diff options
Diffstat (limited to 'driver/fingerprint/fpc/libfp/fpc_private.h')
| -rw-r--r-- | driver/fingerprint/fpc/libfp/fpc_private.h | 168 |
1 files changed, 94 insertions, 74 deletions
diff --git a/driver/fingerprint/fpc/libfp/fpc_private.h b/driver/fingerprint/fpc/libfp/fpc_private.h index bd9ff711b6..19ac3b7a13 100644 --- a/driver/fingerprint/fpc/libfp/fpc_private.h +++ b/driver/fingerprint/fpc/libfp/fpc_private.h @@ -1,4 +1,4 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. +/* Copyright 2018 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -10,83 +10,103 @@ /* External error codes from FPC's sensor library */ enum fpc_error_code_external { - FPC_ERROR_NONE = 0, - FPC_ERROR_NOT_FOUND = 1, - FPC_ERROR_CAN_BE_USED_2 = 2, - FPC_ERROR_CAN_BE_USED_3 = 3, - FPC_ERROR_CAN_BE_USED_4 = 4, - FPC_ERROR_PAL = 5, - FPC_ERROR_IO = 6, - FPC_ERROR_CANCELLED = 7, - FPC_ERROR_UNKNOWN = 8, - FPC_ERROR_MEMORY = 9, - FPC_ERROR_PARAMETER = 10, - FPC_ERROR_TEST_FAILED = 11, - FPC_ERROR_TIMEDOUT = 12, - FPC_ERROR_SENSOR = 13, - FPC_ERROR_SPI = 14, - FPC_ERROR_NOT_SUPPORTED = 15, - FPC_ERROR_OTP = 16, - FPC_ERROR_STATE = 17, - FPC_ERROR_PN = 18, - FPC_ERROR_DEAD_PIXELS = 19, - FPC_ERROR_TEMPLATE_CORRUPTED = 20, - FPC_ERROR_CRC = 21, - FPC_ERROR_STORAGE = 22, /**< Errors related to storage **/ - FPC_ERROR_MAXIMUM_REACHED = 23, /**< The allowed maximum has been reached **/ - FPC_ERROR_MINIMUM_NOT_REACHED = 24, /**< The required minimum was not reached **/ - FPC_ERROR_SENSOR_LOW_COVERAGE = 25, /**< Minimum sensor coverage was not reached **/ - FPC_ERROR_SENSOR_LOW_QUALITY = 26, /**< Sensor image is considered low quality **/ - FPC_ERROR_SENSOR_FINGER_NOT_STABLE = 27, /**< Finger was not stable during image capture **/ + FPC_ERROR_NONE = 0, + FPC_ERROR_NOT_FOUND = 1, + FPC_ERROR_CAN_BE_USED_2 = 2, + FPC_ERROR_CAN_BE_USED_3 = 3, + FPC_ERROR_CAN_BE_USED_4 = 4, + FPC_ERROR_PAL = 5, + FPC_ERROR_IO = 6, + FPC_ERROR_CANCELLED = 7, + FPC_ERROR_UNKNOWN = 8, + FPC_ERROR_MEMORY = 9, + FPC_ERROR_PARAMETER = 10, + FPC_ERROR_TEST_FAILED = 11, + FPC_ERROR_TIMEDOUT = 12, + FPC_ERROR_SENSOR = 13, + FPC_ERROR_SPI = 14, + FPC_ERROR_NOT_SUPPORTED = 15, + FPC_ERROR_OTP = 16, + FPC_ERROR_STATE = 17, + FPC_ERROR_PN = 18, + FPC_ERROR_DEAD_PIXELS = 19, + FPC_ERROR_TEMPLATE_CORRUPTED = 20, + FPC_ERROR_CRC = 21, + FPC_ERROR_STORAGE = 22, /**< Errors related to storage **/ + FPC_ERROR_MAXIMUM_REACHED = 23, /**< The allowed maximum has been + reached **/ + FPC_ERROR_MINIMUM_NOT_REACHED = 24, /**< The required minimum was not + reached **/ + FPC_ERROR_SENSOR_LOW_COVERAGE = 25, /**< Minimum sensor coverage was not + reached **/ + FPC_ERROR_SENSOR_LOW_QUALITY = 26, /**< Sensor image is considered low + quality **/ + FPC_ERROR_SENSOR_FINGER_NOT_STABLE = 27, /**< Finger was not stable + during image capture **/ }; /* Internal error codes from FPC's sensor library */ enum fpc_error_code_internal { - FPC_ERROR_INTERNAL_0 = 0, /* Indicates that no internal code was set. */ - FPC_ERROR_INTERNAL_1 = 1, /* Not supported by sensor. */ - FPC_ERROR_INTERNAL_2 = 2, /* Sensor got a NULL response (from other module). */ - FPC_ERROR_INTERNAL_3 = 3, /* Runtime config not supported by firmware. */ - FPC_ERROR_INTERNAL_4 = 4, /* CAC has not been created. */ - FPC_ERROR_INTERNAL_5 = 5, /* CAC returned an error to the sensor. */ - FPC_ERROR_INTERNAL_6 = 6, /* CAC fasttap image capture failed. */ - FPC_ERROR_INTERNAL_7 = 7, /* CAC fasttap image capture failed. */ - FPC_ERROR_INTERNAL_8 = 8, /* CAC Simple image capture failed. */ - FPC_ERROR_INTERNAL_9 = 9, /* CAC custom image capture failed. */ - FPC_ERROR_INTERNAL_10 = 10, /* CAC MQT image capture failed. */ - FPC_ERROR_INTERNAL_11 = 11, /* CAC PN image capture failed. */ - FPC_ERROR_INTERNAL_12 = 12, /* Reading CAC context size. */ - FPC_ERROR_INTERNAL_13 = 13, /* Reading CAC context size. */ - FPC_ERROR_INTERNAL_14 = 14, /* Sensor context invalid. */ - FPC_ERROR_INTERNAL_15 = 15, /* Buffer reference is invalid. */ - FPC_ERROR_INTERNAL_16 = 16, /* Buffer size reference is invalid. */ - FPC_ERROR_INTERNAL_17 = 17, /* Image data reference is invalid. */ - FPC_ERROR_INTERNAL_18 = 18, /* Capture type specified is invalid. */ - FPC_ERROR_INTERNAL_19 = 19, /* Capture config specified is invalid. */ - FPC_ERROR_INTERNAL_20 = 20, /* Sensor type in hw desc could not be extracted. */ - FPC_ERROR_INTERNAL_21 = 21, /* Failed to create BNC component. */ - FPC_ERROR_INTERNAL_22 = 22, /* BN calibration failed. */ - FPC_ERROR_INTERNAL_23 = 23, /* BN memory allocation failed. */ - FPC_ERROR_INTERNAL_24 = 24, /* Companion type in hw desc could not be extracted. */ - FPC_ERROR_INTERNAL_25 = 25, /* Coating type in hw desc could not be extracted. */ - FPC_ERROR_INTERNAL_26 = 26, /* Sensor mode type is invalid. */ - FPC_ERROR_INTERNAL_27 = 27, /* Wrong Sensor state in OTP read. */ - FPC_ERROR_INTERNAL_28 = 28, /* Mismatch of register size in overlay vs rrs. */ - FPC_ERROR_INTERNAL_29 = 29, /* Checkerboard capture failed. */ - FPC_ERROR_INTERNAL_30 = 30, /* Error converting to fpc_image in dp calibration. */ - FPC_ERROR_INTERNAL_31 = 31, /* Failed to capture reset pixel image. */ - FPC_ERROR_INTERNAL_32 = 32, /* API level not support in dp calibration. */ - FPC_ERROR_INTERNAL_33 = 33, /* The image data in parameter is invalid. */ - FPC_ERROR_INTERNAL_34 = 34, /* PAL delay function has failed. */ - FPC_ERROR_INTERNAL_35 = 35, /* AFD sensor commad did not complete. */ - FPC_ERROR_INTERNAL_36 = 36, /* AFD wrong runlevel detected after calibration. */ - FPC_ERROR_INTERNAL_37 = 37, /* Wrong rrs size. */ - FPC_ERROR_INTERNAL_38 = 38, /* There was a finger on the sensor when calibrating finger detect. */ - FPC_ERROR_INTERNAL_39 = 39, /* The calculated calibration value is larger than max. */ - FPC_ERROR_INTERNAL_40 = 40, /* The sensor fifo always underflows */ - FPC_ERROR_INTERNAL_41 = 41, /* The oscillator calibration resulted in a too high or low value */ - FPC_ERROR_INTERNAL_42 = 42, /* Sensor driver was opened with NULL configuration */ - FPC_ERROR_INTERNAL_43 = 43, /* Sensor driver as opened with NULL hw descriptor */ - FPC_ERROR_INTERNAL_44 = 44, /* Error occured during image drive test */ + FPC_ERROR_INTERNAL_0 = 0, /* Indicates that no internal code was set. */ + FPC_ERROR_INTERNAL_1 = 1, /* Not supported by sensor. */ + FPC_ERROR_INTERNAL_2 = 2, /* Sensor got a NULL response (from other + module). */ + FPC_ERROR_INTERNAL_3 = 3, /* Runtime config not supported by firmware. + */ + FPC_ERROR_INTERNAL_4 = 4, /* CAC has not been created. */ + FPC_ERROR_INTERNAL_5 = 5, /* CAC returned an error to the sensor. */ + FPC_ERROR_INTERNAL_6 = 6, /* CAC fasttap image capture failed. */ + FPC_ERROR_INTERNAL_7 = 7, /* CAC fasttap image capture failed. */ + FPC_ERROR_INTERNAL_8 = 8, /* CAC Simple image capture failed. */ + FPC_ERROR_INTERNAL_9 = 9, /* CAC custom image capture failed. */ + FPC_ERROR_INTERNAL_10 = 10, /* CAC MQT image capture failed. */ + FPC_ERROR_INTERNAL_11 = 11, /* CAC PN image capture failed. */ + FPC_ERROR_INTERNAL_12 = 12, /* Reading CAC context size. */ + FPC_ERROR_INTERNAL_13 = 13, /* Reading CAC context size. */ + FPC_ERROR_INTERNAL_14 = 14, /* Sensor context invalid. */ + FPC_ERROR_INTERNAL_15 = 15, /* Buffer reference is invalid. */ + FPC_ERROR_INTERNAL_16 = 16, /* Buffer size reference is invalid. */ + FPC_ERROR_INTERNAL_17 = 17, /* Image data reference is invalid. */ + FPC_ERROR_INTERNAL_18 = 18, /* Capture type specified is invalid. */ + FPC_ERROR_INTERNAL_19 = 19, /* Capture config specified is invalid. */ + FPC_ERROR_INTERNAL_20 = 20, /* Sensor type in hw desc could not be + extracted. */ + FPC_ERROR_INTERNAL_21 = 21, /* Failed to create BNC component. */ + FPC_ERROR_INTERNAL_22 = 22, /* BN calibration failed. */ + FPC_ERROR_INTERNAL_23 = 23, /* BN memory allocation failed. */ + FPC_ERROR_INTERNAL_24 = 24, /* Companion type in hw desc could not be + extracted. */ + FPC_ERROR_INTERNAL_25 = 25, /* Coating type in hw desc could not be + extracted. */ + FPC_ERROR_INTERNAL_26 = 26, /* Sensor mode type is invalid. */ + FPC_ERROR_INTERNAL_27 = 27, /* Wrong Sensor state in OTP read. */ + FPC_ERROR_INTERNAL_28 = 28, /* Mismatch of register size in overlay vs + rrs. */ + FPC_ERROR_INTERNAL_29 = 29, /* Checkerboard capture failed. */ + FPC_ERROR_INTERNAL_30 = 30, /* Error converting to fpc_image in dp + calibration. */ + FPC_ERROR_INTERNAL_31 = 31, /* Failed to capture reset pixel image. */ + FPC_ERROR_INTERNAL_32 = 32, /* API level not support in dp calibration. + */ + FPC_ERROR_INTERNAL_33 = 33, /* The image data in parameter is invalid. + */ + FPC_ERROR_INTERNAL_34 = 34, /* PAL delay function has failed. */ + FPC_ERROR_INTERNAL_35 = 35, /* AFD sensor commad did not complete. */ + FPC_ERROR_INTERNAL_36 = 36, /* AFD wrong runlevel detected after + calibration. */ + FPC_ERROR_INTERNAL_37 = 37, /* Wrong rrs size. */ + FPC_ERROR_INTERNAL_38 = 38, /* There was a finger on the sensor when + calibrating finger detect. */ + FPC_ERROR_INTERNAL_39 = 39, /* The calculated calibration value is + larger than max. */ + FPC_ERROR_INTERNAL_40 = 40, /* The sensor fifo always underflows */ + FPC_ERROR_INTERNAL_41 = 41, /* The oscillator calibration resulted in a + too high or low value */ + FPC_ERROR_INTERNAL_42 = 42, /* Sensor driver was opened with NULL + configuration */ + FPC_ERROR_INTERNAL_43 = 43, /* Sensor driver as opened with NULL hw + descriptor */ + FPC_ERROR_INTERNAL_44 = 44, /* Error occured during image drive test */ }; /* FPC specific initialization function to fill their context */ |