1 files changed, 0 insertions, 224 deletions
diff --git a/common/usb_pd_console_cmd.c b/common/usb_pd_console_cmd.c
deleted file mode 100644
index 3ad1944494..0000000000
--- a/common/usb_pd_console_cmd.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Console commands for USB-PD module.
- */
-
-#include "console.h"
-#include "usb_pd.h"
-#include "util.h"
-#include "usb_pd_tcpm.h"
-
-#ifdef CONFIG_USB_PD_ALT_MODE_DFP
-#ifdef CONFIG_CMD_USB_PD_PE
-static void dump_pe(int port)
-{
-	int i, j, idh_ptype;
-	struct svdm_amode_data *modep;
-	uint32_t mode_caps;
-	const union disc_ident_ack *resp;
-	enum tcpci_msg_type type;
-	/* TODO(b/152417597): Output SOP' discovery results */
-	const struct pd_discovery *disc =
-		pd_get_am_discovery(port, TCPCI_MSG_SOP);
-
-	static const char * const idh_ptype_names[]  = {
-		"UNDEF", "Hub", "Periph", "PCable", "ACable", "AMA",
-		"RSV6", "RSV7"};
-	static const char * const tx_names[] = {"SOP", "SOP'", "SOP''"};
-
-	for (type = TCPCI_MSG_SOP; type < DISCOVERY_TYPE_COUNT; type++) {
-		resp = pd_get_identity_response(port, type);
-		if (pd_get_identity_discovery(port, type) != PD_DISC_COMPLETE) {
-			ccprintf("No %s identity discovered yet.\n",
-								tx_names[type]);
-			continue;
-		}
-
-		idh_ptype = resp->idh.product_type;
-		ccprintf("IDENT %s:\n", tx_names[type]);
-		ccprintf("\t[ID Header] %08x :: %s, VID:%04x\n",
-			 resp->raw_value[0],
-			 idh_ptype_names[idh_ptype],
-			 resp->idh.usb_vendor_id);
-
-		ccprintf("\t[Cert Stat] %08x\n", resp->cert.xid);
-		for (i = 2; i < ARRAY_SIZE(resp->raw_value); i++) {
-			ccprintf("\t");
-			if (resp->raw_value[i])
-				ccprintf("[%d] %08x ", i, resp->raw_value[i]);
-		}
-		ccprintf("\n");
-	}
-
-	if (pd_get_svid_count(port, TCPCI_MSG_SOP) < 1) {
-		ccprintf("No SVIDS discovered yet.\n");
-		return;
-	}
-
-	/* TODO(b/152418267): Display discovered SVIDs and modes for SOP' */
-	for (i = 0; i < pd_get_svid_count(port, TCPCI_MSG_SOP); i++) {
-		ccprintf("SVID[%d]: %04x MODES:", i, disc->svids[i].svid);
-		for (j = 0; j < disc->svids[j].mode_cnt; j++)
-			ccprintf(" [%d] %08x", j + 1,
-					disc->svids[i].mode_vdo[j]);
-		ccprintf("\n");
-
-		modep = pd_get_amode_data(port, TCPCI_MSG_SOP,
-				disc->svids[i].svid);
-		if (modep) {
-			mode_caps = modep->data->mode_vdo[modep->opos - 1];
-			ccprintf("MODE[%d]: svid:%04x caps:%08x\n", modep->opos,
-				 modep->fx->svid, mode_caps);
-		}
-	}
-}
-
-static int command_pe(int argc, char **argv)
-{
-	int port;
-	char *e;
-
-	if (argc < 3)
-		return EC_ERROR_PARAM_COUNT;
-
-	/* command: pe <port> <subcmd> <args> */
-	port = strtoi(argv[1], &e, 10);
-	if (*e || port >= board_get_usb_pd_port_count())
-		return EC_ERROR_PARAM2;
-	if (!strncasecmp(argv[2], "dump", 4))
-		dump_pe(port);
-
-	return EC_SUCCESS;
-}
-DECLARE_CONSOLE_COMMAND(pe, command_pe,
-			"<port> dump",
-			"USB PE");
-#endif /* CONFIG_CMD_USB_PD_PE */
-
-#ifdef CONFIG_CMD_USB_PD_CABLE
-static const char * const cable_type[] = {
-	[IDH_PTYPE_PCABLE] = "Passive",
-	[IDH_PTYPE_ACABLE] = "Active",
-};
-
-static const char * const cable_curr[] = {
-	[USB_VBUS_CUR_3A] = "3A",
-	[USB_VBUS_CUR_5A] = "5A",
-};
-
-static int command_cable(int argc, char **argv)
-{
-	int port;
-	char *e;
-	const struct pd_discovery *disc;
-	enum idh_ptype ptype;
-	int cable_rev;
-	union tbt_mode_resp_cable cable_mode_resp;
-
-	if (argc < 2)
-		return EC_ERROR_PARAM_COUNT;
-
-	port = strtoi(argv[1], &e, 0);
-	if (*e || port >= board_get_usb_pd_port_count())
-		return EC_ERROR_PARAM2;
-
-	ptype = get_usb_pd_cable_type(port);
-
-	ccprintf("Cable Type: ");
-	if (ptype != IDH_PTYPE_PCABLE &&
-		ptype != IDH_PTYPE_ACABLE) {
-		ccprintf("Not Emark Cable\n");
-		return EC_SUCCESS;
-	}
-	ccprintf("%s\n", cable_type[ptype]);
-
-	cable_rev = pd_get_rev(port, TCPCI_MSG_SOP_PRIME);
-	disc = pd_get_am_discovery(port, TCPCI_MSG_SOP_PRIME);
-	cable_mode_resp.raw_value =
-		pd_get_tbt_mode_vdo(port, TCPCI_MSG_SOP_PRIME);
-
-
-	/* Cable revision */
-	ccprintf("Cable Rev: %d.0\n", cable_rev + 1);
-
-	/*
-	 * For rev 2.0, rev 3.0 active and passive cables have same bits for
-	 * connector type (Bit 19:18) and current handling capability bit 6:5
-	 */
-	ccprintf("Connector Type: %d\n",
-				disc->identity.product_t1.p_rev20.connector);
-
-	if (disc->identity.product_t1.p_rev20.vbus_cur) {
-		ccprintf("Cable Current: %s\n",
-		   disc->identity.product_t1.p_rev20.vbus_cur >
-		      ARRAY_SIZE(cable_curr) ? "Invalid" :
-		      cable_curr[disc->identity.product_t1.p_rev20.vbus_cur]);
-	} else
-		ccprintf("Cable Current: Invalid\n");
-
-	/*
-	 * For Rev 3.0 passive cables and Rev 2.0 active and passive cables,
-	 * USB Superspeed Signaling support have same bits 2:0
-	 */
-	if (ptype == IDH_PTYPE_PCABLE)
-		ccprintf("USB Superspeed Signaling support: %d\n",
-			disc->identity.product_t1.p_rev20.ss);
-
-	/*
-	 * For Rev 3.0 active cables and Rev 2.0 active and passive cables,
-	 * SOP" controller preset have same bit 3
-	 */
-	if (ptype == IDH_PTYPE_ACABLE)
-		ccprintf("SOP'' Controller: %s present\n",
-		      disc->identity.product_t1.a_rev20.sop_p_p ? "" : "Not");
-
-	if (cable_rev == PD_REV30) {
-		/*
-		 * For Rev 3.0 active and passive cables, Max Vbus vtg have
-		 * same bits 10:9.
-		 */
-		ccprintf("Max vbus voltage: %d\n",
-			20 + 10 * disc->identity.product_t1.p_rev30.vbus_max);
-
-		/* For Rev 3.0 Active cables */
-		if (ptype == IDH_PTYPE_ACABLE) {
-			ccprintf("SS signaling: USB_SS_GEN%u\n",
-				disc->identity.product_t2.a2_rev30.usb_gen ?
-									2 : 1);
-			ccprintf("Number of SS lanes supported: %u\n",
-				disc->identity.product_t2.a2_rev30.usb_lanes);
-		}
-	}
-
-	if (!cable_mode_resp.raw_value)
-		return EC_SUCCESS;
-
-	ccprintf("Rounded support: %s\n",
-		cable_mode_resp.tbt_rounded ==
-			TBT_GEN3_GEN4_ROUNDED_NON_ROUNDED ? "Yes" : "No");
-
-	ccprintf("Optical cable: %s\n",
-		cable_mode_resp.tbt_cable == TBT_CABLE_OPTICAL ? "Yes" : "No");
-
-	ccprintf("Retimer support: %s\n",
-		cable_mode_resp.retimer_type == USB_RETIMER ?
-			"Yes" : "No");
-
-	ccprintf("Link training: %s-directional\n",
-		cable_mode_resp.lsrx_comm == BIDIR_LSRX_COMM ? "Bi" : "Uni");
-
-	ccprintf("Thunderbolt cable type: %s\n",
-		cable_mode_resp.tbt_active_passive == TBT_CABLE_ACTIVE ?
-		"Active" : "Passive");
-
-	return EC_SUCCESS;
-}
-
-DECLARE_CONSOLE_COMMAND(pdcable, command_cable,
-			"<port>",
-			"Cable Characteristics");
-#endif /* CONFIG_CMD_USB_PD_CABLE */
-
-#endif /* CONFIG_USB_PD_ALT_MODE_DFP */