1 files changed, 0 insertions, 162 deletions
diff --git a/driver/ppc/aoz1380.c b/driver/ppc/aoz1380.c
deleted file mode 100644
index 4e2188c60d..0000000000
--- a/driver/ppc/aoz1380.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * AOZ1380 USB-C Power Path Controller
- *
- * This is a basic TCPM controlled PPC driver.  It could easily be
- * renamed and repurposed to be generic, if there are other TCPM
- * controlled PPC chips that are similar to the AOZ1380
- */
-
-#include "atomic.h"
-#include "common.h"
-#include "console.h"
-#include "aoz1380.h"
-#include "hooks.h"
-#include "system.h"
-#include "tcpm/tcpm.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpc.h"
-#include "usbc_ppc.h"
-
-#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
-#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
-
-static uint32_t irq_pending; /* Bitmask of ports signaling an interrupt. */
-
-#define AOZ1380_FLAGS_SOURCE_ENABLED    BIT(0)
-#define AOZ1380_FLAGS_SINK_ENABLED      BIT(1)
-#define AOZ1380_FLAGS_INT_ON_DISCONNECT BIT(2)
-static uint32_t flags[CONFIG_USB_PD_PORT_MAX_COUNT];
-
-#define AOZ1380_SET_FLAG(port, flag) atomic_or(&flags[port], (flag))
-#define AOZ1380_CLR_FLAG(port, flag) atomic_clear_bits(&flags[port], (flag))
-
-static int aoz1380_init(int port)
-{
-	flags[port] = 0;
-
-	if (tcpm_get_snk_ctrl(port))
-		AOZ1380_SET_FLAG(port, AOZ1380_FLAGS_SINK_ENABLED);
-
-	if (tcpm_get_src_ctrl(port))
-		AOZ1380_SET_FLAG(port, AOZ1380_FLAGS_SOURCE_ENABLED);
-
-	return EC_SUCCESS;
-}
-
-static int aoz1380_vbus_sink_enable(int port, int enable)
-{
-	int rv;
-
-	rv = tcpm_set_snk_ctrl(port, enable);
-	if (rv)
-		return rv;
-
-	/*
-	 * On enable, we want to indicate connection as a SINK.
-	 * On disable, clear SINK and that we have interrupted.
-	 */
-	if (enable)
-		AOZ1380_SET_FLAG(port, AOZ1380_FLAGS_SINK_ENABLED);
-	else
-		AOZ1380_CLR_FLAG(port, (AOZ1380_FLAGS_SINK_ENABLED |
-					AOZ1380_FLAGS_INT_ON_DISCONNECT));
-
-	return EC_SUCCESS;
-}
-
-static int aoz1380_vbus_source_enable(int port, int enable)
-{
-	int rv;
-
-	rv = tcpm_set_src_ctrl(port, enable);
-	if (rv)
-		return rv;
-
-	/*
-	 * On enable, we want to indicate connection as a SOURCE.
-	 * On disable, clear SOURCE and that we have interrupted.
-	 */
-	if (enable)
-		AOZ1380_SET_FLAG(port, AOZ1380_FLAGS_SOURCE_ENABLED);
-	else
-		AOZ1380_CLR_FLAG(port, (AOZ1380_FLAGS_SOURCE_ENABLED |
-					AOZ1380_FLAGS_INT_ON_DISCONNECT));
-
-	return EC_SUCCESS;
-}
-
-static int aoz1380_is_sourcing_vbus(int port)
-{
-	return flags[port] & AOZ1380_FLAGS_SOURCE_ENABLED;
-}
-
-static int aoz1380_set_vbus_source_current_limit(int port,
-						 enum tcpc_rp_value rp)
-{
-	return board_aoz1380_set_vbus_source_current_limit(port, rp);
-}
-
-/*
- * AOZ1380 Interrupt Handler
- *
- * This device only has a single over current/temperature interrupt.
- * TODO(b/141939343) Determine how to clear the interrupt
- * TODO(b/142076004) Test this to verify we shut off vbus current
- * TODO(b/147359722) Verify correct fault functionality
- */
-static void aoz1380_handle_interrupt(int port)
-{
-	/*
-	 * We can get a false positive on disconnect that we
-	 * had an over current/temperature event when we are no
-	 * longer connected as sink or source.  Ignore it if
-	 * that is the case.
-	 */
-	if (flags[port] != 0) {
-		/*
-		 * This is a over current/temperature condition
-		 */
-		ppc_prints("Vbus overcurrent/temperature", port);
-		pd_handle_overcurrent(port);
-	} else {
-		/*
-		 * Just in case there is a condition that we will
-		 * continue an interrupt storm, track that we have
-		 * already been here once and will take the other
-		 * path if we do this again before setting the
-		 * sink/source as enabled or disabled again.
-		 */
-		AOZ1380_SET_FLAG(port, AOZ1380_FLAGS_INT_ON_DISCONNECT);
-	}
-}
-
-static void aoz1380_irq_deferred(void)
-{
-	int i;
-	uint32_t pending = atomic_clear(&irq_pending);
-
-	for (i = 0; i < board_get_usb_pd_port_count(); i++)
-		if (BIT(i) & pending)
-			aoz1380_handle_interrupt(i);
-}
-DECLARE_DEFERRED(aoz1380_irq_deferred);
-
-void aoz1380_interrupt(int port)
-{
-	atomic_or(&irq_pending, BIT(port));
-	hook_call_deferred(&aoz1380_irq_deferred_data, 0);
-}
-
-const struct ppc_drv aoz1380_drv = {
-	.init = &aoz1380_init,
-	.is_sourcing_vbus = &aoz1380_is_sourcing_vbus,
-	.vbus_sink_enable = &aoz1380_vbus_sink_enable,
-	.vbus_source_enable = &aoz1380_vbus_source_enable,
-	.set_vbus_source_current_limit =
-		&aoz1380_set_vbus_source_current_limit,
-};