1 files changed, 0 insertions, 140 deletions
diff --git a/board/tigertail/board.h b/board/tigertail/board.h
deleted file mode 100644
index 3b15c4c774..0000000000
--- a/board/tigertail/board.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* Copyright 2017 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Tigertail configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* 48 MHz SYSCLK clock frequency */
-#define CPU_CLOCK 48000000
-
-/* Enable USART1 USB streams */
-#define CONFIG_STREAM_USART
-#define CONFIG_STREAM_USART1
-#define CONFIG_STREAM_USB
-#define CONFIG_CMD_USART_INFO
-
-/* The UART console is on USART1 (PA9/PA10) */
-#undef CONFIG_UART_CONSOLE
-#define CONFIG_UART_CONSOLE 2
-#undef CONFIG_UART_TX_DMA
-#undef CONFIG_UART_RX_DMA
-
-/* Optional features */
-#define CONFIG_STM_HWTIMER32
-#define CONFIG_HW_CRC
-
-/* USB Configuration */
-#define CONFIG_USB
-#define CONFIG_USB_PID 0x5027
-#define CONFIG_USB_CONSOLE
-#define CONFIG_USB_UPDATE
-
-#undef CONFIG_USB_MAXPOWER_MA
-#define CONFIG_USB_MAXPOWER_MA 100
-
-#define CONFIG_USB_SERIALNO
-#define DEFAULT_SERIALNO "Uninitialized"
-
-/* USB interface indexes (use define rather than enum to expand them) */
-#define USB_IFACE_CONSOLE	0
-#define USB_IFACE_UPDATE	1
-#define USB_IFACE_USART1_STREAM	2
-#define USB_IFACE_I2C		3
-#define USB_IFACE_COUNT		4
-
-/* USB endpoint indexes (use define rather than enum to expand them) */
-#define USB_EP_CONTROL		0
-#define USB_EP_CONSOLE		1
-#define USB_EP_UPDATE		2
-#define USB_EP_USART1_STREAM	3
-#define USB_EP_I2C		4
-#define USB_EP_COUNT		5
-
-/* Enable console recasting of GPIO type. */
-#define CONFIG_CMD_GPIO_EXTENDED
-
-/* This is not actually an EC so disable some features. */
-#undef CONFIG_WATCHDOG_HELP
-#undef CONFIG_LID_SWITCH
-
-/* Enable control of I2C over USB */
-#define CONFIG_USB_I2C
-#define CONFIG_I2C
-#define CONFIG_I2C_CONTROLLER
-#define I2C_PORT_MASTER 0
-#define CONFIG_INA231
-
-/* Enable ADC */
-#define CONFIG_ADC
-
-/*
- * Allow dangerous commands all the time, since we don't have a write protect
- * switch.
- */
-#define CONFIG_SYSTEM_UNLOCKED
-
-
-#ifndef __ASSEMBLER__
-
-/* Timer selection */
-#define TIM_CLOCK32 2
-#define TIM_ADC     3
-
-
-
-#include "gpio_signal.h"
-
-/* USB string indexes */
-enum usb_strings {
-	USB_STR_DESC = 0,
-	USB_STR_VENDOR,
-	USB_STR_PRODUCT,
-	USB_STR_SERIALNO,
-	USB_STR_VERSION,
-	USB_STR_I2C_NAME,
-	USB_STR_USART1_STREAM_NAME,
-	USB_STR_CONSOLE_NAME,
-	USB_STR_UPDATE_NAME,
-
-	USB_STR_COUNT
-};
-
-/* ADC signal */
-enum adc_channel {
-	ADC_SBU1 = 0,
-	ADC_SBU2,
-	/* Number of ADC channels */
-	ADC_CH_COUNT
-};
-
-void set_uart_state(int state);
-
-enum uart_states {
-	UART_OFF = 0,
-	UART_ON_PP1800,
-	UART_FLIP_PP1800,
-	UART_ON_PP3300,
-	UART_FLIP_PP3300,
-	UART_AUTO,
-};
-
-enum uart_detect_states {
-	UART_DETECT_OFF = 0,
-	UART_DETECT_AUTO,
-};
-
-void set_mux_state(int state);
-enum mux_states {
-	MUX_OFF = 0,
-	MUX_A,
-	MUX_B,
-};
-
-void button_interrupt(enum gpio_signal signal);
-
-#endif /* !__ASSEMBLER__ */
-#endif /* __CROS_EC_BOARD_H */