diff options
Diffstat (limited to 'driver/charger/bd9995x.c')
| -rw-r--r-- | driver/charger/bd9995x.c | 1775 |
1 files changed, 0 insertions, 1775 deletions
diff --git a/driver/charger/bd9995x.c b/driver/charger/bd9995x.c deleted file mode 100644 index 6fd79b8d8f..0000000000 --- a/driver/charger/bd9995x.c +++ /dev/null @@ -1,1775 +0,0 @@ -/* Copyright 2016 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * ROHM BD9995X battery charger driver. - */ - -#include "battery.h" -#include "battery_smart.h" -#include "bd9995x.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "charger.h" -#include "console.h" -#include "ec_commands.h" -#include "hooks.h" -#include "i2c.h" -#include "task.h" -#include "time.h" -#include "util.h" -#include "usb_charge.h" -#include "usb_pd.h" - -#define OTPROM_LOAD_WAIT_RETRY 3 - -#define BD9995X_CHARGE_PORT_COUNT 2 - -/* - * BC1.2 detection starts 100ms after VBUS/VCC attach and typically - * completes 312ms after VBUS/VCC attach. - */ -#define BC12_DETECT_US (312*MSEC) -#define BD9995X_VSYS_PRECHARGE_OFFSET_MV 200 - -/* Console output macros */ -#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args) - -#ifdef CONFIG_BD9995X_DELAY_INPUT_PORT_SELECT -/* - * Used in a check to determine if VBUS is within the - * range of some VOLTAGE +/- VBUS_DELTA, where voltage - * is measured in mV. - */ -#define VBUS_DELTA 1000 - -/* VBUS is debounced if it's stable for this length of time */ -#define VBUS_MSEC (100*MSEC) - -/* VBUS debouncing sample interval */ -#define VBUS_CHECK_MSEC (10*MSEC) - -/* Time to wait before VBUS debouncing begins */ -#define STABLE_TIMEOUT (500*MSEC) - -/* Maximum time to wait until VBUS is debounced */ -#define DEBOUNCE_TIMEOUT (500*MSEC) - -enum vstate {START, STABLE, DEBOUNCE}; -static enum vstate vbus_state; - -static int vbus_voltage; -static uint64_t debounce_time; -static uint64_t vbus_timeout; -static int port_update; -static int select_update; -static int select_input_port_update; -#endif - -/* Charger parameters */ -#define CHARGER_NAME BD9995X_CHARGER_NAME -#define CHARGE_V_MAX 19200 -#define CHARGE_V_MIN 3072 -#define CHARGE_V_STEP 16 -#define CHARGE_I_MAX 16320 -#define CHARGE_I_MIN 128 -#define CHARGE_I_OFF 0 -#define CHARGE_I_STEP 64 -#define INPUT_I_MAX 16352 -#define INPUT_I_MIN 512 -#define INPUT_I_STEP 32 - -/* Charger parameters */ -static const struct charger_info bd9995x_charger_info = { - .name = CHARGER_NAME, - .voltage_max = CHARGE_V_MAX, - .voltage_min = CHARGE_V_MIN, - .voltage_step = CHARGE_V_STEP, - .current_max = CHARGE_I_MAX, - .current_min = CHARGE_I_MIN, - .current_step = CHARGE_I_STEP, - .input_current_max = INPUT_I_MAX, - .input_current_min = INPUT_I_MIN, - .input_current_step = INPUT_I_STEP, -}; - -/* Charge command code map */ -static enum bd9995x_command charger_map_cmd = BD9995X_INVALID_COMMAND; - -/* Mutex for active register set control. */ -static struct mutex bd9995x_map_mutex; - -/* Tracks the state of VSYS_PRIORITY */ -static int vsys_priority; -/* Mutex for VIN_CTRL_SET register */ -static struct mutex bd9995x_vin_mutex; - -#ifdef HAS_TASK_USB_CHG -/* USB switch */ -static enum usb_switch usb_switch_state[BD9995X_CHARGE_PORT_COUNT] = { - USB_SWITCH_DISCONNECT, - USB_SWITCH_DISCONNECT, -}; - -static enum ec_error_list bd9995x_set_current(int chgnum, int current); -static enum ec_error_list bd9995x_set_voltage(int chgnum, int voltage); - -/* - * The USB Type-C specification limits the maximum amount of current from BC 1.2 - * suppliers to 1.5A. Technically, proprietary methods are not allowed, but we - * will continue to allow those. - */ -static int bd9995x_get_bc12_ilim(int charge_supplier) -{ - switch (charge_supplier) { - case CHARGE_SUPPLIER_BC12_CDP: - return USB_CHARGER_MAX_CURR_MA; - case CHARGE_SUPPLIER_BC12_DCP: - return USB_CHARGER_MAX_CURR_MA; - case CHARGE_SUPPLIER_BC12_SDP: - return 900; - case CHARGE_SUPPLIER_OTHER: -#ifdef CONFIG_CHARGE_RAMP_SW - return USB_CHARGER_MAX_CURR_MA; -#else - /* - * Setting the higher limit of current may result in an - * anti-collapse hence limiting the current to 1A. - */ - return 1000; -#endif - default: - return 500; - } -} -#endif /* HAS_TASK_USB_CHG */ - -static inline enum ec_error_list ch_raw_read16(int chgnum, int cmd, int *param, - enum bd9995x_command map_cmd) -{ - int rv; - - /* Map the Charge command code to appropriate region */ - mutex_lock(&bd9995x_map_mutex); - if (charger_map_cmd != map_cmd) { - rv = i2c_write16(chg_chips[chgnum].i2c_port, - chg_chips[chgnum].i2c_addr_flags, - BD9995X_CMD_MAP_SET, map_cmd); - if (rv) { - charger_map_cmd = BD9995X_INVALID_COMMAND; - goto bd9995x_read_cleanup; - } - - charger_map_cmd = map_cmd; - } - - rv = i2c_read16(chg_chips[chgnum].i2c_port, - chg_chips[chgnum].i2c_addr_flags, - cmd, param); - -bd9995x_read_cleanup: - mutex_unlock(&bd9995x_map_mutex); - - return rv; -} - -static inline enum ec_error_list ch_raw_write16(int chgnum, int cmd, int param, - enum bd9995x_command map_cmd) -{ - int rv; - - /* Map the Charge command code to appropriate region */ - mutex_lock(&bd9995x_map_mutex); - if (charger_map_cmd != map_cmd) { - rv = i2c_write16(chg_chips[chgnum].i2c_port, - chg_chips[chgnum].i2c_addr_flags, - BD9995X_CMD_MAP_SET, map_cmd); - if (rv) { - charger_map_cmd = BD9995X_INVALID_COMMAND; - goto bd9995x_write_cleanup; - } - - charger_map_cmd = map_cmd; - } - - rv = i2c_write16(chg_chips[chgnum].i2c_port, - chg_chips[chgnum].i2c_addr_flags, - cmd, param); - -bd9995x_write_cleanup: - mutex_unlock(&bd9995x_map_mutex); - - return rv; -} - -/* BD9995X local interfaces */ - -static int bd9995x_set_vfastchg(int chgnum, int voltage) -{ - - int rv; - - /* Fast Charge Voltage Regulation Settings for fast charging. */ - rv = ch_raw_write16(chgnum, BD9995X_CMD_VFASTCHG_REG_SET1, - voltage & 0x7FF0, BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - -#ifndef CONFIG_CHARGER_BATTERY_TSENSE - /* - * If TSENSE is not connected set all the VFASTCHG_REG_SETx - * to same voltage. - */ - rv = ch_raw_write16(chgnum, BD9995X_CMD_VFASTCHG_REG_SET2, - voltage & 0x7FF0, BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - rv = ch_raw_write16(chgnum, BD9995X_CMD_VFASTCHG_REG_SET3, - voltage & 0x7FF0, BD9995X_EXTENDED_COMMAND); -#endif - - return rv; -} - -static int bd9995x_set_vsysreg(int chgnum, int voltage) -{ - /* VSYS Regulation voltage is in 64mV steps. */ - voltage &= ~0x3F; - - return ch_raw_write16(chgnum, BD9995X_CMD_VSYSREG_SET, voltage, - BD9995X_EXTENDED_COMMAND); -} - -static int bd9995x_is_discharging_on_ac(int chgnum) -{ - int reg; - - if (ch_raw_read16(chgnum, BD9995X_CMD_CHGOP_SET2, ®, - BD9995X_EXTENDED_COMMAND)) - return 0; - - return !!(reg & BD9995X_CMD_CHGOP_SET2_BATT_LEARN); -} - -static int bd9995x_charger_enable(int chgnum, int enable) -{ - int rv, reg; - static int prev_chg_enable = -1; - const struct battery_info *bi = battery_get_info(); - -#ifdef CONFIG_CHARGER_BD9995X_CHGEN - /* - * If the battery is not yet initialized, dont turn-off the BGATE so - * that voltage from the AC is applied to the battery PACK. - */ - if (!enable && !board_battery_initialized()) - return EC_SUCCESS; -#endif - - /* Nothing to change */ - if (enable == prev_chg_enable) - return EC_SUCCESS; - - prev_chg_enable = enable; - - if (enable) { - /* - * BGATE capacitor max : 0.1uF + 20% - * Charge MOSFET threshold max : 2.8V - * BGATE charge pump current min : 3uA - * T = C * V / I so, Tmax = 112ms - */ - msleep(115); - - /* - * Set VSYSREG_SET <= VBAT so that the charger is in Fast-Charge - * state when charging. - */ - rv = bd9995x_set_vsysreg(chgnum, bi->voltage_min); - } else { - /* - * Set VSYSREG_SET > VBAT so that the charger is in Pre-Charge - * state when not charging or discharging. - */ - rv = bd9995x_set_vsysreg(chgnum, bi->voltage_max + - BD9995X_VSYS_PRECHARGE_OFFSET_MV); - - /* - * Allow charger in pre-charge state for 50ms before disabling - * the charger which prevents inrush current while moving from - * fast-charge state to pre-charge state. - */ - msleep(50); - } - if (rv) - return rv; - - rv = ch_raw_read16(chgnum, BD9995X_CMD_CHGOP_SET2, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - if (enable) - reg |= BD9995X_CMD_CHGOP_SET2_CHG_EN; - else - reg &= ~BD9995X_CMD_CHGOP_SET2_CHG_EN; - - return ch_raw_write16(chgnum, BD9995X_CMD_CHGOP_SET2, reg, - BD9995X_EXTENDED_COMMAND); -} - -static int bd9995x_por_reset(int chgnum) -{ - int rv; - int reg; - int i; - - rv = ch_raw_write16(chgnum, BD9995X_CMD_SYSTEM_CTRL_SET, - BD9995X_CMD_SYSTEM_CTRL_SET_OTPLD | - BD9995X_CMD_SYSTEM_CTRL_SET_ALLRST, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - /* Wait until OTPROM loading is finished */ - for (i = 0; i < OTPROM_LOAD_WAIT_RETRY; i++) { - msleep(10); - rv = ch_raw_read16(chgnum, BD9995X_CMD_SYSTEM_STATUS, ®, - BD9995X_EXTENDED_COMMAND); - - if (!rv && (reg & BD9995X_CMD_SYSTEM_STATUS_OTPLD_STATE) && - (reg & BD9995X_CMD_SYSTEM_STATUS_ALLRST_STATE)) - break; - } - - if (rv) - return rv; - if (i == OTPROM_LOAD_WAIT_RETRY) - return EC_ERROR_TIMEOUT; - - return ch_raw_write16(chgnum, BD9995X_CMD_SYSTEM_CTRL_SET, 0, - BD9995X_EXTENDED_COMMAND); -} - -static int bd9995x_reset_to_zero(int chgnum) -{ - int rv; - - rv = bd9995x_set_current(chgnum, 0); - if (rv) - return rv; - - return bd9995x_set_voltage(chgnum, 0); -} - -static int bd9995x_get_charger_op_status(int chgnum, int *status) -{ - return ch_raw_read16(chgnum, BD9995X_CMD_CHGOP_STATUS, status, - BD9995X_EXTENDED_COMMAND); -} - -#ifdef HAS_TASK_USB_CHG -static int bc12_detected_type[CONFIG_USB_PD_PORT_MAX_COUNT]; -/* Mutex for UCD_SET registers, lock before read / mask / write. */ -static struct mutex ucd_set_mutex[BD9995X_CHARGE_PORT_COUNT]; - -static int bd9995x_get_bc12_device_type(int chgnum, int port) -{ - int rv; - int reg; - - rv = ch_raw_read16(chgnum, (port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_VBUS_UCD_STATUS : - BD9995X_CMD_VCC_UCD_STATUS, - ®, BD9995X_EXTENDED_COMMAND); - if (rv) - return CHARGE_SUPPLIER_NONE; - - switch (reg & BD9995X_TYPE_MASK) { - case BD9995X_TYPE_CDP: - return CHARGE_SUPPLIER_BC12_CDP; - case BD9995X_TYPE_DCP: - return CHARGE_SUPPLIER_BC12_DCP; - case BD9995X_TYPE_SDP: - return CHARGE_SUPPLIER_BC12_SDP; - case BD9995X_TYPE_PUP_PORT: - case BD9995X_TYPE_OTHER: - return CHARGE_SUPPLIER_OTHER; - case BD9995X_TYPE_OPEN_PORT: - case BD9995X_TYPE_VBUS_OPEN: - default: - return CHARGE_SUPPLIER_NONE; - } -} - -/* - * Do safe read / mask / write of BD9995X_CMD_*_UCD_SET register. - * The USB charger task owns all bits of this register, except for bit 0 - * (BD9995X_CMD_UCD_SET_USB_SW), which is controlled by - * usb_charger_set_switches(). - */ -static int bd9995x_update_ucd_set_reg(int chgnum, int port, uint16_t mask, - int set) -{ - int rv; - int reg; - int port_reg = (port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_VBUS_UCD_SET : BD9995X_CMD_VCC_UCD_SET; - - mutex_lock(&ucd_set_mutex[port]); - rv = ch_raw_read16(chgnum, port_reg, ®, BD9995X_EXTENDED_COMMAND); - if (!rv) { - if (set) - reg |= mask; - else - reg &= ~mask; - - rv = ch_raw_write16(chgnum, port_reg, reg, - BD9995X_EXTENDED_COMMAND); - } - - mutex_unlock(&ucd_set_mutex[port]); - return rv; -} - -static int bd9995x_bc12_check_type(int chgnum, int port) -{ - int bc12_type; - struct charge_port_info charge; - int vbus_provided = bd9995x_is_vbus_provided(port) && - !usb_charger_port_is_sourcing_vbus(port); - - /* - * If vbus is no longer provided, then no need to continue. Return 0 so - * that a wait event is not scheduled. - */ - if (!vbus_provided) - return 0; - - /* get device type */ - bc12_type = bd9995x_get_bc12_device_type(chgnum, port); - if (bc12_type == CHARGE_SUPPLIER_NONE) - /* - * Device type is not available, return non-zero so new wait - * will be scheduled before putting the task to sleep. - */ - return 1; - - bc12_detected_type[port] = bc12_type; - /* Update charge manager */ - charge.voltage = USB_CHARGER_VOLTAGE_MV; - charge.current = bd9995x_get_bc12_ilim(bc12_type); - charge_manager_update_charge(bc12_type, port, &charge); - - return 0; -} - -static void bd9995x_bc12_detach(int chgnum, int port, int type) -{ - /* Update charge manager */ - charge_manager_update_charge(type, port, NULL); - - /* Disable charging trigger by BC1.2 detection */ - bd9995x_bc12_enable_charging(port, 0); -} - -static int bd9995x_enable_vbus_detect_interrupts(int chgnum, int port, - int enable) -{ - int reg; - int rv; - int port_reg; - int mask_val; - - /* 1st Level Interrupt Setting */ - rv = ch_raw_read16(chgnum, BD9995X_CMD_INT0_SET, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - mask_val = ((port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_INT0_SET_INT1_EN : - BD9995X_CMD_INT0_SET_INT2_EN) | - BD9995X_CMD_INT0_SET_INT0_EN; - if (enable) - reg |= mask_val; - else - reg &= ~mask_val; - - rv = ch_raw_write16(chgnum, BD9995X_CMD_INT0_SET, reg, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - /* 2nd Level Interrupt Setting */ - port_reg = (port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_INT1_SET : BD9995X_CMD_INT2_SET; - rv = ch_raw_read16(chgnum, port_reg, ®, BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - /* Enable threshold interrupts if we need to control discharge */ -#ifdef CONFIG_USB_PD_DISCHARGE - mask_val = BD9995X_CMD_INT_VBUS_DET | BD9995X_CMD_INT_VBUS_TH; -#else - mask_val = BD9995X_CMD_INT_VBUS_DET; -#endif - if (enable) - reg |= mask_val; - else - reg &= ~mask_val; - - return ch_raw_write16(chgnum, port_reg, reg, BD9995X_EXTENDED_COMMAND); -} - -/* Read + clear active interrupt bits for a given port */ -static int bd9995x_get_interrupts(int chgnum, int port) -{ - int rv; - int reg; - int port_reg; - - port_reg = (port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_INT1_STATUS : BD9995X_CMD_INT2_STATUS; - - rv = ch_raw_read16(chgnum, port_reg, ®, BD9995X_EXTENDED_COMMAND); - - if (rv) - return 0; - - /* Clear the interrupt status bits we just read */ - ch_raw_write16(chgnum, port_reg, reg, BD9995X_EXTENDED_COMMAND); - - return reg; -} - -/* - * Set or clear registers necessary to do one-time BC1.2 detection. - * Pass enable = 1 to trigger BC1.2 detection, and enable = 0 once - * BC1.2 detection has completed. - */ -static int bd9995x_bc12_detect(int chgnum, int port, int enable) -{ - return bd9995x_update_ucd_set_reg(chgnum, port, - BD9995X_CMD_UCD_SET_BCSRETRY | - BD9995X_CMD_UCD_SET_USBDETEN | - BD9995X_CMD_UCD_SET_USB_SW_EN, - enable); -} - -static int usb_charger_process(int chgnum, int port) -{ - int vbus_provided = bd9995x_is_vbus_provided(port) && - !usb_charger_port_is_sourcing_vbus(port); - - /* Inform other modules about VBUS level */ - usb_charger_vbus_change(port, vbus_provided); - - /* - * Do BC1.2 detection, if we have VBUS and our port is not known - * to speak PD. - */ - if (vbus_provided && !pd_capable(port)) { - bd9995x_bc12_detect(chgnum, port, 1); - /* - * Need to give the charger time (~312 mSec) before the - * bc12_type is available. The main task loop will schedule a - * task wait event which will then call bd9995x_bc12_get_type. - */ - return 1; - } - - /* Reset BC1.2 regs so we don't do auto-detection. */ - bd9995x_bc12_detect(chgnum, port, 0); - - /* - * VBUS is no longer being provided, if the bc12_type had been - * previously determined, then need to detach. - */ - if (bc12_detected_type[port] != CHARGE_SUPPLIER_NONE) { - /* Charger/sink detached */ - bd9995x_bc12_detach(chgnum, port, bc12_detected_type[port]); - bc12_detected_type[port] = CHARGE_SUPPLIER_NONE; - } - /* No need for the task to schedule a wait event */ - return 0; -} - -#ifdef CONFIG_CHARGE_RAMP_SW -static int bd9995x_ramp_allowed(int supplier) -{ - return supplier == CHARGE_SUPPLIER_BC12_DCP || - supplier == CHARGE_SUPPLIER_BC12_SDP || - supplier == CHARGE_SUPPLIER_BC12_CDP || - supplier == CHARGE_SUPPLIER_OTHER; -} - -static int bd9995x_ramp_max(int supplier, int sup_curr) -{ - return bd9995x_get_bc12_ilim(supplier); -} -#endif /* CONFIG_CHARGE_RAMP_SW */ -#endif /* HAS_TASK_USB_CHG */ - -/* chip specific interfaces */ - -static enum ec_error_list bd9995x_set_input_current_limit(int chgnum, - int input_current) -{ - int rv; - - /* Input current step 32 mA */ - input_current &= ~0x1F; - - if (input_current < bd9995x_charger_info.input_current_min) - input_current = bd9995x_charger_info.input_current_min; - - rv = ch_raw_write16(chgnum, BD9995X_CMD_IBUS_LIM_SET, input_current, - BD9995X_BAT_CHG_COMMAND); - if (rv) - return rv; - - return ch_raw_write16(chgnum, BD9995X_CMD_ICC_LIM_SET, input_current, - BD9995X_BAT_CHG_COMMAND); -} - -static enum ec_error_list bd9995x_get_input_current_limit(int chgnum, - int *input_current) -{ - return ch_raw_read16(chgnum, BD9995X_CMD_CUR_ILIM_VAL, input_current, - BD9995X_EXTENDED_COMMAND); -} - -static enum ec_error_list bd9995x_manufacturer_id(int chgnum, int *id) -{ - return EC_ERROR_UNIMPLEMENTED; -} - -static enum ec_error_list bd9995x_device_id(int chgnum, int *id) -{ - return ch_raw_read16(chgnum, BD9995X_CMD_CHIP_ID, id, - BD9995X_EXTENDED_COMMAND); -} - -static enum ec_error_list bd9995x_get_option(int chgnum, int *option) -{ - int rv; - int reg; - - rv = ch_raw_read16(chgnum, BD9995X_CMD_CHGOP_SET1, option, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - rv = ch_raw_read16(chgnum, BD9995X_CMD_CHGOP_SET2, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - *option |= reg << 16; - - return EC_SUCCESS; -} - -static enum ec_error_list bd9995x_set_option(int chgnum, int option) -{ - int rv; - - rv = ch_raw_write16(chgnum, BD9995X_CMD_CHGOP_SET1, option & 0xFFFF, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - return ch_raw_write16(chgnum, BD9995X_CMD_CHGOP_SET2, - (option >> 16) & 0xFFFF, - BD9995X_EXTENDED_COMMAND); -} - -/* Charger interfaces */ - -static const struct charger_info *bd9995x_get_info(int chgnum) -{ - return &bd9995x_charger_info; -} - -static enum ec_error_list bd9995x_get_status(int chgnum, int *status) -{ - int rv; - int reg; - int ch_status; - - /* charger level */ - *status = CHARGER_LEVEL_2; - - /* charger enable/inhibit */ - rv = ch_raw_read16(chgnum, BD9995X_CMD_CHGOP_SET2, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - if (!(reg & BD9995X_CMD_CHGOP_SET2_CHG_EN)) - *status |= CHARGER_CHARGE_INHIBITED; - - /* charger alarm enable/inhibit */ - rv = ch_raw_read16(chgnum, BD9995X_CMD_PROCHOT_CTRL_SET, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - if (!(reg & (BD9995X_CMD_PROCHOT_CTRL_SET_PROCHOT_EN4 | - BD9995X_CMD_PROCHOT_CTRL_SET_PROCHOT_EN3 | - BD9995X_CMD_PROCHOT_CTRL_SET_PROCHOT_EN2 | - BD9995X_CMD_PROCHOT_CTRL_SET_PROCHOT_EN1 | - BD9995X_CMD_PROCHOT_CTRL_SET_PROCHOT_EN0))) - *status |= CHARGER_ALARM_INHIBITED; - - rv = bd9995x_get_charger_op_status(chgnum, ®); - if (rv) - return rv; - - /* power fail */ - if (!(reg & BD9995X_CMD_CHGOP_STATUS_RBOOST_UV)) - *status |= CHARGER_POWER_FAIL; - - /* Safety signal ranges & battery presence */ - ch_status = (reg & BD9995X_BATTTEMP_MASK) >> 8; - - *status |= CHARGER_BATTERY_PRESENT; - - switch (ch_status) { - case BD9995X_CMD_CHGOP_STATUS_BATTEMP_COLD1: - *status |= CHARGER_RES_COLD; - break; - case BD9995X_CMD_CHGOP_STATUS_BATTEMP_COLD2: - *status |= CHARGER_RES_COLD; - *status |= CHARGER_RES_UR; - break; - case BD9995X_CMD_CHGOP_STATUS_BATTEMP_HOT1: - case BD9995X_CMD_CHGOP_STATUS_BATTEMP_HOT2: - *status |= CHARGER_RES_HOT; - break; - case BD9995X_CMD_CHGOP_STATUS_BATTEMP_HOT3: - *status |= CHARGER_RES_HOT; - *status |= CHARGER_RES_OR; - break; - case BD9995X_CMD_CHGOP_STATUS_BATTEMP_BATOPEN: - *status &= ~CHARGER_BATTERY_PRESENT; - default: - break; - } - - /* source of power */ - if (bd9995x_is_vbus_provided(BD9995X_CHARGE_PORT_BOTH)) - *status |= CHARGER_AC_PRESENT; - - return EC_SUCCESS; -} - -static enum ec_error_list bd9995x_set_mode(int chgnum, int mode) -{ - int rv; - - if (mode & CHARGE_FLAG_POR_RESET) { - rv = bd9995x_por_reset(chgnum); - if (rv) - return rv; - } - - if (mode & CHARGE_FLAG_RESET_TO_ZERO) { - rv = bd9995x_reset_to_zero(chgnum); - if (rv) - return rv; - } - - return EC_SUCCESS; -} - -static enum ec_error_list bd9995x_get_current(int chgnum, int *current) -{ - return ch_raw_read16(chgnum, BD9995X_CMD_CHG_CURRENT, current, - BD9995X_BAT_CHG_COMMAND); -} - -static enum ec_error_list bd9995x_set_current(int chgnum, int current) -{ - int rv; - int chg_enable = 1; - - /* Charge current step 64 mA */ - current &= ~0x3F; - - if (current < BD9995X_NO_BATTERY_CHARGE_I_MIN && - (battery_is_present() != BP_YES || battery_is_cut_off())) - current = BD9995X_NO_BATTERY_CHARGE_I_MIN; - - /* - * Disable charger before setting charge current to 0 or when - * discharging on AC. - * If charging current is set to 0mA during charging, reference of - * the charge current feedback amp (VREF_CHG) is set to 0V. Hence - * the DCDC stops switching (because of the EA offset). - */ - if (!current || bd9995x_is_discharging_on_ac(chgnum)) { - chg_enable = 0; - rv = bd9995x_charger_enable(chgnum, 0); - if (rv) - return rv; - } - - rv = ch_raw_write16(chgnum, BD9995X_CMD_IPRECH_SET, - MIN(current, BD9995X_IPRECH_MAX), - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - rv = ch_raw_write16(chgnum, BD9995X_CMD_CHG_CURRENT, current, - BD9995X_BAT_CHG_COMMAND); - if (rv) - return rv; - - /* - * Enable charger if charge current is non-zero or not discharging - * on AC. - */ - return chg_enable ? bd9995x_charger_enable(chgnum, 1) : EC_SUCCESS; -} - -static enum ec_error_list bd9995x_get_voltage(int chgnum, int *voltage) -{ - if (vsys_priority) { - int batt_volt_measured; - int reg; - int rv; - - /* Get battery voltage as reported by charger */ - batt_volt_measured = bd9995x_get_battery_voltage(); - if (batt_volt_measured > (battery_get_info()->voltage_min + - BD9995X_VSYS_PRECHARGE_OFFSET_MV)) { - /* - * Battery is not deeply discharged. Clear the - * VSYS_PRIORITY bit to ensure that input current limit - * is always active. - */ - mutex_lock(&bd9995x_vin_mutex); - if (!ch_raw_read16(chgnum, BD9995X_CMD_VIN_CTRL_SET, - ®, BD9995X_EXTENDED_COMMAND)) { - reg &= ~BD9995X_CMD_VIN_CTRL_SET_VSYS_PRIORITY; - rv = ch_raw_write16(chgnum, - BD9995X_CMD_VIN_CTRL_SET, - reg, - BD9995X_EXTENDED_COMMAND); - - /* Mirror the state of this bit */ - if (!rv) - vsys_priority = 0; - } - mutex_unlock(&bd9995x_vin_mutex); - } - } - - return ch_raw_read16(chgnum, BD9995X_CMD_CHG_VOLTAGE, voltage, - BD9995X_BAT_CHG_COMMAND); -} - -static enum ec_error_list bd9995x_set_voltage(int chgnum, int voltage) -{ - const int battery_voltage_max = battery_get_info()->voltage_max; - - /* - * Regulate the system voltage to battery max if the battery - * is not present or the battery is discharging on AC. - */ - if (voltage == 0 || - bd9995x_is_discharging_on_ac(chgnum) || - battery_is_present() != BP_YES || - battery_is_cut_off() || - voltage > battery_voltage_max) - voltage = battery_voltage_max; - - /* Charge voltage step 16 mV */ - voltage &= ~0x0F; - - /* Assumes charger's voltage_min < battery's voltage_max */ - if (voltage < bd9995x_charger_info.voltage_min) - voltage = bd9995x_charger_info.voltage_min; - - return bd9995x_set_vfastchg(chgnum, voltage); -} - -static void bd9995x_battery_charging_profile_settings(int chgnum) -{ - const struct battery_info *bi = battery_get_info(); - - /* Input Current Limit Setting */ - bd9995x_set_input_current_limit(chgnum, CONFIG_CHARGER_INPUT_CURRENT); - - /* Charge Termination Current Setting */ - ch_raw_write16(chgnum, BD9995X_CMD_ITERM_SET, 0, - BD9995X_EXTENDED_COMMAND); - - /* Trickle-charge Current Setting */ - ch_raw_write16(chgnum, BD9995X_CMD_ITRICH_SET, - bi->precharge_current & 0x07C0, - BD9995X_EXTENDED_COMMAND); - - bd9995x_set_vfastchg(chgnum, bi->voltage_max); - - /* Set Pre-charge Voltage Threshold for trickle charging. */ - ch_raw_write16(chgnum, BD9995X_CMD_VPRECHG_TH_SET, - (bi->voltage_min - 1000) & 0x7FC0, - BD9995X_EXTENDED_COMMAND); - - /* Re-charge Battery Voltage Setting */ - ch_raw_write16(chgnum, BD9995X_CMD_VRECHG_SET, - bi->voltage_max & 0x7FF0, - BD9995X_EXTENDED_COMMAND); - - /* Set battery OVP to 500 + maximum battery voltage */ - ch_raw_write16(chgnum, BD9995X_CMD_VBATOVP_SET, - (bi->voltage_max + 500) & 0x7ff0, - BD9995X_EXTENDED_COMMAND); - - /* Reverse buck boost voltage Setting */ - ch_raw_write16(chgnum, BD9995X_CMD_VRBOOST_SET, 0, - BD9995X_EXTENDED_COMMAND); - - /* Disable fast/pre-charging watchdog */ - ch_raw_write16(chgnum, BD9995X_CMD_CHGWDT_SET, 0, - BD9995X_EXTENDED_COMMAND); - - /* TODO(crosbug.com/p/55626): Set VSYSVAL_THH/THL appropriately */ -} - -/* - * Note: opting not to use charger driver init here due to the different - * priority (other drivers use HOOK_PRIO_INIT_I2C + 1) - */ -static void bd9995x_init(void) -{ - int reg; - - /* - * Disable charging trigger by BC1.2 on VCC & VBUS and - * automatic limitation of the input current. - */ - if (ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_CHGOP_SET1, ®, - BD9995X_EXTENDED_COMMAND)) - return; - reg |= (BD9995X_CMD_CHGOP_SET1_SDP_CHG_TRIG_EN | - BD9995X_CMD_CHGOP_SET1_SDP_CHG_TRIG | - BD9995X_CMD_CHGOP_SET1_VBUS_BC_DISEN | - BD9995X_CMD_CHGOP_SET1_VCC_BC_DISEN | - BD9995X_CMD_CHGOP_SET1_ILIM_AUTO_DISEN | - BD9995X_CMD_CHGOP_SET1_SDP_500_SEL | - BD9995X_CMD_CHGOP_SET1_DCP_2500_SEL); - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_CHGOP_SET1, reg, - BD9995X_EXTENDED_COMMAND); - - /* - * OTP setting for this register is 6.08V. Set VSYS to above battery max - * (as is done when charger is disabled) to ensure VSYSREG_SET > VBAT so - * that the charger is in Pre-Charge state and that the input current - * disable setting below will be active. - */ - bd9995x_set_vsysreg(CHARGER_SOLO, battery_get_info()->voltage_max + - BD9995X_VSYS_PRECHARGE_OFFSET_MV); - - /* Enable BC1.2 USB charging and DC/DC converter @ 1200KHz */ - if (ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_CHGOP_SET2, ®, - BD9995X_EXTENDED_COMMAND)) - return; - reg &= ~(BD9995X_CMD_CHGOP_SET2_USB_SUS | - BD9995X_CMD_CHGOP_SET2_DCDC_CLK_SEL); - reg |= BD9995X_CMD_CHGOP_SET2_DCDC_CLK_SEL_1200; -#ifdef CONFIG_CHARGER_BD9995X_CHGEN - reg |= BD9995X_CMD_CHGOP_SET2_CHG_EN; -#endif - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_CHGOP_SET2, reg, - BD9995X_EXTENDED_COMMAND); - - /* - * We disable IADP (here before setting IBUS_LIM_SET and ICC_LIM_SET) - * to prevent voltage on IADP/RESET pin from affecting SEL_ILIM_VAL. - */ - if (ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_VM_CTRL_SET, ®, - BD9995X_EXTENDED_COMMAND)) - return; - reg &= ~BD9995X_CMD_VM_CTRL_SET_EXTIADPEN; - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_VM_CTRL_SET, reg, - BD9995X_EXTENDED_COMMAND); - /* - * Disable the input current limit when VBAT is < VSYSREG_SET. This - * needs to be done before calling - * bd9995x_battery_charging_profile_settings() as in that function the - * input current limit is set to CONFIG_CHARGER_INPUT_CURRENT which is - * 512 mA. In deeply discharged battery cases, setting the input current - * limit this low can cause VSYS to collapse, which in turn can cause - * the EC's brownout detector to reset the EC. - */ - if (ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_VIN_CTRL_SET, ®, - BD9995X_EXTENDED_COMMAND)) - return; - reg |= BD9995X_CMD_VIN_CTRL_SET_VSYS_PRIORITY; - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_VIN_CTRL_SET, reg, - BD9995X_EXTENDED_COMMAND); - /* Mirror the state of this bit */ - vsys_priority = 1; - - /* Define battery charging profile */ - bd9995x_battery_charging_profile_settings(CHARGER_SOLO); - - /* Power save mode when VBUS/VCC is removed. */ -#ifdef CONFIG_BD9995X_POWER_SAVE_MODE - bd9995x_set_power_save_mode(CONFIG_BD9995X_POWER_SAVE_MODE); -#else - bd9995x_set_power_save_mode(BD9995X_PWR_SAVE_OFF); -#endif - -#ifdef CONFIG_USB_PD_DISCHARGE - /* Set VBUS / VCC detection threshold for discharge enable */ - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_VBUS_TH_SET, - BD9995X_VBUS_DISCHARGE_TH, BD9995X_EXTENDED_COMMAND); - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_VCC_TH_SET, - BD9995X_VBUS_DISCHARGE_TH, BD9995X_EXTENDED_COMMAND); -#endif - - /* Unlock debug regs */ - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_PROTECT_SET, 0x3c, - BD9995X_EXTENDED_COMMAND); - - /* Undocumented - reverse current threshold = -50mV */ - ch_raw_write16(CHARGER_SOLO, 0x14, 0x0202, BD9995X_DEBUG_COMMAND); - /* Undocumented - internal gain = 2x */ - ch_raw_write16(CHARGER_SOLO, 0x1a, 0x80, BD9995X_DEBUG_COMMAND); - - /* Re-lock debug regs */ - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_PROTECT_SET, 0x0, - BD9995X_EXTENDED_COMMAND); -} -DECLARE_HOOK(HOOK_INIT, bd9995x_init, HOOK_PRIO_INIT_EXTPOWER); - -static enum ec_error_list bd9995x_post_init(int chgnum) -{ - return EC_SUCCESS; -} - -static enum ec_error_list bd9995x_discharge_on_ac(int chgnum, int enable) -{ - int rv; - int reg; - - rv = ch_raw_read16(chgnum, BD9995X_CMD_CHGOP_SET2, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - /* - * Suspend USB charging and DC/DC converter so that BATT_LEARN mode - * doesn't auto exit if VBAT < VSYSVAL_THL_SET and also it helps to - * discharge VBUS quickly when charging is not allowed and the AC - * is removed. - */ - if (enable) - reg |= BD9995X_CMD_CHGOP_SET2_BATT_LEARN | - BD9995X_CMD_CHGOP_SET2_USB_SUS; - else - reg &= ~(BD9995X_CMD_CHGOP_SET2_BATT_LEARN | - BD9995X_CMD_CHGOP_SET2_USB_SUS); - - return ch_raw_write16(chgnum, BD9995X_CMD_CHGOP_SET2, reg, - BD9995X_EXTENDED_COMMAND); -} - -static enum ec_error_list bd9995x_get_vbus_voltage(int chgnum, int port, - int *voltage) -{ - uint8_t read_reg; - - read_reg = (port == BD9995X_CHARGE_PORT_VBUS) ? BD9995X_CMD_VBUS_VAL : - BD9995X_CMD_VCC_VAL; - - return ch_raw_read16(chgnum, read_reg, voltage, - BD9995X_EXTENDED_COMMAND); -} - -/*** Non-standard interface functions ***/ - -int bd9995x_is_vbus_provided(enum bd9995x_charge_port port) -{ - int reg; - - if (ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_VBUS_VCC_STATUS, ®, - BD9995X_EXTENDED_COMMAND)) - return 0; - - if (port == BD9995X_CHARGE_PORT_VBUS) - reg &= BD9995X_CMD_VBUS_VCC_STATUS_VBUS_DETECT; - else if (port == BD9995X_CHARGE_PORT_VCC) - reg &= BD9995X_CMD_VBUS_VCC_STATUS_VCC_DETECT; - else if (port == BD9995X_CHARGE_PORT_BOTH) { - /* Check VBUS on either port */ - reg &= (BD9995X_CMD_VBUS_VCC_STATUS_VCC_DETECT | - BD9995X_CMD_VBUS_VCC_STATUS_VBUS_DETECT); - } else - reg = 0; - - return !!reg; -} - -#ifdef CONFIG_BD9995X_DELAY_INPUT_PORT_SELECT -static int bd9995x_select_input_port_private(enum bd9995x_charge_port port, - int select) -#else -int bd9995x_select_input_port(enum bd9995x_charge_port port, int select) -#endif -{ - int rv; - int reg; - - mutex_lock(&bd9995x_vin_mutex); - rv = ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_VIN_CTRL_SET, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - goto select_input_port_exit; - - if (select) { - if (port == BD9995X_CHARGE_PORT_VBUS) { - reg |= BD9995X_CMD_VIN_CTRL_SET_VBUS_EN; - reg &= ~BD9995X_CMD_VIN_CTRL_SET_VCC_EN; - } else if (port == BD9995X_CHARGE_PORT_VCC) { - reg |= BD9995X_CMD_VIN_CTRL_SET_VCC_EN; - reg &= ~BD9995X_CMD_VIN_CTRL_SET_VBUS_EN; - } else if (port == BD9995X_CHARGE_PORT_BOTH) { - /* Enable both the ports for PG3 */ - reg |= BD9995X_CMD_VIN_CTRL_SET_VBUS_EN | - BD9995X_CMD_VIN_CTRL_SET_VCC_EN; - } else { - /* Invalid charge port */ - panic("Invalid charge port"); - } - } else { - if (port == BD9995X_CHARGE_PORT_VBUS) - reg &= ~BD9995X_CMD_VIN_CTRL_SET_VBUS_EN; - else if (port == BD9995X_CHARGE_PORT_VCC) - reg &= ~BD9995X_CMD_VIN_CTRL_SET_VCC_EN; - else if (port == BD9995X_CHARGE_PORT_BOTH) - reg &= ~(BD9995X_CMD_VIN_CTRL_SET_VBUS_EN | - BD9995X_CMD_VIN_CTRL_SET_VCC_EN); - else - panic("Invalid charge port"); - } - - rv = ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_VIN_CTRL_SET, reg, - BD9995X_EXTENDED_COMMAND); -select_input_port_exit: - mutex_unlock(&bd9995x_vin_mutex); - return rv; -} - -#ifdef CONFIG_BD9995X_DELAY_INPUT_PORT_SELECT -int bd9995x_select_input_port(enum bd9995x_charge_port port, int select) -{ - port_update = port; - select_update = select; - vbus_state = START; - select_input_port_update = 1; - task_wake(TASK_ID_USB_CHG); - - return EC_SUCCESS; -} - -static inline int bd9995x_vbus_test(int value, int limit) -{ - uint32_t hi_value = limit + VBUS_DELTA; - uint32_t lo_value = limit - VBUS_DELTA; - - return ((value > lo_value) && (value < hi_value)); -} - -static int bd9995x_vbus_debounce(int chgnum, enum bd9995x_charge_port port) -{ - int vbus_reg; - int voltage; - - vbus_reg = (port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_VBUS_VAL : BD9995X_CMD_VCC_VAL; - if (ch_raw_read16(chgnum, vbus_reg, &voltage, BD9995X_EXTENDED_COMMAND)) - voltage = 0; - - if (!bd9995x_vbus_test(voltage, vbus_voltage)) { - vbus_voltage = voltage; - debounce_time = get_time().val + VBUS_MSEC; - } else { - if (get_time().val >= debounce_time) - return 1; - } - - return 0; -} -#endif - - -#ifdef CONFIG_CHARGER_BATTERY_TSENSE -int bd9995x_get_battery_temp(int *temp_ptr) -{ - int rv; - - rv = ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_THERM_VAL, temp_ptr, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - /* Degrees C = 200 - THERM_VAL, range is -55C-200C, 1C steps */ - *temp_ptr = 200 - *temp_ptr; - return EC_SUCCESS; -} -#endif - -void bd9995x_set_power_save_mode(int mode) -{ - ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_SMBREG, mode, - BD9995X_EXTENDED_COMMAND); -} - -int bd9995x_get_battery_voltage(void) -{ - int vbat_val, rv; - - rv = ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_VBAT_VAL, &vbat_val, - BD9995X_EXTENDED_COMMAND); - - return rv ? 0 : vbat_val; -} - -#ifdef HAS_TASK_USB_CHG -int bd9995x_bc12_enable_charging(int port, int enable) -{ - int rv; - int reg; - int mask_val; - - /* - * For BC1.2, enable VBUS/VCC_BC_DISEN charging trigger by BC1.2 - * detection and disable SDP_CHG_TRIG, SDP_CHG_TRIG_EN. Vice versa - * for USB-C. - */ - rv = ch_raw_read16(CHARGER_SOLO, BD9995X_CMD_CHGOP_SET1, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - mask_val = (BD9995X_CMD_CHGOP_SET1_SDP_CHG_TRIG_EN | - BD9995X_CMD_CHGOP_SET1_SDP_CHG_TRIG | - ((port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_CHGOP_SET1_VBUS_BC_DISEN : - BD9995X_CMD_CHGOP_SET1_VCC_BC_DISEN)); - - if (enable) - reg &= ~mask_val; - else - reg |= mask_val; - - return ch_raw_write16(CHARGER_SOLO, BD9995X_CMD_CHGOP_SET1, reg, - BD9995X_EXTENDED_COMMAND); -} - -static void bd9995x_set_switches(int port, enum usb_switch setting) -{ - /* If switch is not changing then return */ - if (setting == usb_switch_state[port]) - return; - - if (setting != USB_SWITCH_RESTORE) - usb_switch_state[port] = setting; - - /* ensure we disable power saving when we are using DP/DN */ -#ifdef CONFIG_BD9995X_POWER_SAVE_MODE - bd9995x_set_power_save_mode( - (usb_switch_state[0] == USB_SWITCH_DISCONNECT && - usb_switch_state[1] == USB_SWITCH_DISCONNECT) - ? CONFIG_BD9995X_POWER_SAVE_MODE : BD9995X_PWR_SAVE_OFF); -#endif - - bd9995x_update_ucd_set_reg(CHARGER_SOLO, port, - BD9995X_CMD_UCD_SET_USB_SW, - usb_switch_state[port] == USB_SWITCH_CONNECT); -} - -void bd9995x_vbus_interrupt(enum gpio_signal signal) -{ - task_wake(TASK_ID_USB_CHG); -} - -static void bd9995x_usb_charger_task(const int unused) -{ - static int initialized; - int changed, port, interrupts; - int sleep_usec; - uint64_t bc12_det_mark[CONFIG_USB_PD_PORT_MAX_COUNT]; -#ifdef CONFIG_USB_PD_DISCHARGE - int vbus_reg, voltage; -#endif - -#ifdef CONFIG_BD9995X_DELAY_INPUT_PORT_SELECT - select_input_port_update = 0; - vbus_voltage = 0; -#endif - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - bc12_detected_type[port] = CHARGE_SUPPLIER_NONE; - bd9995x_enable_vbus_detect_interrupts(CHARGER_SOLO, port, 1); - bc12_det_mark[port] = 0; - } - - while (1) { - sleep_usec = -1; - changed = 0; - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - /* Get port interrupts */ - interrupts = bd9995x_get_interrupts(CHARGER_SOLO, port); - if (interrupts & BD9995X_CMD_INT_VBUS_DET || - !initialized) { - /* - * Detect based on current state of VBUS. If - * VBUS is provided, then need to wait for - * bc12_type to be available. If VBUS is not - * provided, then disable wait for this port. - */ - bc12_det_mark[port] = - usb_charger_process(CHARGER_SOLO, port) - ? get_time().val + BC12_DETECT_US : 0; - changed = 1; - } -#ifdef CONFIG_USB_PD_DISCHARGE - if (interrupts & BD9995X_CMD_INT_VBUS_TH || - !initialized) { - /* Get VBUS voltage */ - vbus_reg = (port == BD9995X_CHARGE_PORT_VBUS) ? - BD9995X_CMD_VBUS_VAL : - BD9995X_CMD_VCC_VAL; - if (ch_raw_read16(CHARGER_SOLO, vbus_reg, - &voltage, - BD9995X_EXTENDED_COMMAND)) - voltage = 0; - - /* Set discharge accordingly */ - pd_set_vbus_discharge(port, - voltage < BD9995X_VBUS_DISCHARGE_TH); - changed = 1; - } -#endif - if (bc12_det_mark[port] && (get_time().val > - bc12_det_mark[port])) { - /* - * bc12_type result should be available. If not - * available still, then function will return - * 1. Set up additional 100 msec wait. Note that - * if VBUS is no longer provided when this call - * happens the function will return 0. - */ - bc12_det_mark[port] = - bd9995x_bc12_check_type(CHARGER_SOLO, - port) ? - get_time().val + 100 * MSEC : 0; - /* Reset BC1.2 regs to skip auto-detection. */ - bd9995x_bc12_detect(CHARGER_SOLO, port, 0); - } - - /* - * Determine if a wait for reading bc12_type needs to be - * scheduled. Use the scheduled wait for this port if - * it's less than the wait needed for a previous - * port. If previous port(s) don't need a wait, then - * sleep_usec will be -1. - */ - if (bc12_det_mark[port]) { - int bc12_wait_usec; - - bc12_wait_usec = bc12_det_mark[port] - - get_time().val; - if ((sleep_usec < 0) || - (sleep_usec > bc12_wait_usec)) - sleep_usec = bc12_wait_usec; - } - } - - initialized = 1; -#ifdef CONFIG_BD9995X_DELAY_INPUT_PORT_SELECT -/* - * When a charge port is selected and VBUS is 5V, the inrush current on some - * devices causes VBUS to droop, which could signal a sink disconnection. - * - * To mitigate the problem, charge port selection is delayed until VBUS - * is stable or one second has passed. Hopefully PD has negotiated a VBUS - * voltage of at least 9V before the one second timeout. - */ - if (select_input_port_update) { - sleep_usec = VBUS_CHECK_MSEC; - changed = 0; - - switch (vbus_state) { - case START: - vbus_timeout = get_time().val + STABLE_TIMEOUT; - vbus_state = STABLE; - break; - case STABLE: - if (get_time().val > vbus_timeout) { - vbus_state = DEBOUNCE; - vbus_timeout = get_time().val + - DEBOUNCE_TIMEOUT; - } - break; - case DEBOUNCE: - if (bd9995x_vbus_debounce(CHARGER_SOLO, port_update) || - get_time().val > vbus_timeout) { - select_input_port_update = 0; - bd9995x_select_input_port_private( - port_update, select_update); - } - break; - } - } -#endif - - /* - * Re-read interrupt registers immediately if we got an - * interrupt. We're dealing with multiple independent - * interrupt sources and the interrupt pin may have - * never deasserted if both sources were not in clear - * state simultaneously. - */ - if (!changed) - task_wait_event(sleep_usec); - } -} -#endif /* HAS_TASK_USB_CHG */ - - -/*** Console commands ***/ -#ifdef CONFIG_CMD_CHARGER_DUMP -static int read_bat(int chgnum, uint8_t cmd) -{ - int read = 0; - - ch_raw_read16(chgnum, cmd, &read, BD9995X_BAT_CHG_COMMAND); - return read; -} - -static int read_ext(int chgnum, uint8_t cmd) -{ - int read = 0; - - ch_raw_read16(chgnum, cmd, &read, BD9995X_EXTENDED_COMMAND); - return read; -} - -/* Dump all readable registers on bd9995x */ -static int console_bd9995x_dump_regs(int argc, char **argv) -{ - int i; - uint8_t regs[] = { 0x14, 0x15, 0x3c, 0x3d, 0x3e, 0x3f }; - - /* Battery group registers */ - for (i = 0; i < ARRAY_SIZE(regs); ++i) - ccprintf("BAT REG %4x: %4x\n", regs[i], read_bat(CHARGER_SOLO, - regs[i])); - - /* Extended group registers */ - for (i = 0; i < 0x7f; ++i) { - ccprintf("EXT REG %4x: %4x\n", i, read_ext(CHARGER_SOLO, i)); - cflush(); - } - - return 0; -} -DECLARE_CONSOLE_COMMAND(charger_dump, console_bd9995x_dump_regs, - NULL, - "Dump all charger registers"); -#endif /* CONFIG_CMD_CHARGER_DUMP */ - -#ifdef CONFIG_CMD_CHARGER -static int console_command_bd9995x(int argc, char **argv) -{ - int rv, reg, data, val; - char rw, *e; - enum bd9995x_command cmd; - - if (argc < 4) - return EC_ERROR_PARAM_COUNT; - - rw = argv[1][0]; - if (rw == 'w' && argc < 5) - return EC_ERROR_PARAM_COUNT; - else if (rw != 'w' && rw != 'r') - return EC_ERROR_PARAM1; - - reg = strtoi(argv[2], &e, 16); - if (*e || reg < 0) - return EC_ERROR_PARAM2; - - cmd = strtoi(argv[3], &e, 0); - if (*e || cmd < 0) - return EC_ERROR_PARAM3; - - if (rw == 'r') - rv = ch_raw_read16(CHARGER_SOLO, reg, &data, cmd); - else { - val = strtoi(argv[4], &e, 16); - if (*e || val < 0) - return EC_ERROR_PARAM4; - - rv = ch_raw_write16(CHARGER_SOLO, reg, val, cmd); - if (rv == EC_SUCCESS) - rv = ch_raw_read16(CHARGER_SOLO, reg, &data, cmd); - } - - if (rv == EC_SUCCESS) - CPRINTS("register 0x%x [%d] = 0x%x [%d]", reg, reg, data, data); - - return rv; -} -DECLARE_CONSOLE_COMMAND(bd9995x, console_command_bd9995x, - "bd9995x <r/w> <reg_hex> <cmd_type> | <val_hex>", - "Read or write a charger register"); -#endif /* CONFIG_CMD_CHARGER */ - -#ifdef CONFIG_CHARGER_PSYS_READ -static int bd9995x_psys_charger_adc(int chgnum) -{ - int i; - int reg; - uint64_t ipmon = 0; - - for (i = 0; i < BD9995X_PMON_IOUT_ADC_READ_COUNT; i++) { - if (ch_raw_read16(chgnum, BD9995X_CMD_PMON_DACIN_VAL, ®, - BD9995X_EXTENDED_COMMAND)) - return 0; - - /* Conversion Interval is 200us */ - usleep(200); - ipmon += reg; - } - - /* - * Calculate power in mW - * PSYS = VACP×IACP+VBAT×IBAT = IPMON / GPMON - */ - return (int) ((ipmon * 1000) / (BIT(BD9995X_PSYS_GAIN_SELECT) * - BD9995X_PMON_IOUT_ADC_READ_COUNT)); -} - -static int bd9995x_enable_psys(int chgnum) -{ - int rv; - int reg; - - rv = ch_raw_read16(chgnum, BD9995X_CMD_PMON_IOUT_CTRL_SET, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - /* Enable PSYS & Select PSYS Gain */ - reg &= ~BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_GAIN_SET_MASK; - reg |= (BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_INSEL | - BD9995X_CMD_PMON_IOUT_CTRL_SET_PMON_OUT_EN | - BD9995X_PSYS_GAIN_SELECT); - - return ch_raw_write16(chgnum, BD9995X_CMD_PMON_IOUT_CTRL_SET, reg, - BD9995X_EXTENDED_COMMAND); -} - -/** - * Get system power. - * - * TODO(b:71520677): Implement charger_get_system_power, disable psys readout - * when not needed (the code below leaves it enabled after the first access), - * update "psys" console command to use charger_get_system_power and move it - * to some common code. - */ -static int console_command_psys(int argc, char **argv) -{ - int rv; - - rv = bd9995x_enable_psys(CHARGER_SOLO); - if (rv) - return rv; - - CPRINTS("PSYS from chg_adc: %d mW", - bd9995x_psys_charger_adc(CHARGER_SOLO)); - - return EC_SUCCESS; -} -DECLARE_CONSOLE_COMMAND(psys, console_command_psys, - NULL, - "Get the system power in mW"); -#endif /* CONFIG_CHARGER_PSYS_READ */ - -#ifdef CONFIG_CMD_CHARGER_ADC_AMON_BMON -static int bd9995x_amon_bmon_chg_adc(int chgnum) -{ - int i; - int reg; - int iout = 0; - - for (i = 0; i < BD9995X_PMON_IOUT_ADC_READ_COUNT; i++) { - ch_raw_read16(chgnum, BD9995X_CMD_IOUT_DACIN_VAL, ®, - BD9995X_EXTENDED_COMMAND); - iout += reg; - - /* Conversion Interval is 200us */ - usleep(200); - } - - /* - * Discharge current in mA - * IDCHG = iout * GIDCHG - * IADP = iout * GIADP - * - * VIDCHG = GIDCHG * (VSRN- VSRP) = GIDCHG * IDCHG / IDCHG_RES - * VIADP = GIADP * (VACP- VACN) = GIADP * IADP / IADP_RES - */ - return (iout * (5 << BD9995X_IOUT_GAIN_SELECT)) / - (10 * BD9995X_PMON_IOUT_ADC_READ_COUNT); -} - -static int bd9995x_amon_bmon(int chgnum, int amon_bmon) -{ - int rv; - int reg; - int imon; - int sns_res; - - rv = ch_raw_read16(chgnum, BD9995X_CMD_PMON_IOUT_CTRL_SET, ®, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - /* Enable monitor */ - reg &= ~BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_GAIN_SET_MASK; - reg |= (BD9995X_CMD_PMON_IOUT_CTRL_SET_IMON_INSEL | - BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_OUT_EN | - (BD9995X_IOUT_GAIN_SELECT << 4)); - - if (amon_bmon) { - reg |= BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_SOURCE_SEL; - sns_res = CONFIG_CHARGER_SENSE_RESISTOR_AC; - } else { - reg &= ~BD9995X_CMD_PMON_IOUT_CTRL_SET_IOUT_SOURCE_SEL; - sns_res = CONFIG_CHARGER_SENSE_RESISTOR; - } - - rv = ch_raw_write16(chgnum, BD9995X_CMD_PMON_IOUT_CTRL_SET, reg, - BD9995X_EXTENDED_COMMAND); - if (rv) - return rv; - - imon = bd9995x_amon_bmon_chg_adc(chgnum); - - CPRINTS("%cMON from chg_adc: %d uV, %d mA]", - amon_bmon ? 'A' : 'B', - imon * sns_res, - imon); - - return EC_SUCCESS; -} - -/** - * Get charger AMON and BMON current. - */ -static int console_command_amon_bmon(int argc, char **argv) -{ - int rv = EC_ERROR_PARAM1; - - /* Switch to AMON */ - if (argc == 1 || (argc >= 2 && argv[1][0] == 'a')) - rv = bd9995x_amon_bmon(CHARGER_SOLO, 1); - - /* Switch to BMON */ - if (argc == 1 || (argc >= 2 && argv[1][0] == 'b')) - rv = bd9995x_amon_bmon(CHARGER_SOLO, 0); - - return rv; -} -DECLARE_CONSOLE_COMMAND(amonbmon, console_command_amon_bmon, - "amonbmon [a|b]", - "Get charger AMON/BMON voltage diff, current"); -#endif /* CONFIG_CMD_CHARGER_ADC_AMON_BMON */ - -#ifdef CONFIG_CMD_I2C_STRESS_TEST_CHARGER -static int bd9995x_i2c_read(const int reg, int *data) -{ - return ch_raw_read16(CHARGER_SOLO, reg, data, BD9995X_EXTENDED_COMMAND); -} - -static int bd9995x_i2c_write(const int reg, int data) -{ - return ch_raw_write16(CHARGER_SOLO, reg, data, - BD9995X_EXTENDED_COMMAND); -} - -/* BD9995X_CMD_CHIP_ID register value may vary by chip. */ -struct i2c_stress_test_dev bd9995x_i2c_stress_test_dev = { - .reg_info = { - .read_reg = BD9995X_CMD_CHIP_ID, - .read_val = BD99956_CHIP_ID, - .write_reg = BD9995X_CMD_ITRICH_SET, - }, - .i2c_read_dev = &bd9995x_i2c_read, - .i2c_write_dev = &bd9995x_i2c_write, -}; -#endif /* CONFIG_CMD_I2C_STRESS_TEST_CHARGER */ - -const struct charger_drv bd9995x_drv = { - .post_init = &bd9995x_post_init, - .get_info = &bd9995x_get_info, - .get_status = &bd9995x_get_status, - .set_mode = &bd9995x_set_mode, - .get_current = &bd9995x_get_current, - .set_current = &bd9995x_set_current, - .get_voltage = &bd9995x_get_voltage, - .set_voltage = &bd9995x_set_voltage, - .discharge_on_ac = &bd9995x_discharge_on_ac, - .get_vbus_voltage = &bd9995x_get_vbus_voltage, - .set_input_current_limit = &bd9995x_set_input_current_limit, - .get_input_current_limit = &bd9995x_get_input_current_limit, - .manufacturer_id = &bd9995x_manufacturer_id, - .device_id = &bd9995x_device_id, - .get_option = &bd9995x_get_option, - .set_option = &bd9995x_set_option, -}; - -#ifdef CONFIG_BC12_SINGLE_DRIVER -/* provide a default bc12_ports[] for backward compatibility */ -struct bc12_config bc12_ports[BD9995X_CHARGE_PORT_COUNT] = { - { - .drv = &(const struct bc12_drv) { - .usb_charger_task = bd9995x_usb_charger_task, - .set_switches = bd9995x_set_switches, -#if defined(CONFIG_CHARGE_RAMP_SW) - .ramp_allowed = bd9995x_ramp_allowed, - .ramp_max = bd9995x_ramp_max, -#endif /* CONFIG_CHARGE_RAMP_SW */ - }, - }, - { - .drv = &(const struct bc12_drv) { - /* bd9995x uses a single task thread for both ports */ - .usb_charger_task = NULL, - .set_switches = bd9995x_set_switches, -#if defined(CONFIG_CHARGE_RAMP_SW) - .ramp_allowed = bd9995x_ramp_allowed, - .ramp_max = bd9995x_ramp_max, -#endif /* CONFIG_CHARGE_RAMP_SW */ - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(bc12_ports) == CHARGE_PORT_COUNT); -#else -/* - * TODO: - * This driver assumes its two ports is always on number 0 and 1. - * Prohibit multiple driver for safety. - */ -#error config not supported -#endif /* CONFIG_BC12_SINGLE_DRIVER */ |