diff options
Diffstat (limited to 'chip/lm4/config_chip.h')
| -rw-r--r-- | chip/lm4/config_chip.h | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/chip/lm4/config_chip.h b/chip/lm4/config_chip.h new file mode 100644 index 0000000000..849f68087d --- /dev/null +++ b/chip/lm4/config_chip.h @@ -0,0 +1,112 @@ +/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#ifndef __CROS_EC_CONFIG_CHIP_H +#define __CROS_EC_CONFIG_CHIP_H + +/* 16.000 Mhz internal oscillator frequency (PIOSC) */ +#define INTERNAL_CLOCK 16000000 + +/* Number of IRQ vectors on the NVIC */ +#define CONFIG_IRQ_COUNT 132 + +/* Use a bigger console output buffer */ +#define CONFIG_UART_TX_BUF_SIZE 8192 + +/* Interval between HOOK_TICK notifications */ +#define HOOK_TICK_INTERVAL (250 * MSEC) + +/* Maximum number of deferrable functions */ +#define DEFERRABLE_MAX_COUNT 8 + +/* Number of I2C ports */ +#define I2C_PORT_COUNT 6 + +/****************************************************************************/ +/* Memory mapping */ + +#define CONFIG_RAM_BASE 0x20000000 +#define CONFIG_RAM_SIZE 0x00008000 + +/* System stack size */ +#define CONFIG_STACK_SIZE 4096 + +/* non-standard task stack sizes */ +#define IDLE_TASK_STACK_SIZE 384 +#define LARGER_TASK_STACK_SIZE 640 + +/* Default task stack size */ +#define TASK_STACK_SIZE 512 + +#define CONFIG_FLASH_BASE 0x00000000 +#define CONFIG_FLASH_BANK_SIZE 0x00000800 /* protect bank size */ +#define CONFIG_FLASH_ERASE_SIZE 0x00000400 /* erase bank size */ +#define CONFIG_FLASH_WRITE_SIZE 0x00000004 /* minimum write size */ + +/* This is the physical size of the flash on the chip. We'll reserve one bank + * in order to emulate per-bank write-protection UNTIL REBOOT. The hardware + * doesn't support a write-protect pin, and if we make the write-protection + * permanent, it can't be undone easily enough to support RMA. */ +#define CONFIG_FLASH_PHYSICAL_SIZE 0x00040000 + +/****************************************************************************/ +/* Define our flash layout. */ + +/* Size of one firmware image in flash */ +#ifndef CONFIG_FW_IMAGE_SIZE +#define CONFIG_FW_IMAGE_SIZE (CONFIG_FLASH_PHYSICAL_SIZE / 2) +#endif + +/* RO firmware must start at beginning of flash */ +#define CONFIG_FW_RO_OFF 0 + +/* + * The EC uses the one bank of flash to emulate a SPI-like write protect + * register with persistent state. + */ +#define CONFIG_FW_PSTATE_SIZE CONFIG_FLASH_BANK_SIZE + +#ifdef CONFIG_PSTATE_AT_END +/* PSTATE is at end of flash */ +#define CONFIG_FW_RO_SIZE CONFIG_FW_IMAGE_SIZE +#define CONFIG_FW_PSTATE_OFF (CONFIG_FLASH_PHYSICAL_SIZE \ + - CONFIG_FW_PSTATE_SIZE) +/* Don't claim PSTATE is part of flash */ +#define CONFIG_FLASH_SIZE CONFIG_FW_PSTATE_OFF + +#else +/* PSTATE immediately follows RO, in the first half of flash */ +#define CONFIG_FW_RO_SIZE (CONFIG_FW_IMAGE_SIZE \ + - CONFIG_FW_PSTATE_SIZE) +#define CONFIG_FW_PSTATE_OFF CONFIG_FW_RO_SIZE +#define CONFIG_FLASH_SIZE CONFIG_FLASH_PHYSICAL_SIZE +#endif + +/* Either way, RW firmware is one firmware image offset from the start */ +#define CONFIG_FW_RW_OFF CONFIG_FW_IMAGE_SIZE +#define CONFIG_FW_RW_SIZE CONFIG_FW_IMAGE_SIZE + +/* TODO: why 2 sets of configs with the same numbers? */ +#define CONFIG_FW_WP_RO_OFF CONFIG_FW_RO_OFF +#define CONFIG_FW_WP_RO_SIZE CONFIG_FW_RO_SIZE + +/****************************************************************************/ +/* Customize the build */ + +/* Build with assertions and debug messages */ +#define CONFIG_DEBUG + +/* Optional features present on this chip */ +#define CONFIG_ADC +#define CONFIG_FLASH +#define CONFIG_FMAP +#define CONFIG_FPU +#define CONFIG_I2C +#define CONFIG_WATCHDOG + +/* Compile for running from RAM instead of flash */ +/* #define COMPILE_FOR_RAM */ + +#endif /* __CROS_EC_CONFIG_CHIP_H */ |