1 files changed, 0 insertions, 119 deletions
diff --git a/chip/lm4/keyboard_raw.c b/chip/lm4/keyboard_raw.c
deleted file mode 100644
index 81af0efdde..0000000000
--- a/chip/lm4/keyboard_raw.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/* Copyright 2013 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Functions needed by keyboard scanner module for Chrome EC */
-
-#include "common.h"
-#include "keyboard_raw.h"
-#include "keyboard_scan.h"
-#include "registers.h"
-#include "task.h"
-
-void keyboard_raw_init(void)
-{
-	/* Ensure top-level interrupt is disabled */
-	keyboard_raw_enable_interrupt(0);
-
-	/*
-	 * Set column outputs as open-drain; we either pull them low or let
-	 * them float high.
-	 */
-	LM4_GPIO_AFSEL(LM4_GPIO_P) = 0;  /* KSO[7:0] */
-	LM4_GPIO_AFSEL(LM4_GPIO_Q) &= ~0x1f;  /* KSO[12:8] */
-	LM4_GPIO_DEN(LM4_GPIO_P) = 0xff;
-	LM4_GPIO_DEN(LM4_GPIO_Q) |= 0x1f;
-	LM4_GPIO_DIR(LM4_GPIO_P) = 0xff;
-	LM4_GPIO_DIR(LM4_GPIO_Q) |= 0x1f;
-	LM4_GPIO_ODR(LM4_GPIO_P) = 0xff;
-	LM4_GPIO_ODR(LM4_GPIO_Q) |= 0x1f;
-
-#ifdef CONFIG_KEYBOARD_COL2_INVERTED
-	/*
-	 * When column 2 is inverted, the Silego has a pulldown instead of a
-	 * pullup.  So drive it push-pull instead of open-drain.
-	 */
-	LM4_GPIO_ODR(LM4_GPIO_P) &= ~BIT(2);
-#endif
-
-	/* Set row inputs with pull-up */
-	LM4_GPIO_AFSEL(KB_SCAN_ROW_GPIO) &= 0xff;
-	LM4_GPIO_DEN(KB_SCAN_ROW_GPIO) |= 0xff;
-	LM4_GPIO_DIR(KB_SCAN_ROW_GPIO) = 0;
-	LM4_GPIO_PUR(KB_SCAN_ROW_GPIO) = 0xff;
-
-	/* Edge-sensitive on both edges. */
-	LM4_GPIO_IS(KB_SCAN_ROW_GPIO) = 0;
-	LM4_GPIO_IBE(KB_SCAN_ROW_GPIO) = 0xff;
-
-	/*
-	 * Enable interrupts for the inputs.  The top-level interrupt is still
-	 * masked off, so this won't trigger interrupts yet.
-	 */
-	LM4_GPIO_IM(KB_SCAN_ROW_GPIO) = 0xff;
-}
-
-void keyboard_raw_task_start(void)
-{
-	task_enable_irq(KB_SCAN_ROW_IRQ);
-}
-
-test_mockable void keyboard_raw_drive_column(int col)
-{
-	int mask;
-
-	if (col == KEYBOARD_COLUMN_NONE)
-		mask = 0x1fff;			/* Tri-state all outputs */
-	else if (col == KEYBOARD_COLUMN_ALL)
-		mask = 0;			/* Assert all outputs */
-	else
-		mask = 0x1fff ^ BIT(col);	/* Assert a single output */
-
-#ifdef CONFIG_KEYBOARD_COL2_INVERTED
-	/* Invert column 2 output */
-	mask ^= BIT(2);
-#endif
-
-	LM4_GPIO_DATA(LM4_GPIO_P, 0xff) = mask & 0xff;
-	LM4_GPIO_DATA(LM4_GPIO_Q, 0x1f) = (mask >> 8) & 0x1f;
-}
-
-test_mockable int keyboard_raw_read_rows(void)
-{
-	/* Bits are active-low, so invert returned levels */
-	return LM4_GPIO_DATA(KB_SCAN_ROW_GPIO, 0xff) ^ 0xff;
-}
-
-void keyboard_raw_enable_interrupt(int enable)
-{
-	if (enable) {
-		/*
-		 * Clear pending interrupts before enabling them, because the
-		 * raw interrupt status may have been tripped by keyboard
-		 * scanning or, if a key is already pressed, by driving all the
-		 * outputs.
-		 *
-		 * We won't lose keyboard events because the scanning task will
-		 * explicitly check the raw row state before waiting for an
-		 * interrupt.  If a key is pressed, the task won't wait.
-		 */
-		LM4_GPIO_ICR(KB_SCAN_ROW_GPIO) = 0xff;
-		LM4_GPIO_IM(KB_SCAN_ROW_GPIO) = 0xff;
-	} else {
-		LM4_GPIO_IM(KB_SCAN_ROW_GPIO) = 0;
-	}
-}
-
-/**
- * Interrupt handler for the entire GPIO bank of keyboard rows.
- */
-void keyboard_raw_interrupt(void)
-{
-	/* Clear all pending keyboard interrupts */
-	LM4_GPIO_ICR(KB_SCAN_ROW_GPIO) = 0xff;
-
-	/* Wake the scan task */
-	task_wake(TASK_ID_KEYSCAN);
-}
-DECLARE_IRQ(KB_SCAN_ROW_IRQ, keyboard_raw_interrupt, 3);