diff options
Diffstat (limited to 'docs/case_closed_debugging_gsc.md')
| -rw-r--r-- | docs/case_closed_debugging_gsc.md | 13 |
1 files changed, 3 insertions, 10 deletions
diff --git a/docs/case_closed_debugging_gsc.md b/docs/case_closed_debugging_gsc.md index 234b92289e..96b505cae6 100644 --- a/docs/case_closed_debugging_gsc.md +++ b/docs/case_closed_debugging_gsc.md @@ -393,7 +393,7 @@ If you want to reflash the AP RO firmware using CCD and your board has issues disabling hardware write protect, you may need to also disable software write protect. -To determine if the board you are using has this issue: +If you suspect the board you are using has this issue, you can try this: 1. Disable write protect using the GSC console command: @@ -401,17 +401,10 @@ To determine if the board you are using has this issue: (gsc) > wp disable ``` -1. Check if hardware write protect disabled when the AP is off: +2. Disable software write protect via CCD: ```bash - (chroot) $ sudo flashrom -p raiden_debug_spi:target=AP --wp-status - ``` - -1. If the last command shows that hardware write protect is still enabled when - the AP is off, then you need to disable software write protect: - - ```bash - (chroot) $ flashrom -p host --wp-disable + (chroot) $ sudo futility flash --wp-disable --servo ``` ## Control Hardware Write Protect {#hw-wp} |