diff options
Diffstat (limited to 'chip/npcx/header.c')
| -rw-r--r-- | chip/npcx/header.c | 61 |
1 files changed, 31 insertions, 30 deletions
diff --git a/chip/npcx/header.c b/chip/npcx/header.c index 0ba3ee59d6..2db7d9094c 100644 --- a/chip/npcx/header.c +++ b/chip/npcx/header.c @@ -1,5 +1,5 @@ /* - * Copyright 2015 The Chromium OS Authors. All rights reserved. + * Copyright 2015 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -16,59 +16,60 @@ #include "registers.h" /* Signature used by fw header */ -#define SIG_FW_EC 0x2A3B4D5E +#define SIG_FW_EC 0x2A3B4D5E /* Definition used by error detection configuration */ -#define CHECK_CRC 0x00 -#define CHECK_CHECKSUM 0x01 -#define ERROR_DETECTION_EN 0x02 +#define CHECK_CRC 0x00 +#define CHECK_CHECKSUM 0x01 +#define ERROR_DETECTION_EN 0x02 #define ERROR_DETECTION_DIS 0x00 /* Code RAM addresses use by header */ /* Put FW at the begin of CODE RAM */ -#define FW_START_ADDR CONFIG_PROGRAM_MEMORY_BASE +#define FW_START_ADDR CONFIG_PROGRAM_MEMORY_BASE /* TODO: It will be filled automatically by ECST */ /* The entry point of reset handler (filled by ECST tool)*/ -#define FW_ENTRY_ADDR 0x100A8169 +#define FW_ENTRY_ADDR 0x100A8169 /* Error detection addresses use by header (A offset relative to flash image) */ -#define ERRCHK_START_ADDR 0x0 -#define ERRCHK_END_ADDR 0x0 +#define ERRCHK_START_ADDR 0x0 +#define ERRCHK_END_ADDR 0x0 /* Firmware Size -> Booter loads RO region after hard reset (16 bytes aligned)*/ -#define FW_SIZE CONFIG_RO_SIZE +#define FW_SIZE CONFIG_RO_SIZE /* FW Header used by NPCX5M5G Booter */ struct __packed fw_header_t { - uint32_t anchor; /* A constant used to verify FW header */ - uint16_t ext_anchor; /* Enable/disable firmware header CRC check */ - uint8_t spi_max_freq; /* Spi maximum allowable clock frequency */ - uint8_t spi_read_mode; /* Spi read mode used for firmware loading */ - uint8_t cfg_err_detect; /* FW load error detection configuration */ - uint32_t fw_load_addr; /* Firmware load start address */ - uint32_t fw_entry; /* Firmware entry point */ + uint32_t anchor; /* A constant used to verify FW header */ + uint16_t ext_anchor; /* Enable/disable firmware header CRC check */ + uint8_t spi_max_freq; /* Spi maximum allowable clock frequency */ + uint8_t spi_read_mode; /* Spi read mode used for firmware loading */ + uint8_t cfg_err_detect; /* FW load error detection configuration */ + uint32_t fw_load_addr; /* Firmware load start address */ + uint32_t fw_entry; /* Firmware entry point */ uint32_t err_detect_start_addr; /* FW error detect start address */ - uint32_t err_detect_end_addr; /* FW error detect end address */ - uint32_t fw_length; /* Firmware length in bytes */ - uint8_t flash_size; /* Indicate SPI flash size */ - uint8_t reserved[26]; /* Reserved bytes */ - uint32_t sig_header; /* The CRC signature of the firmware header */ - uint32_t sig_fw_image; /* The CRC or Checksum of the firmware image */ + uint32_t err_detect_end_addr; /* FW error detect end address */ + uint32_t fw_length; /* Firmware length in bytes */ + uint8_t flash_size; /* Indicate SPI flash size */ + uint8_t reserved[26]; /* Reserved bytes */ + uint32_t sig_header; /* The CRC signature of the firmware header */ + uint32_t sig_fw_image; /* The CRC or Checksum of the firmware image */ } __aligned(1); -__keep __attribute__ ((section(".header"))) +__keep __attribute__((section(".header"))) const struct fw_header_t fw_header = { /* 00 */ SIG_FW_EC, /* 04 */ 0x54E1, /* Header CRC check Enable/Disable -> AB1Eh/54E1h */ - /* 06 */ 0x04, /* 20/25/33/40/50 MHz -> 00/01/02/03/04h */ - /* 07 */ 0x03, /* Normal/Fast/Rev/D_IO/Q_IO Mode -> 00/01/02/03/04h */ - /* 08 */ 0x00, /* Disable CRC check functionality */ + /* 06 */ 0x04, /* 20/25/33/40/50 MHz -> 00/01/02/03/04h */ + /* 07 */ 0x03, /* Normal/Fast/Rev/D_IO/Q_IO Mode -> 00/01/02/03/04h */ + /* 08 */ 0x00, /* Disable CRC check functionality */ /* 09 */ FW_START_ADDR, - /* 0D */ FW_ENTRY_ADDR,/* Filling by ECST tool with -usearmrst option */ + /* 0D */ FW_ENTRY_ADDR, /* Filling by ECST tool with -usearmrst option + */ /* 11 */ ERRCHK_START_ADDR, /* 15 */ ERRCHK_END_ADDR, - /* 19 */ FW_SIZE,/* Filling by ECST tool */ - /* 1D */ 0x0F, /* Flash Size 1/2/4/8/16 Mbytes -> 01/03/07/0F/1Fh */ + /* 19 */ FW_SIZE, /* Filling by ECST tool */ + /* 1D */ 0x0F, /* Flash Size 1/2/4/8/16 Mbytes -> 01/03/07/0F/1Fh */ /* 1E-3F Other fields are filled by ECST tool or reserved */ }; |