diff options
Diffstat (limited to 'board/trondo/board.h')
| -rw-r--r-- | board/trondo/board.h | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/board/trondo/board.h b/board/trondo/board.h new file mode 100644 index 0000000000..4e386d1a46 --- /dev/null +++ b/board/trondo/board.h @@ -0,0 +1,156 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Volteer board configuration */ + +#ifndef __CROS_EC_BOARD_H +#define __CROS_EC_BOARD_H + +/* Baseboard features */ +#include "baseboard.h" + +/* Optional features */ +#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands while in dev. */ + +#define CONFIG_POWER_BUTTON + +#undef CONFIG_UART_TX_BUF_SIZE +#define CONFIG_UART_TX_BUF_SIZE 4096 + +/* LED defines */ +#define CONFIG_LED_PWM +/* Although there are 2 LEDs, they are both controlled by the same lines. */ +#define CONFIG_LED_PWM_COUNT 1 + +/* Keyboard features */ + +/* Sensors */ +/* BMA253 accelerometer in base */ +#define CONFIG_ACCEL_BMA255 + +/* BMI260 accel/gyro in base */ +#define CONFIG_ACCELGYRO_BMI260 +#define CONFIG_ACCELGYRO_BMI260_INT_EVENT \ + TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) + +/* TCS3400 ALS */ +#define CONFIG_ALS +#define ALS_COUNT 1 +#define CONFIG_ALS_TCS3400 +#define CONFIG_ALS_TCS3400_INT_EVENT \ + TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS) + +/* Sensors without hardware FIFO are in forced mode */ +#define CONFIG_ACCEL_FORCE_MODE_MASK \ + (BIT(LID_ACCEL) | BIT(CLEAR_ALS)) + +/* USB Type C and USB PD defines */ +/* + * USB-C port's USB2 & USB3 mapping from schematics + * USB2 numbering on PCH - 1 to n + * USB3 numbering on AP - 0 to n (PMC's USB3 numbering for MUX + * configuration is - 1 to n hence add +1) + */ +#define USBC_PORT_0_USB2_NUM 9 +#define USBC_PORT_0_USB3_NUM 1 +#define USBC_PORT_1_USB2_NUM 4 +#define USBC_PORT_1_USB3_NUM 2 + +/* Enabling Thunderbolt-compatible mode */ +#define CONFIG_USB_PD_TBT_COMPAT_MODE + +/* Enabling USB4 mode */ +#define CONFIG_USB_PD_USB4 + +/* USB Type A Features */ + +/* BC 1.2 */ + +/* Volume Button feature */ + +/* Fan features */ + +/* + * Macros for GPIO signals used in common code that don't match the + * schematic names. Signal names in gpio.inc match the schematic and are + * then redefined here to so it's more clear which signal is being used for + * which purpose. + */ +#define GPIO_AC_PRESENT GPIO_ACOK_OD +#define GPIO_EC_INT_L GPIO_EC_PCH_INT_ODL +#define GPIO_EN_PP5000 GPIO_EN_PP5000_A +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_LID_OPEN GPIO_EC_LID_OPEN +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_PCH_WAKE_L GPIO_EC_PCH_WAKE_ODL +#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL +#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_ODL +#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST +#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L +#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L +#define GPIO_PG_EC_DSW_PWROK GPIO_DSW_PWROK +#define GPIO_POWER_BUTTON_L GPIO_H1_EC_PWR_BTN_ODL +#define GPIO_RSMRST_L_PGOOD GPIO_PG_EC_RSMRST_ODL +#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL +#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL +#define GPIO_WP_L GPIO_EC_WP_L +#define GPIO_USB_C1_BC12_INT_ODL GPIO_USB_C1_MIX_INT_ODL +#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL +#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL +#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L + +/* I2C Bus Configuration */ +#define CONFIG_I2C +#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0 +#define I2C_PORT_USB_C1 NPCX_I2C_PORT2_0 +#define I2C_PORT_USB_1_MIX NPCX_I2C_PORT3_0 +#define I2C_PORT_POWER NPCX_I2C_PORT5_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 + +#define I2C_PORT_BATTERY I2C_PORT_POWER +#define I2C_PORT_CHARGER I2C_PORT_EEPROM + +#define I2C_ADDR_EEPROM_FLAGS 0x50 +#define CONFIG_I2C_MASTER + + +#ifndef __ASSEMBLER__ + +#include "gpio_signal.h" +#include "registers.h" + +enum battery_type { + BATTERY_LGC011, + BATTERY_TYPE_COUNT, +}; + +enum pwm_channel { + PWM_CH_LED1_BLUE = 0, + PWM_CH_LED2_GREEN, + PWM_CH_LED3_RED, + PWM_CH_LED4_SIDESEL, + PWM_CH_FAN, + PWM_CH_KBLIGHT, + PWM_CH_COUNT +}; + +enum sensor_id { + LID_ACCEL = 0, + BASE_ACCEL, + BASE_GYRO, + CLEAR_ALS, + RGB_ALS, + VSYNC, + SENSOR_COUNT, +}; + +/* TODO: b/143375057 - Remove this code after power on. */ +void c10_gate_change(enum gpio_signal signal); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __CROS_EC_BOARD_H */ |