diff options
Diffstat (limited to 'board/zinger/usb_pd_config.h')
| -rw-r--r-- | board/zinger/usb_pd_config.h | 14 |
1 files changed, 8 insertions, 6 deletions
diff --git a/board/zinger/usb_pd_config.h b/board/zinger/usb_pd_config.h index d0797b3d80..c3d86e2c2b 100644 --- a/board/zinger/usb_pd_config.h +++ b/board/zinger/usb_pd_config.h @@ -1,4 +1,4 @@ -/* Copyright 2014 The Chromium OS Authors. All rights reserved. +/* Copyright 2014 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -10,7 +10,7 @@ /* Timer selection for baseband PD communication */ #define TIM_CLOCK_PD_TX_C0 14 -#define TIM_CLOCK_PD_RX_C0 3 +#define TIM_CLOCK_PD_RX_C0 3 #define TIM_CLOCK_PD_TX(p) TIM_CLOCK_PD_TX_C0 #define TIM_CLOCK_PD_RX(p) TIM_CLOCK_PD_RX_C0 @@ -46,7 +46,7 @@ static inline void spi_enable_clock(int port) #define TIM_TX_CCR_IDX(p) TIM_TX_CCR_C0 #define TIM_RX_CCR_IDX(p) TIM_RX_CCR_C0 /* connect TIM3 CH1 to TIM3_CH2 input */ -#define TIM_CCR_CS 2 +#define TIM_CCR_CS 2 #define EXTI_COMP_MASK(p) BIT(7) #define IRQ_COMP STM32_IRQ_EXTI4_15 /* the RX is inverted, triggers on rising edge */ @@ -72,7 +72,7 @@ static inline void pd_tx_spi_reset(int port) static inline void pd_tx_enable(int port, int polarity) { /* Drive SPI MISO on PA6 by putting it in AF mode */ - STM32_GPIO_MODER(GPIO_A) |= 0x2 << (2*6); + STM32_GPIO_MODER(GPIO_A) |= 0x2 << (2 * 6); /* Drive TX GND on PA4 */ STM32_GPIO_BSRR(GPIO_A) = 1 << (4 + 16 /* Reset */); } @@ -83,7 +83,7 @@ static inline void pd_tx_disable(int port, int polarity) /* Put TX GND (PA4) in Hi-Z state */ STM32_GPIO_BSRR(GPIO_A) = BIT(4) /* Set */; /* Put SPI MISO (PA6) in Hi-Z by putting it in input mode */ - STM32_GPIO_MODER(GPIO_A) &= ~(0x3 << (2*6)); + STM32_GPIO_MODER(GPIO_A) &= ~(0x3 << (2 * 6)); } /* we know the plug polarity, do the right configuration */ @@ -98,7 +98,9 @@ static inline void pd_tx_init(void) /* Already done in hardware_init() */ } -static inline void pd_config_init(int port, uint8_t power_role) {} +static inline void pd_config_init(int port, uint8_t power_role) +{ +} static inline int pd_adc_read(int port, int cc) { |