diff options
Diffstat (limited to 'board/twinkie/gpio.inc')
| -rw-r--r-- | board/twinkie/gpio.inc | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/board/twinkie/gpio.inc b/board/twinkie/gpio.inc deleted file mode 100644 index 551cb73748..0000000000 --- a/board/twinkie/gpio.inc +++ /dev/null @@ -1,50 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2014 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(CC2_ALERT_L, PIN(A, 7), GPIO_INT_BOTH | GPIO_PULL_UP, cc2_event) -GPIO_INT(VBUS_ALERT_L, PIN(B, 2), GPIO_INT_BOTH | GPIO_PULL_UP, vbus_event) - -GPIO(CC1_EN, PIN(A, 0), GPIO_OUT_HIGH) -GPIO(CC1_PD, PIN(A, 1), GPIO_ANALOG) -GPIO(CC2_EN, PIN(A, 2), GPIO_OUT_HIGH) -GPIO(CC2_PD, PIN(A, 3), GPIO_ANALOG) -GPIO(DAC, PIN(A, 4), GPIO_ANALOG) -GPIO(CC2_TX_DATA, PIN(A, 6), GPIO_OUT_LOW) - -GPIO(CC1_RA, PIN(A, 8), GPIO_ODR_HIGH) -GPIO(USB_DM, PIN(A, 11), GPIO_ANALOG) -GPIO(USB_DP, PIN(A, 12), GPIO_ANALOG) -GPIO(CC1_RPUSB, PIN(A, 13), GPIO_ODR_HIGH) -GPIO(CC1_RP1A5, PIN(A, 14), GPIO_ODR_HIGH) -GPIO(CC1_RP3A0, PIN(A, 15), GPIO_ODR_HIGH) -GPIO(CC2_RPUSB, PIN(B, 0), GPIO_ODR_HIGH) - -GPIO(CC1_TX_EN, PIN(B, 1), GPIO_OUT_LOW) -GPIO(CC2_TX_EN, PIN(B, 3), GPIO_OUT_LOW) -GPIO(CC1_TX_DATA, PIN(B, 4), GPIO_OUT_LOW) -GPIO(CC1_RD, PIN(B, 5), GPIO_ODR_HIGH) -GPIO(I2C_SCL, PIN(B, 6), GPIO_INPUT) -GPIO(I2C_SDA, PIN(B, 7), GPIO_INPUT) -GPIO(CC2_RD, PIN(B, 8), GPIO_ODR_HIGH) -GPIO(LED_G_L, PIN(B, 11), GPIO_ODR_HIGH) -GPIO(LED_R_L, PIN(B, 13), GPIO_ODR_HIGH) -GPIO(LED_B_L, PIN(B, 14), GPIO_ODR_HIGH) -GPIO(CC2_RA, PIN(B, 15), GPIO_ODR_HIGH) -GPIO(CC2_RP1A5, PIN(C, 14), GPIO_ODR_HIGH) -GPIO(CC2_RP3A0, PIN(C, 15), GPIO_ODR_HIGH) - -/* Unimplemented signals which we need to emulate for now */ -UNIMPLEMENTED(ENTERING_RW) -UNIMPLEMENTED(WP_L) - -ALTERNATE(PIN_MASK(A, 0x0020), 0, MODULE_USB_PD, 0) /* SPI1: SCK(PA5) */ -ALTERNATE(PIN_MASK(B, 0x0200), 2, MODULE_USB_PD, 0) /* TIM17_CH1: PB9 */ -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, GPIO_PULL_UP) /* USART1: PA9/PA10 */ -ALTERNATE(PIN_MASK(B, 0x00C0), 1, MODULE_I2C, 0) /* I2C1 MASTER:PB6/7 */ |