diff options
Diffstat (limited to 'board/trembyle/board.h')
| -rw-r--r-- | board/trembyle/board.h | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/board/trembyle/board.h b/board/trembyle/board.h deleted file mode 100644 index bfbd829ac1..0000000000 --- a/board/trembyle/board.h +++ /dev/null @@ -1,218 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Trembyle board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_ZORK_TREMBYLE - -#include <stdbool.h> -#include "baseboard.h" - -#define CONFIG_USBC_RETIMER_PI3DPX1207 - -/* Motion sensing drivers */ -#define CONFIG_ACCELGYRO_BMI160 -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCEL_KX022 -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_TABLET_MODE -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -/* GPIO mapping from board specific name to EC common name. */ -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_SCI_GPIO GPIO_EC_FCH_SCI_ODL -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_AP_INT_ODL -#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_EDP_BL_DISABLE -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#define GPIO_PCH_PWRBTN_L GPIO_EC_FCH_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_EC_FCH_RSMRST_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_FCH_PWROK -#define GPIO_PCH_WAKE_L GPIO_EC_FCH_WAKE_L -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_S0_PGOOD GPIO_S0_PWROK_OD -#define GPIO_S5_PGOOD GPIO_EC_PWROK_OD -#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_WP_L GPIO_EC_WP_L -#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE - -#ifndef __ASSEMBLER__ - -enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, - ADC_TEMP_SENSOR_SOC, - ADC_CH_COUNT -}; - -enum battery_type { - BATTERY_AP18F4M, - BATTERY_TYPE_COUNT, -}; - -enum mft_channel { - MFT_CH_0 = 0, - /* Number of MFT channels */ - MFT_CH_COUNT, -}; - -enum pwm_channel { - PWM_CH_KBLIGHT = 0, - PWM_CH_FAN, - PWM_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER = 0, - TEMP_SENSOR_SOC, - TEMP_SENSOR_CPU, - TEMP_SENSOR_COUNT -}; - -enum usba_port { - USBA_PORT_A0 = 0, - USBA_PORT_A1, - USBA_PORT_COUNT -}; - -/***************************************************************************** - * CBI EC FW Configuration - */ - -/** - * TREMBYLE_MB_USBAC - * USB-A0 Speed: 10 Gbps - * Retimer: PS8811 - * USB-C0 Speed: 10 Gbps - * Retimer: PI3DPX1207 - * TCPC: NCT3807 - * PPC: AOZ1380 - * IOEX: TCPC - */ -enum ec_cfg_usb_mb_type { - TREMBYLE_MB_USBAC = 0, -}; - -/** - * TREMBYLE_DB_T_OPT1_USBAC_HMDI - * USB-A1 Speed: 10 Gbps - * Retimer: PS8811 - * USB-C1 Speed: 10 Gbps - * Retimer: PS8818 - * TCPC: NCT3807 - * PPC: NX20P3483 - * IOEX: TCPC - * HDMI Exists: yes - * Retimer: PI3HDX1204 - * MST Hub: none - * - * TREMBYLE_DB_T_OPT2_USBAC - * USB-A1 Speed: 10 Gbps - * Retimer: PS8811 - * USB-C1 Speed: 10 Gbps - * Retimer: PS8802 - * TCPC: NCT3807 - * PPC: NX20P3483 - * IOEX: TCPC - * HDMI Exists: no - * Retimer: none - * MST Hub: none - * - * TREMBYLE_DB_T_OPT3_USBAC_HDMI_MSTHUB - * USB-A1 Speed: 10 Gbps - * Retimer: PS8811 - * USB-C1 Speed: 10 Gbps - * Retimer: PS8802 - * TCPC: NCT3807 - * PPC: NX20P3483 - * IOEX: TCPC - * HDMI Exists: yes - * Retimer: none - * MST Hub: RTD2141B - */ -enum ec_cfg_usb_db_type { - TREMBYLE_DB_T_OPT1_USBAC_HMDI = 0, - TREMBYLE_DB_T_OPT2_USBAC = 1, - TREMBYLE_DB_T_OPT3_USBAC_HDMI_MSTHUB = 2, -}; - -#include "cbi_ec_fw_config.h" - -#define HAS_USBC1_RETIMER_PS8802 \ - (BIT(TREMBYLE_DB_T_OPT2_USBAC) | \ - BIT(TREMBYLE_DB_T_OPT3_USBAC_HDMI_MSTHUB)) - -static inline bool ec_config_has_usbc1_retimer_ps8802(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8802); -} - -#define HAS_USBC1_RETIMER_PS8818 \ - (BIT(TREMBYLE_DB_T_OPT1_USBAC_HMDI)) - -static inline bool ec_config_has_usbc1_retimer_ps8818(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_USBC1_RETIMER_PS8818); -} - -#define HAS_HDMI_RETIMER_PI3HDX1204 \ - (BIT(TREMBYLE_DB_T_OPT1_USBAC_HMDI)) - -static inline bool ec_config_has_hdmi_retimer_pi3hdx1204(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_HDMI_RETIMER_PI3HDX1204); -} - -#define HAS_MST_HUB_RTD2141B \ - (BIT(TREMBYLE_DB_T_OPT3_USBAC_HDMI_MSTHUB)) - -static inline bool ec_config_has_mst_hub_rtd2141b(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_MST_HUB_RTD2141B); -} - -#define HAS_HDMI_CONN_HPD \ - (BIT(TREMBYLE_DB_T_OPT1_USBAC_HMDI)) - -static inline bool ec_config_has_hdmi_conn_hpd(void) -{ - return !!(BIT(ec_config_get_usb_db()) & - HAS_HDMI_CONN_HPD); -} - -#define PORT_TO_HPD(port) ((port == 0) \ - ? GPIO_USB_C0_HPD \ - : (ec_config_has_usbc1_retimer_ps8802()) \ - ? GPIO_DP1_HPD \ - : GPIO_DP2_HPD) - -extern const struct usb_mux usbc0_pi3dpx1207_usb_retimer; -extern const struct usb_mux usbc1_ps8802; -extern const struct usb_mux usbc1_ps8818; -extern struct usb_mux usbc1_amd_fp5_usb_mux; - -void hdmi_hpd_interrupt(enum ioex_signal signal); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |