summaryrefslogtreecommitdiff
path: root/board/woomax/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/woomax/board.c')
-rw-r--r--board/woomax/board.c410
1 files changed, 262 insertions, 148 deletions
diff --git a/board/woomax/board.c b/board/woomax/board.c
index e45fd91623..747c576fc2 100644
--- a/board/woomax/board.c
+++ b/board/woomax/board.c
@@ -1,4 +1,4 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
+/* Copyright 2020 The ChromiumOS Authors
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
@@ -19,7 +19,7 @@
#include "driver/retimer/pi3hdx1204.h"
#include "driver/retimer/ps8802.h"
#include "driver/retimer/ps8811.h"
-#include "driver/retimer/ps8818.h"
+#include "driver/retimer/ps8818_public.h"
#include "driver/temp_sensor/sb_tsi.h"
#include "driver/usb_mux/amd_fp5.h"
#include "extpower.h"
@@ -44,8 +44,8 @@
#include "gpio_list.h"
-#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
-#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ##args)
+#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ##args)
/* Motion sensors */
static struct mutex g_lid_mutex;
@@ -64,15 +64,15 @@ static const mat33_fp_t lid_standard_ref = {
};
static const mat33_fp_t base_standard_ref = {
- { 0, FLOAT_TO_FP(-1), 0},
- { FLOAT_TO_FP(-1), 0, 0},
- { 0, 0, FLOAT_TO_FP(-1)},
+ { 0, FLOAT_TO_FP(-1), 0 },
+ { FLOAT_TO_FP(-1), 0, 0 },
+ { 0, 0, FLOAT_TO_FP(-1) },
};
static const mat33_fp_t base_standard_ref_icm = {
- { FLOAT_TO_FP(1), 0, 0},
- { 0, FLOAT_TO_FP(-1), 0},
- { 0, 0, FLOAT_TO_FP(-1)},
+ { FLOAT_TO_FP(1), 0, 0 },
+ { 0, FLOAT_TO_FP(-1), 0 },
+ { 0, 0, FLOAT_TO_FP(-1) },
};
/* TODO(gcc >= 5.0) Remove the casts to const pointer at rot_standard_ref */
@@ -294,8 +294,8 @@ static void board_chipset_resume(void)
int val;
rv = i2c_read8(I2C_PORT_USBA0,
- PS8811_I2C_ADDR_FLAGS3 + PS8811_REG_PAGE1,
- PS8811_REG1_USB_BEQ_LEVEL, &val);
+ PS8811_I2C_ADDR_FLAGS3 + PS8811_REG_PAGE1,
+ PS8811_REG1_USB_BEQ_LEVEL, &val);
if (!rv)
break;
}
@@ -307,8 +307,7 @@ static void board_chipset_resume(void)
if (ec_config_has_hdmi_retimer_pi3hdx1204()) {
ioex_set_level(IOEX_HDMI_POWER_EN_DB, 1);
msleep(PI3HDX1204_POWER_ON_DELAY_MS);
- pi3hdx1204_enable(I2C_PORT_TCPC1,
- PI3HDX1204_I2C_ADDR_FLAGS,
+ pi3hdx1204_enable(I2C_PORT_TCPC1, PI3HDX1204_I2C_ADDR_FLAGS,
hpd);
}
}
@@ -319,9 +318,7 @@ static void board_chipset_suspend(void)
ioex_set_level(IOEX_USB_A0_RETIMER_EN, 0);
if (ec_config_has_hdmi_retimer_pi3hdx1204()) {
- pi3hdx1204_enable(I2C_PORT_TCPC1,
- PI3HDX1204_I2C_ADDR_FLAGS,
- 0);
+ pi3hdx1204_enable(I2C_PORT_TCPC1, PI3HDX1204_I2C_ADDR_FLAGS, 0);
ioex_set_level(IOEX_HDMI_POWER_EN_DB, 0);
}
@@ -340,35 +337,31 @@ static int woomax_ps8818_mux_set(const struct usb_mux *me,
/* USB specific config */
if (mux_state & USB_PD_MUX_USB_ENABLED) {
/* Boost the USB gain */
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX1EQ_10G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_18DB);
+ rv = ps8818_i2c_field_update8(me, PS8818_REG_PAGE1,
+ PS8818_REG1_APTX1EQ_10G_LEVEL,
+ PS8818_EQ_LEVEL_UP_MASK,
+ PS8818_EQ_LEVEL_UP_18DB);
if (rv)
return rv;
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX2EQ_10G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_18DB);
+ rv = ps8818_i2c_field_update8(me, PS8818_REG_PAGE1,
+ PS8818_REG1_APTX2EQ_10G_LEVEL,
+ PS8818_EQ_LEVEL_UP_MASK,
+ PS8818_EQ_LEVEL_UP_18DB);
if (rv)
return rv;
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX1EQ_5G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_19DB);
+ rv = ps8818_i2c_field_update8(me, PS8818_REG_PAGE1,
+ PS8818_REG1_APTX1EQ_5G_LEVEL,
+ PS8818_EQ_LEVEL_UP_MASK,
+ PS8818_EQ_LEVEL_UP_19DB);
if (rv)
return rv;
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_APTX2EQ_5G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_19DB);
+ rv = ps8818_i2c_field_update8(me, PS8818_REG_PAGE1,
+ PS8818_REG1_APTX2EQ_5G_LEVEL,
+ PS8818_EQ_LEVEL_UP_MASK,
+ PS8818_EQ_LEVEL_UP_19DB);
if (rv)
return rv;
}
@@ -376,11 +369,10 @@ static int woomax_ps8818_mux_set(const struct usb_mux *me,
/* DP specific config */
if (mux_state & USB_PD_MUX_DP_ENABLED) {
/* Boost the DP gain */
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_DPEQ_LEVEL,
- PS8818_DPEQ_LEVEL_UP_MASK,
- PS8818_DPEQ_LEVEL_UP_19DB);
+ rv = ps8818_i2c_field_update8(me, PS8818_REG_PAGE1,
+ PS8818_REG1_DPEQ_LEVEL,
+ PS8818_DPEQ_LEVEL_UP_MASK,
+ PS8818_DPEQ_LEVEL_UP_19DB);
if (rv)
return rv;
@@ -391,21 +383,18 @@ static int woomax_ps8818_mux_set(const struct usb_mux *me,
}
if (!(mux_state & USB_PD_MUX_POLARITY_INVERTED)) {
- rv = ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_CRX1EQ_10G_LEVEL,
- PS8818_EQ_LEVEL_UP_MASK,
- PS8818_EQ_LEVEL_UP_19DB);
+ rv = ps8818_i2c_field_update8(me, PS8818_REG_PAGE1,
+ PS8818_REG1_CRX1EQ_10G_LEVEL,
+ PS8818_EQ_LEVEL_UP_MASK,
+ PS8818_EQ_LEVEL_UP_19DB);
rv |= ps8818_i2c_write(me, PS8818_REG_PAGE1,
- PS8818_REG1_APRX1_DE_LEVEL, 0x02);
+ PS8818_REG1_APRX1_DE_LEVEL, 0x02);
}
/* set the RX input termination */
- rv |= ps8818_i2c_field_update8(me,
- PS8818_REG_PAGE1,
- PS8818_REG1_RX_PHY,
- PS8818_RX_INPUT_TERM_MASK,
- PS8818_RX_INPUT_TERM_85_OHM);
+ rv |= ps8818_i2c_field_update8(me, PS8818_REG_PAGE1, PS8818_REG1_RX_PHY,
+ PS8818_RX_INPUT_TERM_MASK,
+ PS8818_RX_INPUT_TERM_85_OHM);
/* set register 0x40 ICP1 for 1G PD loop */
rv |= ps8818_i2c_write(me, PS8818_REG_PAGE1, 0x40, 0x84);
@@ -425,11 +414,10 @@ static int woomax_ps8802_mux_set(const struct usb_mux *me,
/* USB specific config */
if (mux_state & USB_PD_MUX_USB_ENABLED) {
/* Boost the USB gain */
- rv = ps8802_i2c_field_update16(me,
- PS8802_REG_PAGE2,
- PS8802_REG2_USB_SSEQ_LEVEL,
- PS8802_USBEQ_LEVEL_UP_MASK,
- PS8802_USBEQ_LEVEL_UP_19DB);
+ rv = ps8802_i2c_field_update16(me, PS8802_REG_PAGE2,
+ PS8802_REG2_USB_SSEQ_LEVEL,
+ PS8802_USBEQ_LEVEL_UP_MASK,
+ PS8802_USBEQ_LEVEL_UP_19DB);
if (rv)
return rv;
}
@@ -437,11 +425,10 @@ static int woomax_ps8802_mux_set(const struct usb_mux *me,
/* DP specific config */
if (mux_state & USB_PD_MUX_DP_ENABLED) {
/*Boost the DP gain */
- rv = ps8802_i2c_field_update16(me,
- PS8802_REG_PAGE2,
- PS8802_REG2_DPEQ_LEVEL,
- PS8802_DPEQ_LEVEL_UP_MASK,
- PS8802_DPEQ_LEVEL_UP_19DB);
+ rv = ps8802_i2c_field_update16(me, PS8802_REG_PAGE2,
+ PS8802_REG2_DPEQ_LEVEL,
+ PS8802_DPEQ_LEVEL_UP_MASK,
+ PS8802_DPEQ_LEVEL_UP_19DB);
if (rv)
return rv;
@@ -453,11 +440,10 @@ static int woomax_ps8802_mux_set(const struct usb_mux *me,
}
/* Set extra swing level tuning at 800mV/P0 */
- rv = ps8802_i2c_field_update8(me,
- PS8802_REG_PAGE1,
- PS8802_800MV_LEVEL_TUNING,
- PS8802_EXTRA_SWING_LEVEL_P0_MASK,
- PS8802_EXTRA_SWING_LEVEL_P0_UP_1);
+ rv = ps8802_i2c_field_update8(me, PS8802_REG_PAGE1,
+ PS8802_800MV_LEVEL_TUNING,
+ PS8802_EXTRA_SWING_LEVEL_P0_MASK,
+ PS8802_EXTRA_SWING_LEVEL_P0_UP_1);
return rv;
}
@@ -470,6 +456,9 @@ const struct usb_mux usbc1_woomax_ps8818 = {
.board_set = &woomax_ps8818_mux_set,
};
+/* Place holder for second mux in USBC1 chain */
+struct usb_mux_chain usbc1_mux1;
+
static void setup_mux(void)
{
if (ec_config_has_usbc1_retimer_ps8802()) {
@@ -481,13 +470,11 @@ static void setup_mux(void)
* Replace usb_muxes[USBC_PORT_C1] with the PS8802
* table entry.
*/
- memcpy(&usb_muxes[USBC_PORT_C1],
- &usbc1_ps8802,
- sizeof(struct usb_mux));
+ usb_muxes[USBC_PORT_C1].mux = &usbc1_ps8802;
/* Set the AMD FP5 as the secondary MUX */
- usb_muxes[USBC_PORT_C1].next_mux = &usbc1_amd_fp5_usb_mux;
- usb_muxes[USBC_PORT_C1].board_set = &woomax_ps8802_mux_set;
+ usbc1_mux1.mux = &usbc1_amd_fp5_usb_mux;
+ usbc1_ps8802.board_set = &woomax_ps8802_mux_set;
/* Don't have the AMD FP5 flip */
usbc1_amd_fp5_usb_mux.flags = USB_MUX_FLAG_SET_WITHOUT_FLIP;
@@ -501,91 +488,213 @@ static void setup_mux(void)
* Replace usb_muxes[USBC_PORT_C1] with the AMD FP5
* table entry.
*/
- memcpy(&usb_muxes[USBC_PORT_C1],
- &usbc1_amd_fp5_usb_mux,
- sizeof(struct usb_mux));
+ usb_muxes[USBC_PORT_C1].mux = &usbc1_amd_fp5_usb_mux;
/* Set the PS8818 as the secondary MUX */
- usb_muxes[USBC_PORT_C1].next_mux = &usbc1_woomax_ps8818;
+ usbc1_mux1.mux = &usbc1_woomax_ps8818;
}
}
-enum pi3dpx1207_usb_conf {
- USB_DP = 0,
- USB_DP_INV,
- USB,
- USB_INV,
- DP,
- DP_INV
-};
+enum pi3dpx1207_usb_conf { USB_DP = 0, USB_DP_INV, USB, USB_INV, DP, DP_INV };
static uint8_t pi3dpx1207_picasso_eq[] = {
/*usb_dp*/
- 0x13, 0x11, 0x20, 0x62, 0x06, 0x5B, 0x5B,
- 0x07, 0x03, 0x40, 0xFC, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x62,
+ 0x06,
+ 0x5B,
+ 0x5B,
+ 0x07,
+ 0x03,
+ 0x40,
+ 0xFC,
+ 0x42,
+ 0x71,
/*usb_dp_inv */
- 0x13, 0x11, 0x20, 0x72, 0x06, 0x03, 0x07,
- 0x5B, 0x5B, 0x23, 0xFC, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x72,
+ 0x06,
+ 0x03,
+ 0x07,
+ 0x5B,
+ 0x5B,
+ 0x23,
+ 0xFC,
+ 0x42,
+ 0x71,
/*usb*/
- 0x13, 0x11, 0x20, 0x42, 0x00, 0x03, 0x07,
- 0x07, 0x03, 0x00, 0x42, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x42,
+ 0x00,
+ 0x03,
+ 0x07,
+ 0x07,
+ 0x03,
+ 0x00,
+ 0x42,
+ 0x42,
+ 0x71,
/*usb_inv*/
- 0x13, 0x11, 0x20, 0x52, 0x00, 0x03, 0x07,
- 0x07, 0x03, 0x02, 0x42, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x52,
+ 0x00,
+ 0x03,
+ 0x07,
+ 0x07,
+ 0x03,
+ 0x02,
+ 0x42,
+ 0x42,
+ 0x71,
/*dp*/
- 0x13, 0x11, 0x20, 0x22, 0x06, 0x5B, 0x5B,
- 0x5B, 0x5B, 0x60, 0xFC, 0xFC, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x22,
+ 0x06,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x60,
+ 0xFC,
+ 0xFC,
+ 0x71,
/*dp_inv*/
- 0x13, 0x11, 0x20, 0x32, 0x06, 0x5B, 0x5B,
- 0x5B, 0x5B, 0x63, 0xFC, 0xFC, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x32,
+ 0x06,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x63,
+ 0xFC,
+ 0xFC,
+ 0x71,
};
static uint8_t pi3dpx1207_dali_eq[] = {
/*usb_dp*/
- 0x13, 0x11, 0x20, 0x62, 0x06, 0x5B, 0x5B,
- 0x07, 0x07, 0x40, 0xFC, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x62,
+ 0x06,
+ 0x5B,
+ 0x5B,
+ 0x07,
+ 0x07,
+ 0x40,
+ 0xFC,
+ 0x42,
+ 0x71,
/*usb_dp_inv*/
- 0x13, 0x11, 0x20, 0x72, 0x06, 0x07, 0x07,
- 0x5B, 0x5B, 0x23, 0xFC, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x72,
+ 0x06,
+ 0x07,
+ 0x07,
+ 0x5B,
+ 0x5B,
+ 0x23,
+ 0xFC,
+ 0x42,
+ 0x71,
/*usb*/
- 0x13, 0x11, 0x20, 0x42, 0x00, 0x07, 0x07,
- 0x07, 0x07, 0x00, 0x42, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x42,
+ 0x00,
+ 0x07,
+ 0x07,
+ 0x07,
+ 0x07,
+ 0x00,
+ 0x42,
+ 0x42,
+ 0x71,
/*usb_inv*/
- 0x13, 0x11, 0x20, 0x52, 0x00, 0x07, 0x07,
- 0x07, 0x07, 0x02, 0x42, 0x42, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x52,
+ 0x00,
+ 0x07,
+ 0x07,
+ 0x07,
+ 0x07,
+ 0x02,
+ 0x42,
+ 0x42,
+ 0x71,
/*dp*/
- 0x13, 0x11, 0x20, 0x22, 0x06, 0x5B, 0x5B,
- 0x5B, 0x5B, 0x60, 0xFC, 0xFC, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x22,
+ 0x06,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x60,
+ 0xFC,
+ 0xFC,
+ 0x71,
/*dp_inv*/
- 0x13, 0x11, 0x20, 0x32, 0x06, 0x5B, 0x5B,
- 0x5B, 0x5B, 0x63, 0xFC, 0xFC, 0x71,
+ 0x13,
+ 0x11,
+ 0x20,
+ 0x32,
+ 0x06,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x5B,
+ 0x63,
+ 0xFC,
+ 0xFC,
+ 0x71,
};
static int board_pi3dpx1207_mux_set(const struct usb_mux *me,
- mux_state_t mux_state)
+ mux_state_t mux_state)
{
- int rv = EC_SUCCESS;
+ int rv = EC_SUCCESS;
enum pi3dpx1207_usb_conf usb_mode = 0;
/* USB */
if (mux_state & USB_PD_MUX_USB_ENABLED) {
/* USB with DP */
if (mux_state & USB_PD_MUX_DP_ENABLED) {
- usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED)
- ? USB_DP_INV
- : USB_DP;
+ usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ?
+ USB_DP_INV :
+ USB_DP;
}
/* USB without DP */
else {
- usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED)
- ? USB_INV
- : USB;
+ usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ?
+ USB_INV :
+ USB;
}
}
/* DP without USB */
else if (mux_state & USB_PD_MUX_DP_ENABLED) {
- usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED)
- ? DP_INV
- : DP;
+ usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ? DP_INV :
+ DP;
}
/* Nothing enabled */
else
@@ -594,10 +703,11 @@ static int board_pi3dpx1207_mux_set(const struct usb_mux *me,
/* Write the retimer config byte */
if (ec_config_has_usbc1_retimer_ps8802())
rv = i2c_xfer(me->i2c_port, me->i2c_addr_flags,
- &pi3dpx1207_dali_eq[usb_mode*13], 13, NULL, 0);
+ &pi3dpx1207_dali_eq[usb_mode * 13], 13, NULL, 0);
else
rv = i2c_xfer(me->i2c_port, me->i2c_addr_flags,
- &pi3dpx1207_picasso_eq[usb_mode*13], 13, NULL, 0);
+ &pi3dpx1207_picasso_eq[usb_mode * 13], 13, NULL,
+ 0);
return rv;
}
@@ -612,24 +722,30 @@ const struct pi3dpx1207_usb_control pi3dpx1207_controls[] = {
};
BUILD_ASSERT(ARRAY_SIZE(pi3dpx1207_controls) == USBC_PORT_COUNT);
-const struct usb_mux usbc0_pi3dpx1207_usb_retimer = {
- .usb_port = USBC_PORT_C0,
- .i2c_port = I2C_PORT_TCPC0,
- .i2c_addr_flags = PI3DPX1207_I2C_ADDR_FLAGS,
- .driver = &pi3dpx1207_usb_retimer,
- .board_set = &board_pi3dpx1207_mux_set,
+const struct usb_mux_chain usbc0_pi3dpx1207_usb_retimer = {
+ .mux =
+ &(const struct usb_mux){
+ .usb_port = USBC_PORT_C0,
+ .i2c_port = I2C_PORT_TCPC0,
+ .i2c_addr_flags = PI3DPX1207_I2C_ADDR_FLAGS,
+ .driver = &pi3dpx1207_usb_retimer,
+ .board_set = &board_pi3dpx1207_mux_set,
+ },
};
-struct usb_mux usb_muxes[] = {
+struct usb_mux_chain usb_muxes[] = {
[USBC_PORT_C0] = {
- .usb_port = USBC_PORT_C0,
- .i2c_port = I2C_PORT_USB_AP_MUX,
- .i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS,
- .driver = &amd_fp5_usb_mux_driver,
- .next_mux = &usbc0_pi3dpx1207_usb_retimer,
+ .mux = &(const struct usb_mux) {
+ .usb_port = USBC_PORT_C0,
+ .i2c_port = I2C_PORT_USB_AP_MUX,
+ .i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS,
+ .driver = &amd_fp5_usb_mux_driver,
+ },
+ .next = &usbc0_pi3dpx1207_usb_retimer,
},
[USBC_PORT_C1] = {
/* Filled in dynamically at startup */
+ .next = &usbc1_mux1,
},
};
BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
@@ -667,7 +783,7 @@ DECLARE_HOOK(HOOK_INIT, setup_fw_config, HOOK_PRIO_INIT_I2C + 2);
/* Physical fans. These are logically separate from pwm_channels. */
const struct fan_conf fan_conf_0 = {
.flags = FAN_USE_RPM_MODE,
- .ch = MFT_CH_0, /* Use MFT id to control fan */
+ .ch = MFT_CH_0, /* Use MFT id to control fan */
.pgood_gpio = -1,
.enable_gpio = -1,
};
@@ -758,8 +874,8 @@ BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
/*
* TODO(b/202062363): Remove when clang is fixed.
*/
-#define THERMAL_THERMISTOR \
- { \
+#define THERMAL_THERMISTOR \
+ { \
.temp_host = { \
[EC_TEMP_THRESH_HIGH] = C_TO_K(95), \
[EC_TEMP_THRESH_HALT] = C_TO_K(100), \
@@ -774,8 +890,8 @@ __maybe_unused static const struct ec_thermal_config thermal_thermistor =
/*
* TODO(b/202062363): Remove when clang is fixed.
*/
-#define THERMAL_CPU \
- { \
+#define THERMAL_CPU \
+ { \
.temp_host = { \
[EC_TEMP_THRESH_HIGH] = C_TO_K(95), \
[EC_TEMP_THRESH_HALT] = C_TO_K(100), \
@@ -813,8 +929,8 @@ static const struct ec_response_keybd_config woomax_kb = {
.capabilities = KEYBD_CAP_SCRNLOCK_KEY | KEYBD_CAP_NUMERIC_KEYPAD,
};
-__override const struct ec_response_keybd_config
-*board_vivaldi_keybd_config(void)
+__override const struct ec_response_keybd_config *
+board_vivaldi_keybd_config(void)
{
return &woomax_kb;
}
@@ -833,10 +949,9 @@ static void hdmi_hpd_handler(void)
{
int hpd = gpio_get_level(GPIO_DP1_HPD_EC_IN);
- pi3hdx1204_enable(I2C_PORT_TCPC1,
- PI3HDX1204_I2C_ADDR_FLAGS,
- chipset_in_or_transitioning_to_state(CHIPSET_STATE_ON)
- && hpd);
+ pi3hdx1204_enable(
+ I2C_PORT_TCPC1, PI3HDX1204_I2C_ADDR_FLAGS,
+ chipset_in_or_transitioning_to_state(CHIPSET_STATE_ON) && hpd);
}
DECLARE_DEFERRED(hdmi_hpd_handler);
@@ -856,9 +971,8 @@ int board_usbc_port_to_hpd_gpio_or_ioex(int port)
* USB-C1 OPT3 DB use GPIO_USB_C1_HPD_IN_DB for board version 2
*/
else if (ec_config_has_mst_hub_rtd2141b())
- return (board_ver >= 2)
- ? GPIO_USB_C1_HPD_IN_DB
- : IOEX_USB_C1_HPD_IN_DB;
+ return (board_ver >= 2) ? GPIO_USB_C1_HPD_IN_DB :
+ IOEX_USB_C1_HPD_IN_DB;
/* USB-C1 OPT1 DB use DP2_HPD. */
return GPIO_DP2_HPD;
View Lorry Controller Status