diff options
Diffstat (limited to 'driver/charger/sm5803.h')
| -rw-r--r-- | driver/charger/sm5803.h | 432 |
1 files changed, 0 insertions, 432 deletions
diff --git a/driver/charger/sm5803.h b/driver/charger/sm5803.h deleted file mode 100644 index b7638411e4..0000000000 --- a/driver/charger/sm5803.h +++ /dev/null @@ -1,432 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Silicon Mitus SM5803 Buck-Boost Charger - */ - -#ifndef __CROS_EC_SM5803_H -#define __CROS_EC_SM5803_H - -#include "common.h" - -/* Note: configure charger struct with CHARGER_FLAGS */ -#define SM5803_ADDR_MAIN_FLAGS 0x30 -#define SM5803_ADDR_MEAS_FLAGS 0x31 -#define SM5803_ADDR_CHARGER_FLAGS 0x32 -#define SM5803_ADDR_TEST_FLAGS 0x37 - -/* Main registers (address 0x30) */ - -#define SM5803_REG_CHIP_ID 0x00 - -#define SM5803_REG_STATUS1 0x01 -#define SM5803_STATUS1_VSYS_OK BIT(0) -#define SM5803_STATUS1_VPWR_OK BIT(1) -#define SM5803_STATUS1_VBUS_UVL BIT(3) -#define SM5803_STATUS1_VBUS_SHORT BIT(4) -#define SM5803_STATUS1_VBUS_OVH BIT(5) -#define SM5803_STATUS1_CHG_DET BIT(6) -#define SM5803_STATUS1_BAT_DET BIT(7) - -#define SM5803_REG_STATUS2 0x02 -#define SM5803_STATUS2_BAT_DET_FG BIT(1) -#define SM5803_STATUS2_VBAT_SHORT BIT(0) - -#define SM5803_REG_INT1_REQ 0x05 -#define SM5803_REG_INT1_EN 0x0A -#define SM5803_INT1_VBUS_PWR_HWSAFE_LIMIT BIT(0) -#define SM5803_INT1_CHG BIT(2) -#define SM5803_INT1_BAT BIT(3) -#define SM5803_INT1_CLS_OC BIT(4) -#define SM5803_INT1_SLV_DET BIT(5) -#define SM5803_INT1_SWL_DISCH BIT(6) -#define SM5803_INT1_PREREG BIT(7) - -#define SM5803_REG_INT2_REQ 0x06 -#define SM5803_REG_INT2_EN 0x0B -#define SM5803_INT2_VBATSNSP BIT(0) -#define SM5803_INT2_IBAT_DISCHG BIT(1) -#define SM5803_INT2_IBAT_CHG BIT(2) -#define SM5803_INT2_IBUS BIT(3) -#define SM5803_INT2_VBUS BIT(4) -#define SM5803_INT2_VCHGPWR BIT(5) -#define SM5803_INT2_VSYS BIT(6) -#define SM5803_INT2_TINT BIT(7) - -#define SM5803_REG_INT3_REQ 0x07 -#define SM5803_REG_INT3_EN 0x0C -#define SM5803_INT3_GPADC0 BIT(0) -#define SM5803_INT3_BFET_PWR_LIMIT BIT(1) -#define SM5803_INT3_BFET_PWR_HWSAFE_LIMIT BIT(2) -#define SM5803_INT3_SPARE BIT(3) -#define SM5803_INT3_VBUS_PWR_LIMIT BIT(4) -#define SM5803_INT3_IBAT BIT(5) - -#define SM5803_REG_INT4_REQ 0x08 -#define SM5803_REG_INT4_EN 0x0D -#define SM5803_INT4_CHG_FAIL BIT(0) -#define SM5803_INT4_CHG_DONE BIT(1) -#define SM5803_INT4_CHG_START BIT(2) -#define SM5803_INT4_SLP_EXIT BIT(3) -#define SM5803_INT4_OTG_FAIL BIT(4) -#define SM5803_INT4_CHG_ILIM BIT(5) -#define SM5803_INT4_IBAT_CC BIT(6) -#define SM5803_INT4_CC BIT(7) - -#define SM5803_REG_MISC_CONFIG 0x15 -#define SM5803_MISC_INV_INT BIT(0) -#define SM5803_INT_CLEAR_MODE BIT(1) -#define SM5803_INT_MASK_MODE BIT(2) - -#define SM5803_REG_PLATFORM 0x18 -#define SM5803_PLATFORM_ID GENMASK(4, 0) - -#define SM5803_REG_REFERENCE 0x20 -#define SM5803_REFERENCE_LDO3P3_PGOOD BIT(4) -#define SM5803_REFERENCE_LDO5_PGOOD BIT(5) - -#define SM5803_REG_CLOCK_SEL 0x2A -#define SM5803_CLOCK_SEL_LOW BIT(0) - -#define SM5803_REG_GPIO0_CTRL 0x30 -#define SM5803_GPIO0_VAL BIT(0) -#define SM5803_GPIO0_MODE_MASK GENMASK(2, 1) -#define SM5803_GPIO0_OPEN_DRAIN_EN BIT(6) -#define SM5803_CHG_DET_OPEN_DRAIN_EN BIT(7) - -#define SM5803_REG_VBATSNSP_MEAS_MSB 0x40 -#define SM5803_REG_VBATSNSP_MEAS_LSB 0x41 - -enum sm5803_gpio0_modes { - GPIO0_MODE_PROCHOT, - GPIO0_MODE_OUTPUT, - GPIO0_MODE_INPUT -}; - -#define SM5803_REG_BFET_PWR_MAX_TH 0x35 -#define SM5803_REG_BFET_PWR_HWSAFE_MAX_TH 0x36 - -#define SM5803_REG_PORTS_CTRL 0x40 -#define SM5803_PORTS_VBUS_DISCH BIT(0) -#define SM5803_PORTS_VBUS_PULLDOWN BIT(1) -#define SM5803_PORTS_VBUS_SNS_DISCH BIT(2) -#define SM5803_PORTS_VBUS_SNS_PULLDOWN BIT(3) - -/* ADC Registers (address 0x31) */ - -/* - * Note: Some register bits must be enabled for the DC-DC converter to properly - * handle transitions. - */ -#define SM5803_REG_GPADC_CONFIG1 0x01 -#define SM5803_GPADCC1_VBATSNSP_EN BIT(0) -#define SM5803_GPADCC1_IBAT_DIS_EN BIT(1) -#define SM5803_GPADCC1_IBAT_CHG_EN BIT(2) -#define SM5803_GPADCC1_IBUS_EN BIT(3) -#define SM5803_GPADCC1_VBUS_EN BIT(4) -#define SM5803_GPADCC1_VCHGPWR_EN BIT(5) /* NOTE: DO NOT CLEAR */ -#define SM5803_GPADCC1_VSYS_EN BIT(6) /* NOTE: DO NOT CLEAR */ -#define SM5803_GPADCC1_TINT_EN BIT(7) - -#define SM5803_REG_GPADC_CONFIG2 0x02 - -#define SM5803_REG_PSYS1 0x04 -#define SM5803_PSYS1_DAC_EN BIT(0) - -/* Note: Threshold registers all assume lower 2 bits are 0 */ -#define SM5803_REG_VBUS_LOW_TH 0x1A -#define SM5803_REG_VBATSNSP_MAX_TH 0x26 -#define SM5803_REG_VBUS_HIGH_TH 0x2A -#define SM5803_REG_VCHG_PWR_LOW_TH 0x1B -#define SM5803_REG_VCHG_PWR_HIGH_TH 0x2B -#define SM5803_REG_TINT_LOW_TH 0x1D -#define SM5803_REG_TINT_HIGH_TH 0x2D - -/* - * Vbus levels increment in 23.4 mV, set thresholds to below 3.5V and above 4.0V - * to mirror what TCPCI uses for Vbus present indication - */ -#define SM5803_VBUS_LOW_LEVEL 0x25 -#define SM5803_VBUS_HIGH_LEVEL 0x2C - - - -/* - * TINT thresholds. TINT steps are in 0.43 K with the upper threshold set to - * 360 K and lower threshold to de-assert PROCHOT at 330 K. - */ -#define SM5803_TINT_LOW_LEVEL 0xBF -#define SM5803_TINT_HIGH_LEVEL 0xD1 - -#define SM5803_TINT_MAX_LEVEL 0xFF -#define SM5803_TINT_MIN_LEVEL 0x00 - -/* - * Set minimum thresholds for VBUS_PWR_LOW_TH interrupt generation - * 2S battery 9.4v - * 3S battery 14.1V VBUS_PWR MIN TH - */ -#define SM5803_VBAT_PWR_MINTH_3S_LEVEL 0x9B -#define SM5803_VBAT_PWR_MINTH_2S_LEVEL 0x9B - -/* - * Set thresholds for VBATSNSP_MAX_TH GPADC interrupt generation - * 2S battery 9v - * 3S battery 13.3V - */ -#define SM5803_VBAT_SNSP_MAXTH_3S_LEVEL 0xD8 -#define SM5803_VBAT_SNSP_MAXTH_2S_LEVEL 0xDC - -/* IBAT levels - The IBAT levels increment in 7.32mA */ -#define SM5803_REG_IBAT_CHG_MEAS_MSB 0x44 -#define SM5803_REG_IBAT_CHG_MEAS_LSB 0x45 -#define SM5803_REG_IBAT_CHG_AVG_MEAS_MSB 0xC4 -#define SM5803_REG_IBAT_CHG_AVG_MEAS_LSB 0xC5 -#define SM5803_IBAT_CHG_MEAS_LSB GENMASK(1, 0) - -/* IBUS levels - The IBUS levels increment in 7.32mA */ -#define SM5803_REG_IBUS_CHG_MEAS_MSB 0x46 -#define SM5803_REG_IBUS_CHG_MEAS_LSB 0x47 -#define SM5803_IBUS_CHG_MEAS_LSB GENMASK(1, 0) - -#define SM5803_REG_VBUS_MEAS_MSB 0x48 -#define SM5803_REG_VBUS_MEAS_LSB 0x49 -#define SM5803_VBUS_MEAS_LSB GENMASK(1, 0) -#define SM5803_VBUS_MEAS_BAT_DET BIT(2) -#define SM5803_VBUS_MEAS_VBUS_SHORT BIT(4) -#define SM5803_VBUS_MEAS_OV_TEMP BIT(5) -#define SM5803_VBUS_MEAS_CHG_DET BIT(6) - -/* VCHGPWR levels - The VCHGPWR levels increment in 23.4mV steps. */ -#define SM5803_REG_VCHG_PWR_MSB 0x4A - -#define SM5803_REG_TINT_MEAS_MSB 0x4E - -/* VSYS levels - The VSYS levels increment in 23.4mV steps. */ -#define SM5803_REG_VSYS_MEAS_MSB 0x4C -#define SM5803_REG_VSYS_MEAS_LSB 0x4D -#define SM5803_REG_VSYS_AVG_MEAS_MSB 0xCC -#define SM5803_REG_VSYS_AVG_MEAS_LSB 0xCD -#define SM5803_VSYS_MEAS_LSB GENMASK(1, 0) - -/* Charger registers (address 0x32) */ - -#define SM5803_REG_CC_CONFIG1 0x01 -#define SM5803_CC_CONFIG1_SD_PWRUP BIT(3) - -#define SM5803_REG_FLOW1 0x1C -#define SM5803_FLOW1_MODE GENMASK(1, 0) -#define SM5803_FLOW1_DIRECTCHG_SRC_EN BIT(2) -#define SM5803_FLOW1_LINEAR_CHARGE_EN BIT(3) -#define SM5803_FLOW1_USB_SUSP BIT(7) - -enum sm5803_charger_modes { - CHARGER_MODE_DISABLED, - CHARGER_MODE_SINK, - CHARGER_MODE_RESERVED, - CHARGER_MODE_SOURCE, -}; - -#define SM5803_REG_FLOW2 0x1D -#define SM5803_FLOW2_AUTO_TRKL_EN BIT(0) -#define SM5803_FLOW2_AUTO_PRECHG_EN BIT(1) -#define SM5803_FLOW2_AUTO_FASTCHG_EN BIT(2) -#define SM5803_FLOW2_AUTO_ENABLED GENMASK(2, 0) -#define SM5803_FLOW2_FW_TRKL_CMD BIT(3) -#define SM5803_FLOW2_FW_PRECHG_CMD BIT(4) -#define SM5803_FLOW2_FW_FASTCHG_CMD BIT(5) -#define SM5803_FLOW2_HOST_MODE_EN BIT(6) -#define SM5803_FLOW2_AUTO_CHGEN_SET BIT(7) - -#define SM5803_REG_FLOW3 0x1E -#define SM5803_FLOW3_SWITCH_BCK_BST BIT(0) -#define SM5803_FLOW3_FW_SWITCH_RESUME BIT(1) -#define SM5803_FLOW3_FW_SWITCH_PAUSE BIT(2) -#define SM5803_FLOW3_SOFT_DISABLE_EN BIT(3) - -#define SM5803_REG_SWITCHER_CONF 0x1F -#define SM5803_SW_BCK_BST_CONF_AUTO BIT(0) - -#define SM5803_REG_ANA_EN1 0x21 -#define SM5803_ANA_EN1_CLS_DISABLE BIT(7) - -/* - * Input current limit is CHG_ILIM_RAW *100 mA - */ -#define SM5803_REG_CHG_ILIM 0x24 -#define SM5803_CHG_ILIM_RAW GENMASK(4, 0) -#define SM5803_CURRENT_STEP 100 -#define SM5803_REG_TO_CURRENT(r) ((r) * SM5803_CURRENT_STEP) -#define SM5803_CURRENT_TO_REG(c) ((c) / SM5803_CURRENT_STEP) - -/* - * DPM Voltage loop regulation contains the 8 bits with MSB register - * and the lower 3 bits with LSB register. - * The regulation value is 2.72 V + DPM_VL_SET * 10mV - */ -#define SM5803_REG_DPM_VL_SET_MSB 0x26 -#define SM5803_REG_DPM_VL_SET_LSB 0x27 - -/* - * Output voltage uses the same equation as Vsys - * Lower saturation value is 3 V, upper 20.5 V - */ -#define SM5803_REG_VPWR_MSB 0x30 -#define SM5803_REG_DISCH_CONF2 0x31 -#define SM5803_DISCH_CONF5_VPWR_LSB GENMASK(2, 0) - -/* - * Output current limit is CLS_LIMIT * 50 mA and saturates to 3.2 A - */ -#define SM5803_REG_DISCH_CONF5 0x34 -#define SM5803_DISCH_CONF5_CLS_LIMIT GENMASK(6, 0) -#define SM5803_CLS_CURRENT_STEP 50 - -#define SM5803_REG_DISCH_CONF6 0x35 -#define SM5803_DISCH_CONF6_RAMPS_DIS BIT(0) -#define SM5803_DISCH_CONF6_SMOOTH_DIS BIT(1) - -/* - * Vsys is 11 bits, with the lower 3 bits in the LSB register. - * The pre-regulation value is 2.72 V + Vsys_prereg * 10 mV - * Lower saturation value is 3V, upper is 20V - */ -#define SM5803_REG_VSYS_PREREG_MSB 0x36 -#define SM5803_REG_VSYS_PREREG_LSB 0x37 -#define SM5803_VOLTAGE_STEP 10 -#define SM5803_VOLTAGE_SHIFT 2720 -#define SM5803_REG_TO_VOLTAGE(r) (SM5803_VOLTAGE_SHIFT + \ - (r) * SM5803_VOLTAGE_STEP) -#define SM5803_VOLTAGE_TO_REG(v) (((v) - SM5803_VOLTAGE_SHIFT) \ - / SM5803_VOLTAGE_STEP) - -/* - * Precharge Termination threshold. - */ -#define SM5803_REG_PRE_FAST_CONF_REG1 0x39 -#define SM5803_VBAT_PRE_TERM_MIN_DV 23 -/* 3.8V+ gets rounded to 4V */ -#define SM5803_VBAT_PRE_TERM_MAX_DV 38 -#define SM5803_VBAT_PRE_TERM GENMASK(7, 4) -#define SM5803_VBAT_PRE_TERM_SHIFT 4 - -/* - * Vbat for fast charge uses the same equation as Vsys - * Lower saturation value is 3V, upper is dependent on number of cells - */ -#define SM5803_REG_VBAT_FAST_MSB 0x3A -#define SM5803_REG_VBAT_FAST_LSB 0x3B - -/* - * Fast charge current limit is ICHG_FAST * 100 mA - * Value read back may be adjusted if tempearture limits are exceeded - */ -#define SM5803_REG_FAST_CONF4 0x3C -#define SM5803_CONF4_ICHG_FAST GENMASK(5, 0) - -/* Fast charge Termination */ -#define SM5803_REG_FAST_CONF5 0x3D -#define SM5803_CONF5_IBAT_EOC_TH GENMASK(3, 0) - -/* IR drop compensation */ -#define SM5803_REG_IR_COMP1 0x3F -#define SM5803_IR_COMP_RES_SET_MSB GENMASK(7, 6) -#define SM5803_IR_COMP_RES_SET_MSB_SHIFT 6 -#define SM5803_IR_COMP_EN BIT(5) - -/* LSB is in 1.67mOhm steps. */ -#define SM5803_REG_IR_COMP2 0x40 - -/* Precharge current limit is also intervals of 100 mA */ -#define SM5803_REG_PRECHG 0x41 -#define SM5803_PRECHG_ICHG_PRE_SET GENMASK(5, 0) - -#define SM5803_REG_LOG1 0x42 -#define SM5803_BATFET_ON BIT(2) - -#define SM5803_REG_LOG2 0x43 -#define SM5803_ISOLOOP_ON BIT(1) - -#define SM5803_REG_STATUS_CHG_REG 0x48 -#define SM5803_STATUS_CHG_BATT_REMOVAL BIT(0) -#define SM5803_STATUS_CHG_CHG_REMOVAL BIT(1) -#define SM5803_STATUS_CHG_BATTEMP_NOK BIT(2) -#define SM5803_STATUS_CHG_CHGWDG_EXP BIT(3) -#define SM5803_STATUS_CHG_VBUS_OC BIT(4) -#define SM5803_STATUS_CHG_OV_VBAT BIT(5) -#define SM5803_STATUS_CHG_TIMEOUT BIT(6) -#define SM5803_STATUS_CHG_OV_ITEMP BIT(7) - -#define SM5803_REG_STATUS_DISCHG 0x49 -#define SM5803_STATUS_DISCHG_BATT_REM BIT(0) -#define SM5803_STATUS_DISCHG_UV_VBAT BIT(1) -#define SM5803_STATUS_DISCHG_VBUS_OC BIT(2) -#define SM5803_STATUS_DISCHG_VBUS_PWR GENMASK(4, 3) -#define SM5803_STATUS_DISCHG_ISO_CURR BIT(5) -#define SM5803_STATUS_DISCHG_VBUS_SHORT BIT(6) -#define SM5803_STATUS_DISCHG_OV_ITEMP BIT(7) - -#define SM5803_REG_CHG_MON_REG 0x5C -#define SM5803_DPM_LOOP_EN BIT(0) - -#define SM5803_REG_PHOT1 0x72 -#define SM5803_PHOT1_IBAT_PHOT_COMP_EN BIT(0) -#define SM5803_PHOT1_IBUS_PHOT_COMP_EN BIT(1) -#define SM5803_PHOT1_VSYS_MON_EN BIT(2) -#define SM5803_PHOT1_VBUS_MON_EN BIT(3) -#define SM5803_PHOT1_COMPARATOR_EN GENMASK(3, 0) -#define SM5803_PHOT1_DURATION GENMASK(6, 4) -#define SM5803_PHOT1_DURATION_SHIFT 4 -#define SM5803_PHOT1_IRQ_MODE BIT(7) - -#define CHARGER_NAME "sm5803" - -#define CHARGE_V_MAX 20000 -#define CHARGE_V_MIN SM5803_VOLTAGE_SHIFT -#define CHARGE_V_STEP SM5803_VOLTAGE_STEP - -#define CHARGE_I_MAX 6300 -#define CHARGE_I_MIN 0 -#define CHARGE_I_STEP SM5803_CURRENT_STEP - -#define INPUT_I_MAX 3100 -#define INPUT_I_MIN 0 -#define INPUT_I_STEP SM5803_CURRENT_STEP - -/* Expose cached Vbus presence */ -int sm5803_is_vbus_present(int chgnum); - -/* Expose functions to control charger's GPIO and CHG_DET configuration */ -enum ec_error_list sm5803_configure_gpio0(int chgnum, - enum sm5803_gpio0_modes mode, int od); -enum ec_error_list sm5803_set_gpio0_level(int chgnum, int level); -enum ec_error_list sm5803_configure_chg_det_od(int chgnum, int enable); -enum ec_error_list sm5803_get_chg_det(int chgnum, int *chg_det); - -/* Expose Vbus discharge function */ -enum ec_error_list sm5803_set_vbus_disch(int chgnum, int enable); -enum ec_error_list sm5803_vbus_sink_enable(int chgnum, int enable); - -void sm5803_hibernate(int chgnum); -void sm5803_interrupt(int chgnum); - -/** - * Return whether ACOK is high or low. - * - * @param chgnum index into chg_chips table. - * @param acok will be set to true if ACOK is asserted, otherwise false. - * @return EC_SUCCESS, error otherwise. - */ -enum ec_error_list sm5803_is_acok(int chgnum, bool *acok); - -/* Expose low power mode functions */ -void sm5803_disable_low_power_mode(int chgnum); -void sm5803_enable_low_power_mode(int chgnum); - -extern const struct charger_drv sm5803_drv; - -/* Expose interrupt handler for processing in PD_INT task when needed */ -void sm5803_handle_interrupt(int chgnum); - -#endif |