1 files changed, 0 insertions, 120 deletions
diff --git a/chip/stm32/usart-stm32f3.c b/chip/stm32/usart-stm32f3.c
deleted file mode 100644
index 42a0cf310e..0000000000
--- a/chip/stm32/usart-stm32f3.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/* Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-#include "usart-stm32f3.h"
-
-#include "common.h"
-#include "compile_time_macros.h"
-#include "hooks.h"
-#include "registers.h"
-#include "task.h"
-#include "util.h"
-
-/*
- * This configs array stores the currently active usart_config structure for
- * each USART, an entry will be NULL if no USART driver is initialized for the
- * corresponding hardware instance.
- */
-#define STM32_USARTS_MAX 3
-
-static struct usart_config const *configs[STM32_USARTS_MAX];
-
-struct usart_configs usart_get_configs(void)
-{
-	return (struct usart_configs) {configs, ARRAY_SIZE(configs)};
-}
-
-static void usart_variant_enable(struct usart_config const *config)
-{
-	configs[config->hw->index] = config;
-
-	/*
-	 * All three USARTS are clocked from the HSI(8MHz) source.  This is
-	 * done because the clock sources elsewhere are setup so that the result
-	 * of clock_get_freq() is not the input clock frequency to the USARTs
-	 * baud rate divisors.
-	 */
-	STM32_RCC_CFGR3 |= 0x000f0003;
-
-	usart_set_baud_f0_l(config, config->baud, 8000000);
-
-	task_enable_irq(config->hw->irq);
-}
-
-static void usart_variant_disable(struct usart_config const *config)
-{
-	task_disable_irq(config->hw->irq);
-
-	configs[config->hw->index] = NULL;
-}
-
-static struct usart_hw_ops const usart_variant_hw_ops = {
-	.enable  = usart_variant_enable,
-	.disable = usart_variant_disable,
-};
-
-void usart_clear_tc(struct usart_config const *config)
-{
-	STM32_USART_ICR(config->hw->base) |= STM32_USART_ICR_TCCF;
-}
-
-/*
- * USART interrupt bindings.  These functions can not be defined as static or
- * they will be removed by the linker because of the way that DECLARE_IRQ works.
- */
-#if defined(CONFIG_STREAM_USART1)
-struct usart_hw_config const usart1_hw = {
-	.index          = 0,
-	.base           = STM32_USART1_BASE,
-	.irq            = STM32_IRQ_USART1,
-	.clock_register = &STM32_RCC_APB2ENR,
-	.clock_enable   = STM32_RCC_PB2_USART1,
-	.ops            = &usart_variant_hw_ops,
-};
-
-void usart1_interrupt(void)
-{
-	usart_interrupt(configs[0]);
-}
-
-DECLARE_IRQ(STM32_IRQ_USART1, usart1_interrupt, 2);
-#endif
-
-#if defined(CONFIG_STREAM_USART2)
-struct usart_hw_config const usart2_hw = {
-	.index          = 1,
-	.base           = STM32_USART2_BASE,
-	.irq            = STM32_IRQ_USART2,
-	.clock_register = &STM32_RCC_APB1ENR,
-	.clock_enable   = STM32_RCC_PB1_USART2,
-	.ops            = &usart_variant_hw_ops,
-};
-
-void usart2_interrupt(void)
-{
-	usart_interrupt(configs[1]);
-}
-
-DECLARE_IRQ(STM32_IRQ_USART2, usart2_interrupt, 2);
-#endif
-
-#if defined(CONFIG_STREAM_USART3)
-struct usart_hw_config const usart3_hw = {
-	.index          = 2,
-	.base           = STM32_USART3_BASE,
-	.irq            = STM32_IRQ_USART3,
-	.clock_register = &STM32_RCC_APB1ENR,
-	.clock_enable   = STM32_RCC_PB1_USART3,
-	.ops            = &usart_variant_hw_ops,
-};
-#endif
-
-#if defined(CONFIG_STREAM_USART3)
-void usart3_interrupt(void)
-{
-	usart_interrupt(configs[2]);
-}
-
-DECLARE_IRQ(STM32_IRQ_USART3, usart3_interrupt, 2);
-#endif