { { EC_LED_COLOR_WHITE, + LED_INDEFINITE } }, + [STATE_DISCHARGE_S0_BAT_LOW] = { { EC_LED_COLOR_AMBER, + 1 * LED_ONE_SEC }, + { LED_OFF, 3 * LED_ONE_SEC } }, + [STATE_DISCHARGE_S3] = { { EC_LED_COLOR_WHITE, + 1 * LED_ONE_SEC }, + { LED_OFF, 3 * LED_ONE_SEC } }, + [STATE_DISCHARGE_S5] = { { LED_OFF, LED_INDEFINITE } }, + [STATE_BATTERY_ERROR] = { { EC_LED_COLOR_AMBER, + 1 * LED_ONE_SEC }, + { LED_OFF, 1 * LED_ONE_SEC } }, + [STATE_FACTORY_TEST] = { { EC_LED_COLOR_WHITE, + 2 * LED_ONE_SEC }, + { EC_LED_COLOR_AMBER, + 2 * LED_ONE_SEC } }, + }; const enum ec_led_id supported_led_ids[] = { EC_LED_ID_BATTERY_LED, diff --git a/board/storo/usb_pd_policy.c b/board/storo/usb_pd_policy.c index 15faf41ffc..83c09bb99e 100644 --- a/board/storo/usb_pd_policy.c +++ b/board/storo/usb_pd_policy.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -11,8 +11,8 @@ #include "driver/tcpm/tcpci.h" #include "usb_pd.h" -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) +#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ##args) +#define CPRINTS(format, args...) cprints(CC_USBPD, format, ##args) int pd_check_vconn_swap(int port) { |