diff options
Diffstat (limited to 'board/taniks/gpio.inc')
| -rw-r--r-- | board/taniks/gpio.inc | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/board/taniks/gpio.inc b/board/taniks/gpio.inc new file mode 100644 index 0000000000..9984ebc55e --- /dev/null +++ b/board/taniks/gpio.inc @@ -0,0 +1,146 @@ +/* -*- mode:c -*- + * + * Copyright 2021 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#define MODULE_KB MODULE_KEYBOARD_SCAN + +/* INTERRUPT GPIOs: */ +GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) +GPIO_INT(EC_ACCEL_INT_R_L, PIN(8, 1), GPIO_SEL_1P8V | GPIO_INT_FALLING, motion_interrupt) +GPIO_INT(EC_IMU_INT_R_L, PIN(5, 6), GPIO_SEL_1P8V | GPIO_INT_FALLING, lsm6dso_interrupt) +GPIO_INT(EC_PROCHOT_IN_L, PIN(2, 4), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt) +GPIO_INT(EC_VOLDN_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) +GPIO_INT(EC_VOLUP_BTN_ODL, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) +GPIO_INT(EC_WP_ODL, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) +GPIO_INT(GSC_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW, power_button_interrupt) +GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) +GPIO_INT(SEQ_EC_ALL_SYS_PG, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SEQ_EC_DSW_PWROK, PIN(2, 2), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SEQ_EC_RSMRST_ODL, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_SUS_L, PIN(2, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SYS_SLP_S0IX_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(TABLET_MODE_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr) +GPIO_INT(USB_C0_BC12_INT_ODL, PIN(C, 6), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C0_TCPC_INT_ODL, PIN(2, 3), GPIO_INT_FALLING, tcpc_alert_event) +GPIO_INT(USB_C0_PPC_INT_ODL, PIN(6, 2), GPIO_INT_FALLING, ppc_interrupt) +GPIO_INT(USB_C1_BC12_INT_ODL, PIN(5, 0), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(A, 2), GPIO_INT_FALLING, tcpc_alert_event) +GPIO_INT(USB_C1_PPC_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, ppc_interrupt) + +/* USED GPIOs: */ +GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_INPUT) +GPIO(CHARGER_VAP_OTG_EN, PIN(7, 3), GPIO_OUT_LOW) +GPIO(CPU_C10_GATE_L, PIN(6, 7), GPIO_INPUT) +GPIO(EC_BATT_PRES_ODL, PIN(A, 3), GPIO_INPUT) +GPIO(EC_ENTERING_RW, PIN(0, 3), GPIO_OUT_LOW) +GPIO(EC_EN_EDP_BL, PIN(D, 3), GPIO_OUT_HIGH) +GPIO(EC_GSC_PACKET_MODE, PIN(7, 5), GPIO_OUT_LOW) +GPIO(EC_I2C_BAT_SCL, PIN(3, 3), GPIO_INPUT) +GPIO(EC_I2C_BAT_SDA, PIN(3, 6), GPIO_INPUT) +GPIO(EC_I2C_MISC_SCL_R, PIN(B, 3), GPIO_INPUT) +GPIO(EC_I2C_MISC_SDA_R, PIN(B, 2), GPIO_INPUT) +GPIO(EC_I2C_SENSOR_SCL, PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C_SENSOR_SDA, PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V) +GPIO(EC_I2C_USB_C0_PPC_BC_SCL, PIN(9, 2), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_PPC_BC_SDA, PIN(9, 1), GPIO_INPUT) +GPIO(EC_I2C_KBMCU_SCL, PIN(D, 1), GPIO_INPUT) +GPIO(EC_I2C_KBMCU_SDA, PIN(D, 0), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_TCPC_SCL, PIN(9, 0), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_TCPC_SDA, PIN(8, 7), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_MIX_SCL, PIN(E, 4), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_MIX_SDA, PIN(E, 3), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_TCPC_SCL, PIN(F, 3), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_TCPC_SDA, PIN(F, 2), GPIO_INPUT) +GPIO(EC_KB_BL_EN_L, PIN(8, 6), GPIO_OUT_HIGH) +GPIO(EC_PCHHOT_ODL, PIN(7, 4), GPIO_INPUT) +GPIO(EC_PCH_INT_ODL, PIN(B, 0), GPIO_ODR_HIGH) +GPIO(EC_PCH_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH) +GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_SYS_PWROK, PIN(2, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_WAKE_R_ODL, PIN(C, 0), GPIO_ODR_HIGH) +GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) +GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_LOW) +GPIO(EN_PP5000_USBA_R, PIN(D, 7), GPIO_OUT_LOW) +GPIO(EN_S5_RAILS, PIN(B, 6), GPIO_OUT_LOW) +GPIO(IMVP9_VRRDY_OD, PIN(3, 0), GPIO_INPUT) +GPIO(PCH_PWROK, PIN(7, 2), GPIO_OUT_LOW) +GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) +GPIO(USB_C0_TCPC_RST_ODL, PIN(A, 7), GPIO_ODR_LOW) +GPIO(USB_C1_FRS_EN, PIN(9, 4), GPIO_OUT_LOW) +GPIO(USB_C1_RT_INT_ODL, PIN(A, 0), GPIO_INPUT) +GPIO(USB_C1_RT_RST_R_ODL, PIN(0, 2), GPIO_ODR_HIGH) +GPIO(VCCST_PWRGD_OD, PIN(A, 4), GPIO_ODR_LOW) +GPIO(KBMCU_INT_ODL, PIN(7, 0), GPIO_INPUT) + +/* UART alternate functions */ +ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* GPIO64/CR_SIN1, GPO65/CR_SOUT1/FLPRG1_L */ + +/* I2C alternate functions */ +ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* GPIO33/I2C5_SCL0/CTS_L, GPIO36/RTS_L/I2C5_SDA0 */ +ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* GPIO87/I2C1_SDA0 */ +ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* GPIO92/I2C2_SCL0, GPIO91/I2C2_SDA0, GPIO90/I2C1_SCL0 */ +ALTERNATE(PIN_MASK(B, 0x0c), 0, MODULE_I2C, 0) /* GPIOB3/I2C7_SCL0/DCD_L, GPIOB2/I2C7_SDA0/DSR_L */ +ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, GPIO_SEL_1P8V) /* GPIOB5/I2C0_SCL0, GPIOB4/I2C0_SDA0 */ +ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* GPIOD1/I2C3_SCL0, GPIOD0/I2C3_SDA0 */ +ALTERNATE(PIN_MASK(E, 0x18), 0, MODULE_I2C, 0) /* GPIOE4/I2C6_SCL1/I3C_SCL, GPIOE3/I2C6_SDA1/I3C_SDA */ +ALTERNATE(PIN_MASK(F, 0x0c), 0, MODULE_I2C, 0) /* GPIOF3/I2C4_SCL1, GPIOF2/I2C4_SDA1 */ + +/* PWM alternate functions */ +ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* GPIO40/TA1 */ +ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* GPIO80/PWM3 */ +ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* GPIOB7/PWM5 */ + +/* ADC alternate functions */ +ALTERNATE(PIN_MASK(3, 0x10), 0, MODULE_ADC, 0) /* GPIO34/PS2_DAT2/ADC6 */ +ALTERNATE(PIN_MASK(4, 0x24), 0, MODULE_ADC, 0) /* GPIO42/ADC3/RI_L, GPIO45/ADC0 */ +ALTERNATE(PIN_MASK(E, 0x02), 0, MODULE_ADC, 0) /* GPIOE1/ADC7 */ + +/* KB alternate functions */ +ALTERNATE(PIN_MASK(0, 0xf0), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO10&P80_CLK/GPIO07, KSO11&P80_DAT/GPIO06, KSO12/GPIO05, KSO13/GPIO04 */ +ALTERNATE(PIN_MASK(1, 0x7f), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO06/GPO13/GP_SEL_L, KSO07/GPO12/JEN_L, KSO03/GPIO16/JTAG_TDO0_SWO, KSO04/GPIO15/XNOR, KSO05/GPIO14, KSO08/GPIO11/CR_SOUT1, KSO09/GPIO10/CR_SIN1 */ +ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO00/GPIO21/JTAG_TCK_SWCLK, KSO01/GPIO20/JTAG_TMS_SWIO */ +ALTERNATE(PIN_MASK(3, 0x80), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* GPIO37/PS2_CLK2/ADC5 */ +ALTERNATE(PIN_MASK(4, 0x1a), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* GPIO44/ADC1, GPIO43/ADC2, GPIO41/ADC4 */ +ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO14/GPIO82 */ +ALTERNATE(PIN_MASK(C, 0x80), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* GPIOC7/DTR_L_BOUT/ADC11 */ +ALTERNATE(PIN_MASK(E, 0x01), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* GPIOE0/ADC10 */ +ALTERNATE(PIN_MASK(F, 0x03), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* GPIOF1/ADC8, GPIOF0/ADC9 */ + +/* PMU alternate functions */ +ALTERNATE(PIN_MASK(0, 0x01), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN2_L&GPI00/GPIO00 */ +ALTERNATE(PIN_MASK(0, 0x02), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW) /* GPIO01/PSL_IN3_L&GPI01 */ +ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN1_L&GPID2/GPIOD2 */ + +/* Unused Pins */ +UNUSED(PIN(B, 1)) /* KSO17/GPIOB1/CR_SIN4 */ +UNUSED(PIN(D, 4)) /* GPIOD4/CR_SIN3 */ +UNUSED(PIN(D, 6)) /* GPOD6/CR_SOUT3/SHDF_ESPI_L */ +UNUSED(PIN(3, 2)) /* GPO32/TRIS_L */ +UNUSED(PIN(3, 5)) /* GPO35/CR_SOUT4/TEST_L */ +UNUSED(PIN(4, 1)) /* GPIO41/ADC4 */ +UNUSED(PIN(6, 6)) /* GPIO66 */ +UNUSED(PIN(5, 7)) /* GPIO57/SER_IRQ/ESPI_ALERT_L */ + +/* Pre-configured PSL balls: J8 K6 */ + +/* + * The NPCX keyboard driver does not use named GPIOs to access + * keyboard scan pins, so we do not list them in *gpio.inc. However, when + * KEYBOARD_COL2_INVERTED is defined, this name is required. + */ +GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) + +/* GPIO02_P2 to PU */ +/* GPIO03_P2 to PU */ +IOEX(USB_C0_OC_ODL, EXPIN(IOEX_C0_NCT38XX, 0, 4), GPIO_ODR_HIGH) +IOEX(USB_C0_FRS_EN, EXPIN(IOEX_C0_NCT38XX, 0, 6), GPIO_LOW) + +/* LED */ +GPIO(LED_1_L, PIN(C, 4), GPIO_OUT_HIGH) /* Battery - Red LED */ +GPIO(LED_2_L, PIN(C, 3), GPIO_OUT_HIGH) /* Battery - Green LED */ +GPIO(LED_3_L, PIN(C, 2), GPIO_OUT_HIGH) /* Power - White LED */ |